User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Diagnostic Online Mode<br />
The Diagnostic Online Mode gives the user the ability easily to send diagnostic services even periodically and to see<br />
directly the corresponding responses. The set up of a diagnostic service to be transmitted is much easier in diagnostic<br />
online mode than in online mode. Opposite to the Online Mode it is possible to visualize the whole communication<br />
process: Request, Multi-Frame Responses and also Flow Control Frames.<br />
Additionally the DTC read out by service "Read Trouble Codes" are converted from hexadecimal DTC data into the<br />
SAE DTC code.<br />
The Diagnostic Online Mode of CAT allows visualizing and logging the diagnostic service that has<br />
been launched and the response to this service. See Changing CAT Modes for details about how to go<br />
Diagnostic Online.<br />
For visualization the Diagnostic Online Mode offers to open the:<br />
Diagnostic Online View<br />
Displaying the diagnostic service request and even multi frame respond.<br />
Additionally the user can open the<br />
it<br />
Online Diagnostic Launch window<br />
Displaying the addressing and Tester Present status of the selected Diagnostic Service and how<br />
will be transmitted.<br />
Being Diagnostic Online the received and transmitted data are logged to the buffer on CAT Hardware.<br />
The Buffer content is first stored only on the Hardware. Only after uploading the buffer there is access<br />
to this data in the Offline respectively Diagnostic Offline Mode.<br />
! If the user disconnects the Hardware from the Power Supply (by disconnecting the CAN<br />
adapter cable) and has not uploaded the buffer the user will loose the logged data!<br />
23
Change language