User´s Manual - I+ME ACTIA GmbH

CPID Table
CAT provides two different ways to enter the Control Packet Identifier (CPID) Table shown below.
When editing or creating an ECU of a chosen database there is access to this CPID Table shown below
by click on the CPID Table button.
There is another indirect access when setting up the service ($AE) Device Control. See Device Control
for details.
The first column shows the Control Packet Identifier (CPID) assigned to the chosen ECU. The 5 Bytecolumns
contain the CPID Control Bytes that are used to provide output control information. However,
it is not required that a CPID contains 5 bytes of control information.
Put in up to ten CPIDs and assigned control bytes by clicking into the corresponding fields.
Acknowledge the settings by OK.
104