User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Online Mode<br />
The Online Mode of CAT allows visualizing and logging the traffic on the bus. See Changing CAT<br />
Modes for details about how to go Online.<br />
For visualization the Online Mode offers:<br />
20<br />
Frame List View<br />
Displaying up to 10 frames that has been selected to be displayed<br />
Signal List View<br />
Displaying up to 20 signals that has been selected to be displayed<br />
Status Bar<br />
Displaying always the most recently received frame from the bus.<br />
Additionally the user can open:<br />
Transmit Table<br />
Displaying the names of up to 10 frames that has been defined to be transmitted.<br />
Main Diagnostic Launch Table<br />
Displaying the addressing of some Diagnostic Services that are supported by CAT.<br />
Note: The configuration / setup of the Main Diagnostic Launch Table is even possible when being<br />
online already by opening the Main Diagnostic Setup dialog under Configurations.<br />
Being Online the received and transmitted data are logged to the buffer on CAT Hardware. The Buffer<br />
content is first stored only on the Hardware. Only after uploading the buffer there is access to this data<br />
in the Offline respectively Diagnostic Offline Mode.<br />
! If the user disconnects the Hardware from the Power Supply (by disconnecting the CAN<br />
adapter cable) and has not uploaded the buffer the user will loose the logged data!<br />
CAT allows in online mode the following actions:<br />
- Activating the self defined Filter ,<br />
- Causing a Trigger event,<br />
- Transmitting self defined transmit frames ,<br />
- Launch Diagnostic services,<br />
- Arranging the windows.
Change language