User´s Manual - I+ME ACTIA GmbH

Diagnostic Online View
The Diagnostic Online View shown below displays the diagnostic service frames and data (request and
response) according to the settings done offline respectively diagnostic offline. The Diagnostic Online
View is only in diagnostic online mode available. The data according to the logged data are displayed.
Time:
The accumulated time after going online is updated each time when the diagnostic frame is received.
Type:
Displays if the diagnostic frame is in USDT (Unacknowledged Segmented Data Transfer) or UUDT
(Unacknowledged Unsegmented Data Transfer) messaging format and if the frame is a request (by the
tester) or a response (by an ECU).
Service:
Displays the name of the Diagnostic Service with this frame ID (if known by CAT).
ID:
Displays the CAN Identifier of the diagnostic frame as hexadecimal value.
Format:
Displays the Format of the diagnostic frame (STD for standard 11bit ID and XTD for extended 29 bit
ID).
Data:
Displays the Data that are carried by the diagnostic frame as hexadecimal value.
Additional row below Type, Service, etc:
For service "Read Trouble Codes" only: Displays the Interpretation of the hexadecimal DTC data into
the standard SAE DTC code.
Note: When going diagnostic online the Online Diagnostic Launch window is opened automatically.
35