STEEL + TECHNOLOGY 01/2020 EXTRACT
STEEL + TECHNOLOGY 01/2020 EXTRACT
STEEL + TECHNOLOGY 01/2020 EXTRACT
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NEWS ROUND-UP | 23<br />
FRANCE<br />
Ascoval to revamp special steel caster<br />
Danieli is going to revamp the fourstrand<br />
caster, which it had supplied to<br />
Ascoval Saint Saulve in 2007.<br />
Originally designed for the production of<br />
180 to 325 mm rounds, the caster’s product<br />
range will now be extended to include<br />
square billets of 150 to 240 mm and rectangular<br />
blooms of 300 mm x 365 mm.<br />
High-grade rail steel as well as engineering<br />
steel grades for industrial applications will<br />
be processed, last but not least enabled by<br />
the Danieli Rotelec final electromagnetic<br />
stirrers and the slow cooling system. Hot<br />
tests are scheduled for August <strong>2020</strong>.<br />
• Danieli<br />
GERMANY<br />
Salzgitter enters field of commercial hydrogen production<br />
Salzgitter Flachstahl GmbH (SZFG) has<br />
awarded Siemens Gas and Power an<br />
order to build a 2.2 MW Proton Exchange<br />
Membrane (PEM) electrolysis plant.<br />
The PEM plant is due to commence operation<br />
in the 4th quarter of <strong>2020</strong> and cover<br />
SZFG’s entire current demand for hydrogen.<br />
The necessary electrical power will<br />
be generated by seven wind turbines with<br />
a capacity of 30 MW. These will be erected<br />
by Avacon AG on the Salzgitter Group<br />
site and will likewise enter service from<br />
<strong>2020</strong>.<br />
Salzgitter AG Executive Board Chairman<br />
Professor Heinz Jörg Fuhrmann<br />
commented: “We are proud to be pioneers<br />
in the industrial application of<br />
hydrogen in the steel industry. As our<br />
SALCOS project has demonstrated, we<br />
are technologically in a position to<br />
achieve significant reductions in CO 2<br />
with the aid of hydrogen. The Salzgitter<br />
wind hydrogen project is an important<br />
building block on the way towards climate-friendly<br />
steel production. It is<br />
now the turn of politicians to put in<br />
place the right conditions to support<br />
the transformation into a low-CO 2<br />
industry.”<br />
Hydrogen has long played a role in<br />
steelmaking, particularly in enhancing the<br />
quality of annealing processes. The gas<br />
is currently supplied by Linde AG, and<br />
this company will in future continue to<br />
safeguard Salzgitter’s own production. A<br />
containerized plant will be erected in<br />
Salzgitter which at full capacity will produce<br />
400 Nm³ of hydrogen. PEM technology<br />
is ideally suited to exploiting the volatile<br />
generation of wind and solar power.<br />
The highly dynamic mode of operation<br />
allows the plants to respond to demands<br />
resulting from the rapidly fluctuating power<br />
supply.<br />
• Salzgitter AG, Siemens<br />
ITALY<br />
Acciaierie Venete installs bar finishing equipment<br />
Acciaierie Venete has commissioned the<br />
Danieli Drawer 550 finishing line for SBQ<br />
bars.<br />
The new Danieli finishing line is<br />
designed for the production of 18 to<br />
82.5 mm diameter rounds and squares<br />
from 30 to 60 mm. Covered by Danieli<br />
patents, the Drawer technology allows<br />
the production of ready-to-use, hotrolled<br />
bars with tight dimensional tolerances<br />
of 1/8 DIN. Round bars can be<br />
produced by normalized rolling and thermomechanical<br />
rolling. The finishing line<br />
consists of four rolling components:<br />
units Nos. 1 and 2 are equipped with<br />
two and units Nos. 3 and 4 with four<br />
rolling rings each.<br />
Danieli has implemented free-size rolling<br />
technology, i.e. a family of finished<br />
product diameters can be produced from<br />
one entry feedstock section with one set<br />
The project team at Acciaierie Venete (Picture: Danieli)<br />
of Drawer rolling units. Rolled stock dimensions<br />
and surface qualities are monitored<br />
by Danieli Automation Hi-Profile gauges<br />
installed at the Drawer entry and exit<br />
sides. The Q-Shape automation package<br />
controls the operating parameters in a<br />
closed loop, ensuring that the finished<br />
product dimensions are within the requested<br />
tolerance.<br />
• Danieli<br />
<strong>STEEL</strong> + <strong>TECHNOLOGY</strong> 2 (<strong>2020</strong>) No. 1