User´s Manual - I+ME ACTIA GmbH

Offline Mode
The Offline Mode of CAT allows the user to analyze logged data received from the bus and to
configure sessions and to maintain databases. (See Session Handling, Database Editing, Configurations)
See Changing CAT Modes for details about how to go Offline.
For Analyzing the Offline Mode offers:
Frame List View
Displaying up to 10 frames that has been selected to be displayed
Trace List View
Displaying all frames that has been logged (after buffer upload).
Note: Trace List View and Frame List View exclude each other; opening one closes
automatically the other.
Signal List View
Displaying up to 20 signals that has been selected to be displayed
Status Bar
Displaying always the most recently received frame from the bus.
For details see also the Offline Analyzer Mode .
! If the user disconnects the Hardware from the Power Supply (by disconnecting the CAN
adapter cable) and has not uploaded the buffer the user will loose the logged data!
Configuration of a session means to
- Setup the layout of the windows for all modes.
- Setup the System (CAN parameters and Buffer usage).
- Configure the filter and trigger conditions.
- Define Transmit Frames.
- Setup Diagnostic services.
See also the chapters "Layout Setup", "System Setup", "Configurations" and "Session Handling".
Maintaining a database means to
- Create, Edit or Remove the database content:
Vehicles
ECUs,
Frame,
Signals.
See also chapter "Database Maintaining".
Export Buffer
21