User´s Manual - I+ME ACTIA GmbH

Note: There is no visible scrolling by changing the position of the entries only the data and
color change. Have a look to the Status Bar where the time is changing.
- Status Bar
In the Status Bar every buffer entry is visible.
To review the buffer content there are several auxiliary features to support the user. The user may use
hot keys or the scroll bar to scroll one by one or stepwise in a defined step size. See Scrolling Step Size
for details. To jump directly to certain entries use the command Find It . To reach the Trigger event
simply press "T" as hot key.
Do NOT wait when uploading.
If the information window shown below displaying the status of the buffer upload process should be
open, shift it to the side and click into the window that shall be used. Then use the hot keys for buffer
scrolling to review the logged data.
Although the Upload process is not finished the user can jump to the end of the buffer (using the End
key). CAT will load immediately the required data. So there is no need to wait for the finish of the
upload.
Note: The green bar symbolizes the status of the upload of the logging buffer and the yellow bar
symbolizes the status of the upload of the diagnostic buffer.
183