User´s Manual - I+ME ACTIA GmbH

Diagnostic Output
The Diagnostic Output window shown below displays all diagnostic relevant frames and data that are
acquired if CAT recognizes them as Diagnostic data. The Diagnostic Output window is only diagnostic
offline available. The data according to the logged data are displayed. The actual buffer entry is shown
on the top of the Diagnostic Output window. (See also Buffer Handling)
Time:
The accumulated time after going online is updated each time when the diagnostic frame is received.
Delta:
The delta time is shown in ms,ms/10 between the actual receiving of the diagnostic frame and the last
receiving of the same frame (with the same ID).
Type:
Displays if the diagnostic frame is in USDT (Unacknowledged Segmented Data Transfer) or UUDT
(Unacknowledged Unsegmented Data Transfer) messaging format and if the frame is a request (by the
tester) or a response (by an ECU).
Service:
Displays the name of the Diagnostic Service with this frame ID (if known by CAT).
ID:
Displays the CAN Identifier of the diagnostic frame as hexadecimal value.
Format:
Displays the Format of the diagnostic frame (STD for standard 11bit ID and XTD for extended 29 bit
ID).
Data:
Displays the Data that are carried by the diagnostic frame as hexadecimal value.
Additional row below Type, Service, etc:
Displays the Interpretation of the Data that are carried by the diagnostic frame as real text.
Note: You may assign a color to each service. See Layout Settings for details.
33