User´s Manual - I+ME ACTIA GmbH

Session Template
The following is highly recommended to be done only by experienced PC
users.
When creating a new session CAT automatically uses the settings of the session template as default
values for the new session. Depending on the PC system these default values may not fit totally the
requirements.
To create the own session template do the following steps:
- Setup a session corresponding to the PC system and general needs:
- link to a database,
- set the layout for the graphical user interface (e.g. windows arrangements),
- configure the filter, trigger, transmit frames and diagnostics
- setup the system for the buffer usage and for the usually connected CAN bus.
- Look for the S# in brackets that is written in the title bar behind the name given to the session.
Note: All session related data are stored in session folders named S# (S1, S2, ...). These folders are
located in the folder "CAT_Destination_Folder"\Session (CAT_Destination_Folder is the folder that
have been chosen when installing CAT).
- Copy the content of this S# folder into the folder ...\Session\Template, especially the files session.cfg and
session.wsp.
Use the standard file managing programs (like Explorer or File Manager) to copy this files.
The next time when creating a session, the done settings will be the default values.
56