User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Request for one-shot response message(s) (one UUDT message for each requested DPID). The ECU<br />
shall send a single UUDT diagnostic response message for each requested DPID.<br />
Schedule At Slow Rate<br />
Request to schedule DPID(s) in the request at slow periodic rate.<br />
Schedule At Medium Rate<br />
Request to schedule DPID(s) in the request at medium periodic rate.<br />
Schedule At Fast Rate<br />
Request to schedule DPID(s) in the request at fast periodic rate.<br />
DPIDs to be requested<br />
These are the DPID numbers that are requested. The data values identify to the corresponded node<br />
which DPID(s) to transmit or stop transmitting (as indicated by the preceding sub-function parameter<br />
byte).<br />
Selectable DPIDs<br />
These are the DPID numbers that have been defined for the ECU that is addressed to this service. See<br />
Main Diagnostic Setup Window for details about how to choose the ECU and how to address services.<br />
DPID Definition<br />
Use the DPID Definition button to create, edit or remove DPIDs of the DPID List of the chosen ECU.<br />
See DPID List for details how to use it. See Main Diagnostic Setup Window for details about how to<br />
chose the ECU.<br />
140