User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
User´s Manual - I+ME ACTIA GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DPID List<br />
CAT allows editing or removing already existing Data Packet Identifier (DPID) assigned to an ECU. Also new DPIDs<br />
might be created using CAT.<br />
CAT provides two different ways to enter the DPID List shown below.<br />
When editing or creating an ECU of a chosen database there is access to this list by click on the DPID List button.<br />
There is another access when configuring the diagnostic service ($AA) Read Data by Packet Identifier .<br />
New DPID<br />
Click on Create to build up a new DPID.<br />
The DPID Definition ... window will appear (see below). Input any Symbolic Name up to 20 characters<br />
and select an ID hexadecimal value between $01 and $7F. Then the user can create signals for this<br />
DPID. (See DPID Signals for details.) Click on OK to acknowledge the input.<br />
Edit DPID<br />
Choose the DPID you want to edit from the DPID List. Click on Edit to change the name, ID and<br />
assigned signals of the DPID.<br />
The DPID Definition ... window will appear (see below). Input any Symbolic Name up to 20 characters<br />
and select an ID hexadecimal value between $01 and $7F. Then the user can create, edit or remove<br />
signals for this DPID. (See DPID Signals for details.) Click on OK to acknowledge the input.<br />
Remove DPID<br />
Choose the DPID you want to remove from the DPID List. Click on Remove to erase the DPID. There<br />
will be a warning asking if the DPID really shall be removed.<br />
105
Change language