It's Time for an Electrical Wiring Upgrade

It's Time for an Electrical Wiring
Upgrade
When was the time you checked about your home’s electrical system? There are very few people who
check their household electrical system from time to time. Often times, we ignore signs that scream for
an electrical update. If you haven’t checked, it’s time to inspect your house for any electrical upgrades.
Don’t assume that everything is working fine. You can call electrician Perth if you are not sure how to
inspect.
Round 7 per cent of all fires are caused due to electrical problems. If your house has outdated wiring,
you are on a high risk. Don’t be hesitant to make an electrical upgrade. To provide your family with a
safe home, it is important to check the house for any electrical issues.
Here we are providing a list of things that will tell you if your house is in need for an electrical upgrade
Faulty Wiring Issues
One of the leading causes of accidents is faulty wiring. If you have an old house, you are on the high risk
of a fire accident caused by faulty wiring. The signs of faulty wiring are:

Flickering or dimming of lights: When there is faulty wiring, it affects the lights. Faulty wiring
causes flickering or dimming of lights. If it is a frequent phenomenon in your home, know that
there is some electrical home that needs attention.
A Slight shock when you touch appliances: Faulty wiring causes shock when you touch the
appliances. So next time you feel a tingling sensation while touching appliances, call electrician
Perth to check for the faulty wiring.
A Persistent burning smell: Do you get a persistent burning smell in your house? The reason
could be faulty wiring. It is essential to get it checked if you get burning smell in your house and
you are not sure of the cause as most likely the cause would be faulty wiring.
Discoloured power outlets: Discoloured or sparky outlets are a result of faulty wiring. Don’t
ignore the sign and call an electrician to solve the problem.
Installing New Appliances
Before installing any new devices; especially devices that require a lot of electricity such as an air
conditioner, hot tub, refrigerator, or any other appliance that consumes a lot of electricity, it is best to
check if your electrical panel can take the load. If amps don’t meet your electrical needs, you will see
that circuit breakers will trip whenever you switch on these appliances.
Replace the Fuse with Circuit Breakers
The role of fuse and circuit breakers is the same; they prevent overload or short circuit by disrupting
electrical currents. Fuses melt when they detect current is running at a level that is way too high. Fuses
are for one time use. On the other hand circuit breakers simply have to be reset; they can be used again
and gain. Fuses are outdated; if you still have fuses, it is best to replace them with circuit breakers.
Final Words
It is best to be on the safer side and call an electrician for your household need, even if it is for ceiling
fan installation. In the case of electricity, don’t try to be a DIY expert. A good electrician can offer you
solutions which will prove beneficial for you even in the future.
Source Link: https://bit.ly/2O4TuIi