User´s Manual - I+ME ACTIA GmbH

Signal List View
The Signal List shown below displays up to 20 signals but only the signals that are selected to be
displayed (see Signal List Configuration). Online the most recently acquired data carried by a frame
will be interpreted and displayed. In Offline mode the data according to the logged data of the actual
buffer entry will be displayed. (See Buffer Handling )
The color of the characters for the signal value changes from black to red and vice versa each time the
same signal is received again.
Time:
The accumulated time after going online is updated each time when the frame is received. Online the
time is shown in ms,ms/10. Offline the time is shown as hour:min:sec,ms.
Delta:
Only available offline the delta time is shown in ms,ms/10 between the actual receiving of the frame
and the last receiving of the same frame (with the same ID).
Name:
Displays the defined name of the signal.
Value:
Displays the interpreted value in accordance to the Data carried by the received frame.
Unit:
Displays the defined Unit of the signal.
See also how to define a Signal and how to configure the Signal List for more details.)
31