Boker Knifestyle | Edition 2020 / 2021 | English

64 WORKSHARP CULINARY
WORKSHARP CULINARY
The Work Sharp Culinary series takes sharpening
kitchen knives to a new level. The device offers
angle guides and timer-controlled sharpening intervals,
as well as different speeds for the integrated
grinding belts to ensure easy handling. The automated
maintenance-free dust removal system and
the low noise level make operation clean and
quiet so that your countertop doesn‘t mutate into
a workbench. But the Worksharp Culinary series
offers even more innovation: who doesn‘t know the
high effectiveness of a fine serrated edge when it
comes to cutting tomatoes, etc.? With the Ceramic
Grinding Stick with integrated MicroForge (depending
on model) included in the scope of delivery,
you can provide your smooth favourite knife within
seconds with a highly effective micro-serrated edge,
which significantly increases the cutting pleasure.
By removing the knife from the grinding belt, this
micro-wave sharpening can also be easily converted
back into a smooth cutting edge.
1 E5 CULINARY SHARPENER
The premium model comes with 3 sharpening
speeds: for creating an edge, for sharpening
and stropping. Fully automated timer control for
perfectly calibrated sharpening intervals. The additional
ceramic rod (usable length: 20 cm) with a
coarse-grain and fine-grain grinding surface and
an angle guide can be used to touch up the edge.
It also offers the MicroForge to turn a straight edge
into a micro-serrated edge in seconds. Power: 220V.
Comes with 3 grinding belts (medium /P120).
Item No. 09DX051 € 199,95
2 M3 CULINARY SHARPENING ROD
The Work Sharp Culinary M3 with exchangeable
sharpening rod insert, a conical diamond rod for
pre-grinding and a two-level ceramic rod (medium
and fine) for stropping. Integrated angle guide for
easy touch-up sharpening. With the also integrated
MicroForge, you can turn any straight edge into a
micro-serrated edge in just seconds, which significantly
increases cutting performance. The insert is
easy to change. Sharpening rod length: 20 cm.
Item No. 09DX053 € 54,95
3 E5 UPGRADE KIT
Upgrade kit for the discerning knife owner with
even more specific options for adjusting the Work
Sharp Culinary E5 to various grinds and angles.
Changing the angle guide to 15° (for Japanese-style
knives) or 20° (for western kitchen knives) only
takes seconds. The kit also includes 5 belts with 4
different grains (1x coarse/120ZA, 2x medium/120,
1x X30 AO/fine and 1x X4 AO/ultra-fine).
Item No. 09DX054 € 49,95
4 MASTER BELT KIT
Five replacement belts for the Work Sharp Culinary
E5 Upgrade Kit: 1x coarse/120ZA, 2x medium/120,
1x X30 AO/fine and 1x X4 AO/ultra-fine.
Item No. 09DX055 € 17,95
5 REPLACEMENT BELT KIT
Three replacement belts (standard grain/P120) for
the Work Sharp Culinary E3 and Culinary E5.
Item No. 09DX056 € 10,95