User´s Manual - I+ME ACTIA GmbH

Signal List
CAT allows the user to select twenty signals to be display On- and Offline in the Signal List View
window. The user has to choose the already defined signals from the database. CAT also provides the
ability to display DPID related signals that have been defined for each DPID.
The Signal List Configuration window -that is also used to edit signals is used to choose the received
signals that shall be displayed in the Signal List View window.
Add Signals to be displayed
Choose menu item Configurations | Signal List from the main window to open the Signal List
Configuration ... window shown above.
Note: If the "Show DPID List" box is unmarked "Frame:" selection field under the ECU selection
field replaces "DPID:".
You choose the assigned ECU, Frame and then the Signal(s) to be added to the Signal List View.
Then click on the >> button to add the selected signals(s) to the "Display Signals" List. Click on OK to
acknowledge the input.
Add DPID Signals to be displayed
Choose menu item Configurations | Signal List from the main window to open the Signal List
Configuration ... window shown above.
Enable "Show DPID List", and then choose the assigned ECU, DPID and then the DPID Signal(s) to be
added to the Signal List View.
Click on the >> button to add the selected DPID Signals(s) to the "Display Signals" List. Click on OK
to acknowledge the input.
Remove (DPID) Signals to be displayed
153