(NL) Prijslijst COOL-FIT 4.0 2020
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Georg Fischer N.V.<br />
<strong>Prijslijst</strong> Nederland<br />
geldig vanaf januari <strong>2020</strong><br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Pre-insulated system for industrial<br />
and commercial refrigeration
GF Piping Systems<br />
Building the lifelines<br />
of the world<br />
GF Piping Systems is the global specialist for the safe and reliable transportation<br />
of water, chemicals, and gas. Customers in more than 100 countries implement<br />
our solutions to work more safely, efficiently, and cost-effectively.<br />
Your partner for modern plastic systems<br />
Customers in more than 100 countries are already working<br />
with the plastic piping systems that GF Piping Systems<br />
introduced more than 60 years ago. They are maintenancefree,<br />
resistant to corrosive and aggressive media, and are<br />
extremely durable. Their low weight, compared to metal<br />
systems, reduces static and logistic requirements. An<br />
innovative design and modern jointing technologies allow<br />
faster and easier installations. All this helps our customers<br />
to work more safely, efficiently, and cost-effectively.<br />
Support throughout the transition from metal to plastic<br />
systems is a key focus for our specialists.<br />
Maintenance-free plastic<br />
Plastics are corrosion-free and maintenance-free. They<br />
have excellent chemical resistance and last as long as the<br />
system itself, which is more than 25 years.<br />
Complete system solutions<br />
Our portfolio of more than 60,000 products offers<br />
complete system solutions, meaning you get perfectly<br />
matched components from a single source.<br />
Local support<br />
GF Piping Systems specialists are located in 34 countries<br />
and are therefore always close at hand, meaning that<br />
advice and on-site practical assistance is never far away.<br />
Partner in all project phases<br />
The specialists from GF Piping Systems support you<br />
throughout all phases of your project – starting from the<br />
planning stage, right through to commissioning. This<br />
reduces both the time required and risks.<br />
Many years of experience<br />
GF Piping Systems is a division of Georg Fischer AG, based<br />
in Schaffhausen, Switzerland, which was established in<br />
1802. You benefit from our many years of experience.<br />
1<br />
1
Efficient cooling with <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Poor insulation and corroding piping in cooling systems are<br />
more than just a nuisance, they pose a hazard to production<br />
safety and product quality. Moreover, they cause unnecessarily<br />
high maintenance and energy costs. GF Piping Systems<br />
offers solutions to help you to optimize your cooling system<br />
from the ground up. These solutions ensure continuous<br />
production processes, reduce operational downtimes due to<br />
leakages and other corrosion damage, and cut your maintenance<br />
and operating costs.<br />
The pre-insulated <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> piping system for commercial<br />
and industrial refrigeration is particularly beneficial for food<br />
and beverage manufacturers and processors. On the following<br />
pages, you will find out more about safe and efficient cooling<br />
with <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> and how this system can support you.<br />
Content<br />
Building the lifelines of the world<br />
Partner with GF Piping Systems<br />
Safe cooling has never been so easy<br />
The benefits of <strong>COOL</strong>-<strong>FIT</strong> for you<br />
Increased safety and efficiency<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> for commercial<br />
and industrial refrigeration<br />
Applications<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> in food and beverage production,<br />
cold stores, and breweries<br />
Connected within just a few minutes<br />
Safe and reliable with electrofusion<br />
1 − 2<br />
3 − 4<br />
5 − 8<br />
9 − 14<br />
15 − 16<br />
Heat Tracing<br />
Effective solution for freeze protection<br />
The Tool Box<br />
Safe and reliable with electrofusion<br />
Product range<br />
The entire <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> product range<br />
Index<br />
17<br />
18<br />
19-55<br />
56-58<br />
2
<strong>COOL</strong>-<strong>FIT</strong><br />
Safe, efficient cooling<br />
has never been<br />
so easy<br />
<strong>COOL</strong>-<strong>FIT</strong> is the successful range of pre-insulated plastic piping systems from GF Piping Systems.<br />
It makes cooling applications more efficient than ever before – in all phases of your project. <strong>COOL</strong>-<strong>FIT</strong><br />
simplifies planning and installation through superior design, pre-insulation, low weight, and modern<br />
jointing technologies. <strong>COOL</strong>-<strong>FIT</strong> reduces costs through completely maintenance-free operation,<br />
energy efficiency, and longevity (more than 25 years). <strong>COOL</strong>-<strong>FIT</strong> is environmentally friendly, thanks<br />
to its low carbon dioxide emissions throughout the entire service life of the product. The specialists<br />
at GF Piping Systems support you in this during all project phases.<br />
3
100%<br />
The media pipe, insulation, and jacket are made of plastic<br />
and therefore remain corrosion- and maintenance-free<br />
throughout the entire operating life of the system. This<br />
reduces expensive downtimes and lowers maintenance<br />
costs and personnel requirements.<br />
100%<br />
The especially smooth interior surfaces of the medium pipe,<br />
typical for plastic systems, prevent deposits. The result: no<br />
loss of pressure over the entire service life. <strong>COOL</strong>-<strong>FIT</strong><br />
remains as efficient as on its first day of operation.<br />
65%<br />
maintenance-free<br />
reliable<br />
less weight<br />
<strong>COOL</strong>-<strong>FIT</strong> is significantly lighter than traditional metal systems<br />
and therefore places lower structural demands on buildings<br />
and supporting structures. The use of heavy transport aids can<br />
be reduced at the construction site.<br />
50%<br />
faster installation<br />
Factory pre-insulation eliminates the need for traditional<br />
insulation after the installation, which often requires a second<br />
team. You receive finished and permanently pre-insulated<br />
components, ready for immediate installation.<br />
30%<br />
higher energy efficiency<br />
In combination, the low thermal conductivity of plastic and the<br />
highly efficient foam insulation increase the energy efficiency<br />
of your system. This helps you to save energy costs and makes<br />
your work more environmentally friendly.<br />
4
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Maximum safety<br />
and efficiency for<br />
your production<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is cutting-edge technology for users with the highest demands for production<br />
and process safety and for the storage of food. The pre-insulated piping system helps<br />
food and beverage manufacturers and processors to work at the highest level of safety and<br />
efficiency and to reduce costs.<br />
Industrial and commercial refrigeration involves much more<br />
than just regulated temperatures. The focus is on production<br />
and process safety as well as the preservation of stored food.<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is the perfect solution for food and beverage<br />
manufacturers and processors.<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is the pre-insulated piping system for secondary<br />
cooling with brine, glycol, ethanol, and chilled water. It is ideal<br />
for temperatures ranging from – 50 °C to 60 °C. <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
is cutting-edge technology that benefits fruit and vegetable<br />
processors, slaughterhouses, breweries, and supermarkets<br />
in particular. <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> helps you to work with maximum<br />
efficiency and without disruption, while simultaneously<br />
reducing your maintenance and operating costs.<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> has the advantages of all <strong>COOL</strong>-<strong>FIT</strong> products<br />
compared to traditional metal systems:<br />
• 100 % maintenance-free<br />
• 100 % reliable<br />
• 65 % less weight<br />
• 50 % faster installation<br />
• 30 % higher energy efficiency<br />
In addition, <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> offers further key benefits:<br />
Connected within just a few minutes<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> allows for the simplest, safest, and fastest<br />
possible installation – no unnecessary or complicated tasks.<br />
The system can be installed neatly and easily. Electrofusion<br />
permanently connects pipes, fittings, and valves in just a<br />
few minutes.<br />
5
<strong>COOL</strong>-<strong>FIT</strong> for<br />
the environment<br />
<strong>COOL</strong>-<strong>FIT</strong> helps you to work in a more environmentally<br />
friendly and energy-efficient manner.<br />
Compared to post-insulated metal systems, <strong>COOL</strong>-<strong>FIT</strong> is<br />
considerably more environmentally friendly and helps to<br />
work more energy-efficiently. For example: a cold store<br />
uses 1500 meters of piping to transport cold water for the<br />
cooling system. <strong>COOL</strong>-<strong>FIT</strong> releases about 100 tons carbon<br />
dioxide less than a metal system during production and<br />
operation. This saving is equivalent to a journey of<br />
446,000 kilometers by car.<br />
Outdoor installation<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> can also be installed outdoors without any<br />
problems. All surfaces are sealed, weatherproof, and<br />
UV-resistant. The sealing lip of the fittings surrounds the<br />
pipe and thus reliably protects the insulation from water and<br />
ice, ensuring a long service life.<br />
Constant quality control<br />
Thanks to the very few installation steps and the use of<br />
electrofusion as the jointing technology, <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
enables a degree of control that was previously impossible.<br />
Installation errors are largely excluded from the outset,<br />
which ensures a system of the highest possible quality.<br />
Clean and elegant system<br />
Installing <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is safe and clean: no crumbling<br />
insulating foam, no sticky insulating tape or filling material,<br />
no open flame for closing the seals. The result is also<br />
aesthetically appealing, which is important for accessible<br />
plants and customer visits.<br />
Carbon dioxide emission<br />
Energy loss<br />
[kW]<br />
140<br />
120<br />
100<br />
80<br />
60<br />
40<br />
20<br />
100 t<br />
CO 2<br />
saved<br />
0<br />
<strong>COOL</strong>-<strong>FIT</strong><br />
Copper<br />
Carbon steel<br />
Stainless steel<br />
Post-insulated with elastomer foam<br />
<strong>COOL</strong>-<strong>FIT</strong> is on average 30 percent more energy efficient<br />
than metal piping systems that were subsequently<br />
insulated with rubber-based foam, in an otherwise<br />
identical installation.<br />
6
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Leading technology<br />
for easy installation<br />
and longevity<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is the result of years of development by our engineers with the aim of making the<br />
system even easier and faster to install, yet at the same time, remaining as safe, reliable, and<br />
durable as you expect from all GF Piping Systems solutions. Many crucial details contribute to this.<br />
System properties<br />
Materials * Media pipe PE100<br />
Dimensions<br />
Jointing technology<br />
Insulation<br />
Outer jacket<br />
GF HE foam, halogen-free, closed-pore<br />
Pipe: HDPE (basic version), fitting: GF-HE<br />
d32 mm (DN25) – d450 mm (DN450)<br />
Electrofusion joint<br />
Pressure level d32 – d110 PN 16 bar, SDR 11<br />
d160 – d450 PN 10 bar, SDR 17<br />
Insulation Thermal conductivity λ at 20°C ≤ 0.022 W/mK (d32 – d110), ≤ 0.026 W/mK (d160 – d450)<br />
Density ≥ 70 kg/m 3<br />
Foam cell size<br />
Thickness (nominal value)<br />
max. ø 0.5 mm<br />
40 mm<br />
Temperature Medium – 50 °C to 60 °C (ambient – 30 °C to 60 °C)<br />
Weight Pipe d32 mm 1.41 kg/m<br />
(without liquid) Pipe d225 mm 16.6 kg/m<br />
Pipe d450 mm<br />
55.5 kg/m<br />
Environment Resistance Moisture- and vapor-proof<br />
Standards<br />
Ozone Depletion Potential (ODP)<br />
EN ISO 15494<br />
ISO 7<br />
* All three materials are permanently connected.<br />
EN ISO 16135, EN ISO 16138<br />
Zero<br />
Plastic piping systems for industrial<br />
applications – Metric series<br />
Fittings<br />
Industrial valves<br />
System components<br />
Pipes Fittings Transitions Valves Flexible hoses<br />
Tools<br />
7
PE100 media pipe<br />
40 mm foam insulation<br />
Angle marking<br />
Robust jacket<br />
Sealing lip<br />
Coupler<br />
Insulation plugs<br />
Electrofusion fitting<br />
Fire prevention classes <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> EN13501-1<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>F <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Mineralwool<br />
EN 13501-1 E B - s2, d0 A2 L<br />
Pressure / Temperature<br />
Medium: Water<br />
Minimum service life: 25 years<br />
T (°F)<br />
1<br />
Note: With a water/glycol mixture ≤ 50%, the<br />
reduction factor for the pressure/temperature<br />
diagram 1.1 for pipes and fittings, and<br />
1.7 for valves.<br />
P (bar)<br />
2<br />
P (psi)<br />
For PN16 or PN10 the safety factor is 1.25<br />
3 4<br />
P Operating pressure of the medium (bar, psi)<br />
T Temperature of the medium (°C, °F)<br />
C Safety factor<br />
8<br />
1<br />
2<br />
3<br />
4<br />
T (°C)<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> pipe and fitting d32/D90 – d110/D180, C=1.6, SDR11<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> pipe and fitting d160/D250 – d450/D630, C1.6, SDR17<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> ball valve PN10<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> butterfly valve PN10
Food and Beverage Production<br />
Reduced<br />
production<br />
costs<br />
During the manufacturing and processing of food<br />
and beverages, reliable cooling is essential for<br />
production that is both faultlessly hygienic and<br />
economically efficient. <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> eliminates<br />
the risk of downtimes caused by corrosion damage<br />
in the cooling system and helps to comply with<br />
increasing environmental regulations. <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
is ideal for conversion of secondary cooling systems<br />
and connection to existing systems.<br />
9
Easy transitions to metal systems<br />
The <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> adapter fittings enable simple and fast<br />
transition to metal systems, valves, end devices, and chillers,<br />
allowing for effortless connection of adjacent systems.<br />
Pre-insulated electrofusion fittings<br />
The range of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> fittings includes pre-insulated<br />
elbows, tees, couplers, and reducers. Electrofusion ensures<br />
secure joints within just a few minutes, with integrated<br />
quality control.<br />
GF Piping Systems<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Pre-insulated system<br />
for industrial and<br />
commercial refrigeration<br />
Increased efficiency and safety for food and beverage production<br />
and for the storage of food<br />
Certified fire protection collars<br />
Often, food and beverage production take places across<br />
several compact production areas. In the event of a fire, the<br />
fire protection collars reliably seal them off from each other<br />
for up to 120 minutes. Tested and certified by ROKU® System<br />
AWM II from ROLF KUHN GmbH, BIS PaciFyre® AMW II van<br />
Walraven (Approval: ETA 1710753) and with the Hilti<br />
Firestop collar<br />
Proven fixed point solutions<br />
The fixed point solutions from GF Piping Systems can be<br />
welded easily onto the outer jacket. They ensure professional,<br />
tension-free installation of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>, even under difficult<br />
fitting conditions.<br />
Your benefits<br />
• Highest degree of protection from production<br />
downtimes and loss of goods caused by<br />
corrosion damage<br />
• Ideal for conversion to secondary cooling<br />
to meet environmental regulations<br />
• Fast installation and commissioning with<br />
pre-insulation and electrofusion<br />
• Support throughout all project phases provided<br />
by local specialists from GF Piping Systems<br />
10
Cold Stores<br />
Safety<br />
throughout<br />
the cold<br />
chain<br />
In cold stores, the reliability of the system<br />
determines the preservation of the stock<br />
and thus the economic base of the company.<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>, as a high-quality plastic system,<br />
eliminates the risk of interruptions in the cold<br />
chain and product losses due to corrosion.<br />
The system can also be installed outdoors,<br />
if required. The outstanding insulation properties<br />
of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> make it possible to reduce<br />
cooling costs and to work more profitably.<br />
11
Pre-insulated pipes for fast installation<br />
In cold stores, long, straight pipe sections are common due<br />
to their often considerable size. The pre-insulation of<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> supports fast installation, with all pipes<br />
stripped at both ends at the factory.<br />
Uncomplicated flange connections<br />
Connection to existing metal systems is made straightforward<br />
with the use of flange connections. The <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> range<br />
includes the appropriate flange adaptor, which is precisely<br />
encased by the insulation shells.<br />
Pre-insulated butterfly valves<br />
In addition to ball valves, butterfly valves are among the most<br />
frequently used valves in cold stores. They are pre-insulated in<br />
the <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> system, just like all other system components.<br />
They are available from d110 to d225 as standard.<br />
Safe even when installed outdoors<br />
In order to use production areas efficiently, it is often<br />
necessary to relocate part of the installation outdoors, such<br />
as on the roof. No problem for <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>: the system is<br />
watertight, weatherproof, and resistant to UV radiation.<br />
Your benefits<br />
• Highest degree of protection against system<br />
failures by means of corrosion-free<br />
plastic components<br />
• Safe outdoor installation (e.g. on the roof)<br />
without any additional protective elements<br />
• Fast installation and commissioning with<br />
pre-insulation and electrofusion<br />
• Support throughout all project phases provided<br />
by local specialists from GF Piping Systems<br />
12
Breweries<br />
Corrosion-free<br />
production<br />
Corrosion resistance is particularly important<br />
in breweries, because to the constant use of<br />
water and liquid primary products. <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>,<br />
as a pre-insulated plastic system, is ideal for<br />
this use, especially for control and conditioning<br />
the fermentation. The installation in historical<br />
production buildings and irregularly shaped<br />
storage cellars can be challenging. Our local<br />
specialists are available to support you during<br />
each project phase.<br />
13
Electrical valves with pre-insulation<br />
In addition to butterfly valves, the <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> range<br />
includes ball valves, operated manually or electrically. They<br />
are pre-insulated, as is the entire system, and are therefore<br />
as quick and easy to install as all the other components.<br />
Flexible hoses for the tanks<br />
Fermentation tanks often have no clearly defined angles on<br />
their slightly irregular arched undersides, making it difficult<br />
to install normal fittings. Here, pre-insulated flexible hoses<br />
ensure a secure connection.<br />
Installation fittings for sensors<br />
Sensors for measuring pressure, temperature, and other<br />
variables can be easily integrated with installation fittings.<br />
The sensors are screwed in, drilling is not necessary. This<br />
method reduces the risk of leakage.<br />
Range of tools and training<br />
The tools from GF Piping Systems enable the installer to<br />
achieve a fast and high-quality installation of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>.<br />
Our local specialists also provide support with training<br />
sessions, if required.<br />
Your benefits<br />
• Cost reduction thanks to a corrosion-free,<br />
and thus maintenance-free, piping system<br />
• Flexibility during system planning thanks<br />
to a wide range of pre-insulated components<br />
• Fast installation and commissioning with<br />
pre-insulation and electrofusion<br />
• Support throughout all project phases provided<br />
by local specialists from GF Piping Systems<br />
14
Installation<br />
Joined in minutes by<br />
electrofusion<br />
The <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> pipes, fittings, and valves can be connected neatly, easily, and within just a few<br />
minutes by electrofusion. On this page you can find the most important processing steps and the<br />
technical differences among the dimension ranges d32 - d225 and d250 - d450.<br />
Diameter d32 - d225<br />
Features & Processing steps nominal<br />
• The pipes are already stripped and peeled on delivery<br />
• A sealing lip seals the insulations from each other<br />
• All fittings are available as an electrofusion version<br />
Clean the fusion zones of the fitting and pipe using a clean cloth.<br />
Place the mounting aid on the fitting. Stretch the sealing lip pressing the<br />
handles together.<br />
Slide the ends of the pipe into the fitting as far as the marking. Then remove<br />
the mounting aid.<br />
Connect the welding cables to the welding contacts of the fitting and weld according<br />
to the instruction manual.<br />
Here you can find the video tutorial for the installation<br />
gfps.com/cf4-installation-d225<br />
15
One of the most significant benefits of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is the clean,<br />
simple, and fast installation by electrofusion. Even plumbers<br />
without any training in welding find it easy to install <strong>COOL</strong>-<strong>FIT</strong><br />
<strong>4.0</strong> and check the quality of the installation.<br />
Diameter d250 - d450<br />
Features & Processing steps nominal<br />
• Pipes and fittings must be peeled before installation<br />
• Insulations are sealed from each other with a sealing tape<br />
and shrink sleeves<br />
• Spigot fitting (type B) connected with electrofusion coupler<br />
(type A)<br />
Peel the ends of the pipe and fitting type B and clean the fusion zones of the<br />
fitting and pipe using a clean cloth.<br />
Slide-on the shrink sleeves and push the pipe ends up to the stop into the<br />
electrofusion coupler.<br />
Connect the welding cables to the welding contacts of the fitting and weld<br />
according to the instruction manual.<br />
Seal the jointing face between the fitting and pipe with sealing tape and shrink<br />
the shrink sleeves.<br />
Here you can find the video tutorial for the installation<br />
gfps.com/cf4-installation-d450<br />
16
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Heat Tracing<br />
Frozen pipes can cause high costs. When water-filled <strong>COOL</strong>-<strong>FIT</strong> pipes are exposed to temperatures<br />
below zero °C without circulation and for extended periods of time, the water freezes and proper operation<br />
of the cooling system can no longer be maintained.<br />
The heat-tracing system for <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> offers an effective solution for the freeze protection of<br />
<strong>COOL</strong>-<strong>FIT</strong> lines. The self-regulating heating tape in combination with the insulation of the <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
pipe system prevents the cooling pipe from freezing..<br />
Function<br />
The <strong>COOL</strong>-<strong>FIT</strong> heat-tracing system uses a self-regulating heat-tracing cable installed inside the pipe. This efficiently protects<br />
the medium from freezing directly and without heat loss through the pipe wall insulation.<br />
The entry and exit of the cable into the <strong>COOL</strong>-<strong>FIT</strong> system is performed via cable glands, which are connected to the <strong>COOL</strong>-<strong>FIT</strong><br />
system via metallic thread transitions. The thermostat with surface sensor enables efficient control directly via the media temperature.<br />
The temperature sensor is installed via <strong>COOL</strong>-<strong>FIT</strong> installation fittings using a suitable immersion sleeve.<br />
With the <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> heat tracing, reliable frost protection down to -30°C ambient temperature is provided across all <strong>COOL</strong>-<br />
<strong>FIT</strong><strong>4.0</strong> dimensions from d32 - d450.<br />
Please contact GF if you need antifreeze protection at ambient temperatures below -30°C.<br />
Components<br />
1<br />
5<br />
6<br />
max. 60m<br />
5<br />
7<br />
7<br />
8<br />
8<br />
2<br />
3<br />
4<br />
9<br />
10<br />
9<br />
10<br />
11<br />
No. Designation No. Designation<br />
1 Thermostat 7 Cable glands 3/4“ male thread R<br />
2 Temperature sensor PT 100 8 Adaptor fitting d32-3/4“ female thread Rp<br />
3 Immersion sleeve for PT sensor 9 <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Reducer to d32<br />
4 <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Installation fitting 1/2“ Rp 10 <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> T90°<br />
5 Cold Lead connection and end seal kit 11 <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> pipe<br />
6 Heating Cable<br />
17
How can<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
help you?<br />
Support from GF specialists<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> is a technically superior system. And it is more<br />
than the sum of its components, because it is supplemented by<br />
service from GF Piping Systems in all phases of your project –<br />
starting from the planning stage, right through to commissioning.<br />
You can find our local specialists in 34 countries, meaning<br />
they are always close at hand. This also allows for personal<br />
discussions at your company, as well as at the construction site<br />
during the installation phase.<br />
With GF Piping Systems at your side, you can always count on<br />
having a competent contact person. This includes assistance<br />
with the necessary calculations, especially if you have little<br />
experience with plastic systems, as well as product selection,<br />
installation, and final quality inspection.<br />
Next steps<br />
• Consultation with your GF Piping Systems specialists<br />
• Consultation on the benefits of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> for you<br />
• Information on reference applications<br />
• Assistance with product selection and making calculations<br />
• Support throughout all project phases<br />
<strong>COOL</strong>ING Tool-Box<br />
The cooling calculation tool from GF Piping Systems<br />
supports the dimensioning and design of the secondary<br />
circuit. The cooling calculation tool includes the following<br />
calculation functions:<br />
• Expansion / contraction<br />
• Length of the flexible sections<br />
• Energy saving<br />
• Surface temperatures<br />
• Pipe dimensioning<br />
• Pressure losses<br />
• Dew point, including insulation strength<br />
• Bracket spacing<br />
• Freezing time<br />
• Weight comparison<br />
• CO 2<br />
footprint<br />
Use the online calculator<br />
gfps.com/cooling-tools<br />
Get in touch with us<br />
gfps.com/cf4-contact<br />
18
GF Piping Systems<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong><br />
Product range<br />
19
20
Table of contents<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> buizen 22<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> fittingen 23<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> overgangsfittingen 31<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Flexible Hoses 40<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> afsluiters 41<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> accessoires 44<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> heat tracing 51<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> gereedschap 53<br />
Index 56<br />
21
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> buizen<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Pipes<br />
PF 2 B3 A58 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Pipe, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11/17 metric<br />
• Insulation made from GF HE foam<br />
• Impact resistant. Color: black<br />
• Fire prevention class: E<br />
• Length: 5m<br />
• With free ends for electrofusion<br />
d/D<br />
(mm)<br />
DN<br />
(mm)<br />
SDR<br />
PN<br />
(bar)<br />
Code EUR / m Weight<br />
(kg ⁄ m)<br />
di<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
closest inch<br />
(inch)<br />
32/90 25 11 16 738 173 108 32.40 1.411 26.2 5000 36 1<br />
40/110 32 11 16 738 173 109 41.10 2.054 32.6 5000 40 1 1 ∕4<br />
50/110 40 11 16 738 173 110 46.80 2.221 40.8 5000 44 1 1 ∕2<br />
63/125 50 11 16 738 173 111 63.50 2.987 51.4 5000 48 2<br />
75/140 65 11 16 738 173 112 80.70 3.757 61.4 5000 55 2 1 ∕2<br />
90/160 80 11 16 738 173 113 100.20 4.819 73.6 5000 62 3<br />
110/180 100 11 16 738 173 114 123.00 6.200 90.0 5000 72 4<br />
160/250 150 17 10 738 173 117 201.10 9.921 141.0 5000 90 6<br />
225/315 200 17 10 738 173 120 309.50 16.620 198.2 5000 110 8<br />
PF 2 B3 A58 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Pipe, d250-d450<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• Fire prevention class: E<br />
• Length: 5.9m<br />
• With free ends for electrofusion<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR / m Weight<br />
(kg ⁄ m)<br />
di<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
closest inch<br />
(inch)<br />
250/355 10 738 173 021 466.50 18.180 220.4 5900 123 10<br />
280/400 10 738 173 022 590.90 22.640 246.8 5900 126 10<br />
315/450 10 738 173 023 709.10 28.510 277.6 5900 133 12<br />
355/500 10 738 173 024 869.60 35.350 312.8 5900 148 14<br />
400/560 10 738 173 125 1,043.50 4<strong>4.0</strong>70 352.6 5900 150 16<br />
450/630 10 738 173 126 1,303.50 55.490 396.6 5900 165 18<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>F Pipe - Fire retardant<br />
PF 2 B3 A58 003<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Fire retardant jacket. Color: black<br />
• Fire prevention class: b - s2, d0<br />
• Length: 5m<br />
• With free ends for electrofusion<br />
d/D<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
Code EUR / m<br />
di<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
closest inch<br />
(inch)<br />
160/250 150 10 738 173 317 231.20 141.0 5000 90 6<br />
225/315 200 10 738 173 320 397.30 198.2 5000 110 8<br />
22
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> fittingen<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> fittingen<br />
PF 2 B3 A59 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Coupler, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR 11 metric<br />
• Insulation made from GF HE foam<br />
• Impact resistant. Color: black<br />
• Integrated sealing lip, for a moisture-proof and vapour tight sealing<br />
d/D<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
32/90 25 16 738 913 108 58.90 0.089 97 127 36 5 1<br />
40/110 32 16 738 913 109 63.70 0.129 117 133 40 3 1 1 ∕4<br />
50/110 40 16 738 913 110 69.40 0.169 117 141 44 3 1 1 ∕2<br />
63/125 50 16 738 913 111 77.40 0.240 132 149 48 3 2<br />
75/140 65 16 738 913 112 85.80 0.520 147 163 55 3 2 1 ∕2<br />
90/160 80 16 738 913 113 100.60 0.750 168 178 62 4 3<br />
110/180 100 16 738 913 114 121.50 0.831 188 198 72 4 4<br />
160/250 150 16 738 913 117 162.70 1.726 258 233 90 3 6<br />
225/315 200 16 738 913 120 227.50 3.783 324 275 110 5 8<br />
PF 2 B3 A59 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Coupler, d250-d450<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L<br />
(mm)<br />
closest inch<br />
(inch)<br />
250/355 10 738 911 821 454.80 6.290 247 10<br />
280/400 10 738 911 822 569.20 8.020 252 10<br />
315/450 10 738 911 823 684.60 9.110 267 12<br />
355/500 10 738 911 824 824.20 13.780 290 14<br />
400/560 10 738 911 875 976.50 23.450 294 16<br />
450/630 10 738 911 876 1,180.90 22.590 326 18<br />
23
PF 2 B3 A59 002<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Elbow 90°, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11, metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• A: Electrofusion Fitting with integrated sealing lip, for a water and vapour tight sealing<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
Type<br />
32/90 16 738 103 108 81.10 0.255 97 81 36 20 1 A<br />
40/110 16 738 103 109 92.70 0.177 117 88 40 23 1 1 ∕4 A<br />
50/110 16 738 103 110 98.00 0.250 117 99 44 30 1 1 ∕2 A<br />
63/125 16 738 103 111 106.30 0.372 132 107 48 34 2 A<br />
75/140 16 738 103 112 135.60 0.800 147 120 55 40 2 1 ∕2 A<br />
90/160 16 738 103 113 175.90 1.500 168 150 62 63 3 A<br />
110/180 16 738 103 114 243.50 1.950 188 174 72 77 4 A<br />
160/250 16 738 103 117 439.30 5.200 258 220 90 105 6 A<br />
225/315 16 738 103 120 774.90 12.400 324 345 110 210 8 A<br />
PF 2 B3 A59 002<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Bend 90°, d250-d450<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• B: Spigot Fitting with free end (separate electrofusion fitting needed for joining)<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
Type<br />
250/355 10 738 003 121 1,754.20 11.800 123 375 10 B<br />
280/400 10 738 003 122 2,152.40 16.560 126 430 10 B<br />
315/450 10 738 003 123 2,563.20 28.800 133 470 12 B<br />
355/500 10 738 003 124 3,204.50 25.000 148 900 14 B<br />
400/560 10 738 003 175 3,947.00 59.640 150 980 16 B<br />
450/630 10 738 003 176 5,128.80 79.200 165 1070 18 B<br />
24
PF 2 B3 A59 002<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Elbow 45°, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11, metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• A: Electrofusion Fitting with integrated sealing lip, for a water and vapour tight sealing<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
Type<br />
32/90 16 738 153 108 80.10 0.108 97 72 36 11 1 A<br />
40/110 16 738 153 109 94.90 0.162 117 76 40 11 1 1 ∕4 A<br />
50/110 16 738 153 110 100.50 0.218 117 82 44 13 1 1 ∕2 A<br />
63/125 16 738 153 111 107.10 0.315 132 89 48 16 2 A<br />
75/140 16 738 153 112 126.20 0.650 147 98 55 18 2 1 ∕2 A<br />
90/160 16 738 153 113 171.80 1.030 168 117 62 30 3 A<br />
110/180 16 738 153 114 239.70 1.270 188 138 72 41 4 A<br />
160/250 16 738 153 117 410.00 4.100 258 161 90 46 6 A<br />
225/315 16 738 153 120 704.50 17.603 324 278 110 143 8 A<br />
PF 2 B3 A59 002<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Bend 45°, d250-d450<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• B: Spigot Fitting with free end (separate electrofusion fitting needed for joining)<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
Type<br />
250/355 10 738 053 121 1,616.70 12.840 123 440 10 B<br />
280/400 10 738 053 122 1,978.90 18.000 126 460 10 B<br />
315/450 10 738 053 123 2,363.90 21.360 133 535 12 B<br />
355/500 10 738 053 124 2,842.00 18.720 148 620 14 B<br />
400/560 10 738 053 175 3,679.10 43.920 150 650 16 B<br />
450/630 10 738 053 176 4,908.80 54.360 165 680 18 B<br />
25
PF 2 B3 A59 003<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> T90° equal, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11, metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• A: Electrofusion Fitting with integrated sealing lip, for a water and vapour tight sealing<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
32/90 16 738 203 108 87.70 0.161<br />
40/110 16 738 203 109 115.30 0.257<br />
50/110 16 738 203 110 126.00 0.342<br />
63/125 16 738 203 111 155.40 0.514<br />
75/140 16 738 203 112 180.90 1.000<br />
90/160 16 738 203 113 236.50 1.400<br />
110/180 16 738 203 114 29<strong>4.0</strong>0 2.500<br />
160/250 16 738 203 117 615.10 5.600<br />
225/315 16 738 203 120 1,130.40 16.748<br />
d/D<br />
(mm)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
closest inch<br />
(inch)<br />
Type<br />
32/90 97 79 36 18 118 1 A<br />
40/110 117 87 40 22 132 1 1 ∕4 A<br />
50/110 117 94 44 25 138 1 1 ∕2 A<br />
63/125 132 103 48 30 154 2 A<br />
75/140 147 116 55 36 168 2 1 ∕2 A<br />
90/160 1668 130 62 43 187 3 A<br />
110/180 188 154 72 57 207 4 A<br />
160/250 258 192 90 77 263 6 A<br />
225/315 324 355 110 220 337 8 A<br />
26
PF 2 B3 A59 003<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> T90° equal, d250-d450<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• B: Spigot Fitting with free end (separate electrofusion fitting needed for joining)<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
closest inch<br />
(inch)<br />
Type<br />
250/355 10 738 203 121 2,390.60 12.000 123 500 500 10 B<br />
280/400 10 738 203 122 2,888.30 22.300 126 500 500 10 B<br />
315/450 10 738 203 123 3,429.20 21.480 133 500 500 12 B<br />
355/500 10 738 203 124 4,369.90 30.600 148 650 700 14 B<br />
400/560 10 738 203 175 5,506.10 42.000 150 650 700 16 B<br />
450/630 10 738 203 176 9,364.20 67.200 165 700 750 18 B<br />
PF 2 B3 A59 004<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> T90° reduced, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11, metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• A: Electrofusion Fitting with integrated sealing lip, for a water and vapour tight sealing<br />
d/D<br />
(mm)<br />
d1/D1<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
75/140 63/125 16 738 203 218 327.90 0.863<br />
90/160 63/125 16 738 203 222 364.20 1.232<br />
90/160 75/140 16 738 203 223 364.20 1.293<br />
110/180 63/125 16 738 203 227 594.60 1.972<br />
110/180 75/140 16 738 203 228 594.60 1.949<br />
110/180 90/160 16 738 203 229 594.60 2.037<br />
160/250 63/125 16 738 203 247 752.10 5.150<br />
160/250 90/160 16 738 203 249 752.10 5.147<br />
160/250 110/180 16 738 203 250 752.10 5.220<br />
160/250 140/200 16 738 204 251 940.00 5.540<br />
225/315 63/125 16 738 203 264 963.50 16.832<br />
225/315 90/160 16 738 203 266 963.50 16.889<br />
225/315 110/180 16 738 203 267 963.50 16.805<br />
225/315 140/200 16 738 204 268 1,204.40 17.100<br />
225/315 160/250 16 738 203 269 963.50 18.500<br />
table continued on the next page<br />
27
PF 2 B3 A59 004<br />
d/D<br />
(mm)<br />
d1/D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
Closest inch<br />
(inch)<br />
Type<br />
75/140 63/125 147 116 55 48 36 228 2 1 ∕2 A<br />
90/160 63/125 168 130 62 48 43 253 3 - 2 A<br />
90/160 75/140 168 130 62 55 43 252 3 - 2 1 ∕2 A<br />
110/180 63/125 188 154 72 48 57 267 4 - 2 A<br />
110/180 75/140 188 154 72 55 57 268 4 - 2 1 ∕2 A<br />
110/180 90/160 188 154 72 62 57 268 4 - 3 A<br />
160/250 63/125 258 192 90 48 77 327 6 - 2 A<br />
160/250 90/160 258 192 90 62 77 327 6 - 3 A<br />
160/250 110/180 258 192 90 72 77 325 6 - 5 A<br />
160/250 140/200 258 192 90 84 77 340 6 - 5 A<br />
225/315 63/125 324 355 110 48 220 412 8 - 2 A<br />
225/315 90/160 324 355 110 62 220 412 8 - 3 A<br />
225/315 110/180 324 355 110 72 220 412 8 - 4 A<br />
225/315 140/200 324 335 110 84 220 412 8 - 5 A<br />
225/315 160/250 324 355 110 90 220 396 8 - 6 A<br />
PF 2 B3 A59 005<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Reducer, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11, metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• A: Electrofusion Fitting with integrated sealing lip, for a water and vapour tight sealing<br />
• B: Spigot Fitting with free end<br />
d/D<br />
(mm)<br />
d1/D1<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
40/110 32/90 16 738 903 206 59.50 0.250<br />
50/110 32/90 16 738 903 209 72.20 0.280<br />
50/110 40/110 16 738 903 210 72.20 0.320<br />
63/125 32/90 16 738 903 212 92.30 0.217<br />
63/125 40/110 16 738 903 213 92.30 0.232<br />
63/125 50/110 16 738 903 214 92.30 0.243<br />
75/140 63/125 16 738 903 318 103.70 0.264<br />
90/160 63/125 16 738 903 322 120.40 0.387<br />
90/160 75/140 16 738 903 323 120.40 0.416<br />
110/180 63/125 16 738 903 327 191.20 0.566<br />
110/180 75/140 16 738 903 328 191.20 0.577<br />
110/180 90/160 16 738 903 329 191.20 0.644<br />
160/250 63/125 16 738 903 347 316.00 1.298<br />
160/250 90/160 16 738 903 349 316.00 1.323<br />
160/250 110/180 16 738 903 350 316.00 1.362<br />
160/250 140/200 16 738 904 351 316.00 1.664<br />
225/315 63/125 16 738 903 364 471.00 2.960<br />
225/315 90/160 16 738 903 366 471.00 3.018<br />
225/315 110/180 16 738 903 367 471.00 3.079<br />
225/315 140/200 16 738 904 368 471.00 3.172<br />
225/315 160/250 16 738 903 369 471.00 3.550<br />
d/D<br />
(mm)<br />
d1/D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z<br />
(mm)<br />
Closest inch<br />
(inch)<br />
Type<br />
40/110 32/90 117 143 40 36 17 1 1 ∕4 - 1 A<br />
50/110 32/90 117 151 44 36 21 1 1 ∕2 - 1 A<br />
50/110 40/110 117 149 44 40 15 1 1 ∕2 - 1 1 ∕4 A<br />
63/125 32/90 132 160 48 36 26 2 - 1 A<br />
63/125 40/110 132 159 48 40 21 2 - 1 1 ∕4 A<br />
63/125 50/110 132 159 48 44 17 2 - 1 1 ∕2 A<br />
75/140 63/125 55 48 170 2 1 ∕2 - 2 B<br />
90/160 63/125 62 48 190 3 - 2 B<br />
90/160 75/140 62 55 189 3 - 2 1 ∕2 B<br />
110/180 63/125 72 48 204 4 - 2 B<br />
28<br />
table continued on the next page
PF 2 B3 A59 005<br />
d/D<br />
(mm)<br />
d1/D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z<br />
(mm)<br />
Closest inch<br />
(inch)<br />
Type<br />
110/180 75/140 72 55 205 4 - 2 1 ∕2 B<br />
110/180 90/160 72 62 205 4 - 3 B<br />
160/250 63/125 90 48 244 6 - 2 B<br />
160/250 90/160 90 62 244 6 - 3 B<br />
160/250 110/180 90 72 242 6 - 4 B<br />
160/250 140/200 90 84 257 6 - 5 B<br />
225/315 63/125 110 48 295 8 - 2 B<br />
225/315 90/160 110 62 295 8 - 3 B<br />
225/315 110/180 110 72 295 8 - 4 B<br />
225/315 140/200 110 84 296 8 - 5 B<br />
225/315 160/250 110 90 279 8 - 6 B<br />
PF 2 B3 A59 005<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Reducer, d250-d450<br />
Model:<br />
• Pre-insulated PE100 SDR 17 metric<br />
• Insulation made from GF HE foam<br />
• Outer jacket impact resistant. Color: black<br />
• B: Spigot Fitting with free end (separate electrofusion fitting needed for joining)<br />
d/D<br />
(mm)<br />
d1/D1<br />
(mm)<br />
PN Code EUR Weight<br />
(kg)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
Type<br />
250/355 225/315 PN 10 738 903 825 1,231.80 2.800 123 110 332 B<br />
280/400 225/315 PN 10 738 903 829 1,378.10 4.700 126 110 335 B<br />
280/400 250/355 PN 10 738 903 830 1,378.10 5.100 133 110 365 B<br />
315/450 225/315 PN 10 738 903 836 1,508.00 7.100 126 110 340 B<br />
315/450 250/355 PN 10 738 903 837 1,508.00 7.400 133 123 365 B<br />
315/450 280/400 PN 10 738 903 838 1,508.00 6.800 133 126 365 B<br />
355/500 250/355 PN 10 738 903 844 2,041.70 8.200 148 123 390 B<br />
355/500 280/400 PN 10 738 903 845 2,041.70 7.700 148 126 390 B<br />
355/500 315/450 PN 10 738 903 846 2,041.70 8.300 148 133 390 B<br />
400/560 280/400 PN 10 738 903 853 2,622.50 9.100 150 126 415 B<br />
400/560 315/450 PN 10 738 903 854 2,622.50 11.400 150 133 420 B<br />
400/560 355/500 PN 10 738 903 855 2,622.50 11.000 150 148 405 B<br />
450/630 280/400 PN 10 738 903 862 3,55<strong>4.0</strong>0 13.200 165 126 390 B<br />
450/630 315/450 PN 10 738 903 863 3,55<strong>4.0</strong>0 13.600 165 133 390 B<br />
450/630 355/500 PN 10 738 903 864 3,55<strong>4.0</strong>0 13.700 165 148 393 B<br />
450/630 400/560 PN 10 738 903 865 3,55<strong>4.0</strong>0 14.800 165 150 395 B<br />
29
PF 2 B3 A59 006<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Installation fitting type 313, d32-d225<br />
Model:<br />
• Pre-insulated, PE100, SDR11, metric<br />
• Insulation made from GF HE foam<br />
• Impact resistant. Color: black<br />
• With threaded branch for sensors (i.e temperature, pressure)<br />
• A: Electrofusion Fitting with integrated sealing lip, for a water and vapour tight sealing<br />
• B: Spigot Fitting with free end<br />
d/D<br />
(mm)<br />
Rp<br />
(inch)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
H<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
Type<br />
32/90 1<br />
∕2 16 738 313 608 257.00 0.169 95 79 36 18 A<br />
40/110 1<br />
∕2 16 738 313 609 269.50 0.267 105 87 40 22 A<br />
40/110 3<br />
∕4 16 738 313 659 269.50 0.269 108 87 40 22 A<br />
50/110 1<br />
∕2 16 738 313 610 286.00 0.354 107 94 44 25 A<br />
50/110 3<br />
∕4 16 738 313 660 286.00 0.356 110 94 44 25 A<br />
63/125 1<br />
∕2 16 738 313 611 312.70 0.537 120 103 48 30 A<br />
63/125 3<br />
∕4 16 738 313 661 312.70 0.539 123 103 48 30 A<br />
75/140 1<br />
∕2 16 738 313 612 353.20 0.773 127 116 55 36 A<br />
75/140 3<br />
∕4 16 738 313 662 353.20 0.774 130 116 55 36 A<br />
90/160 1<br />
∕2 16 738 313 613 410.20 1.164 139 130 62 43 A<br />
90/160 3<br />
∕4 16 738 313 663 410.20 1.165 142 130 62 43 A<br />
110/180 1<br />
∕2 16 738 313 614 461.40 1.944 151 154 72 57 A<br />
110/180 3<br />
∕4 16 738 313 664 461.40 1.944 154 154 72 57 A<br />
160/250 1<br />
∕2 16 738 313 617 470.40 2.496 134 165 90 330 B<br />
160/250 3<br />
∕4 16 738 313 667 471.20 2.489 134 165 90 330 B<br />
225/315 1<br />
∕2 16 738 313 620 578.60 5.155 166 185 110 370 B<br />
225/315 3<br />
∕4 16 738 313 670 579.30 5.146 169 185 110 370 B<br />
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Barrel nipple with insulation, d32-d225<br />
Model:<br />
• Pre-insulated PE100 SDR11/17 metric<br />
• Insulation made from GF HE foam<br />
• Impact resistant. Color: black<br />
• For short connections between <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fittings Typ A<br />
d/D<br />
(mm)<br />
PN<br />
(bar)<br />
SDR Code EUR Weight<br />
(kg)<br />
L1<br />
(mm)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
32/90 16 11 738 913 408 60.10 0.126 36 151 1<br />
40/110 16 11 738 913 409 69.60 0.188 40 155 1 1 ∕4<br />
50/110 16 11 738 913 410 76.80 0.226 44 163 1 1 ∕2<br />
63/125 16 11 738 913 411 90.50 0.328 48 171 2<br />
75/140 16 11 738 913 412 114.40 0.447 55 185 2 1 ∕2<br />
90/160 16 11 738 913 413 137.20 0.631 62 199 3<br />
110/180 16 11 738 913 414 165.70 0.929 72 219 4<br />
160/250 10 17 738 913 417 198.80 1.576 90 255 6<br />
225/315 10 17 738 913 420 255.10 3.254 110 295 8<br />
30
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> overgangsfittingen<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> overgangsfittingen<br />
PF 2 B3 A59 010<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Adaptor fitting PE/stainless steel with loose union nut G<br />
Model:<br />
• Spigot fitting PE100 SDR11, metric with free end<br />
• Stainless steel 1.4404 / 316L with female thread G<br />
• Including flat seal EPDM<br />
• Including insulation half shells<br />
d<br />
(mm)<br />
G<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z<br />
(mm)<br />
32 1/2" 16 738 943 308 114.50 0.250 104 133 36 101 126<br />
32 3/4" 16 738 943 318 118.60 0.264 104 135 36 101 129<br />
32 1" 16 738 943 328 123.70 0.296 104 135 36 101 129<br />
40 1 1/4" 16 738 943 309 169.90 0.595 128 155 40 91 148<br />
40 1 1/2" 16 738 943 319 206.80 0.655 128 157 40 91 148<br />
50 1 1/2" 16 738 943 310 225.50 0.820 138 164 44 96 154<br />
63 2" 16 738 943 311 317.50 1.307 149 186 48 103 170<br />
PF 2 B3 A59 011<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Union PE/PE<br />
Model:<br />
• Union bush: Spigot fitting PE100 SDR11, metric with free end<br />
• Union End: Spigot fitting PE100 SDR11, metric with free end<br />
• Gasket: O-ring EPDM Nr. 748 410 008-014<br />
• Union Nut: PEGF25<br />
• Including insulation half shells<br />
d<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
32 16 738 513 608 149.80 0.223 139 90 211 36 139 107 104<br />
40 16 738 513 609 178.10 0.363 153 110 234 40 158 118 116<br />
50 16 738 513 610 201.20 0.468 165 110 247 44 163 124 123<br />
63 16 738 513 611 259.30 0.584 185 125 268 48 176 136 132<br />
31
PF 2 B3 A59 011<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Adaptor Union PE/ABS<br />
Model:<br />
• Union bush: ABS Solvent cement socket<br />
• Union End: Spigot fitting PE100 SDR11, metric with free end<br />
• Gasket: O-ring EPDM Nr. 748 410 008-014<br />
• Union Nut: ABS<br />
• Including insulation half shells<br />
d<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
L3<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
32 10 738 513 708 96.90 0.169 134 90 137 36 33 109 104 11<br />
40 10 738 513 709 117.30 0.256 143 110 156 40 39 126 117 13<br />
50 10 738 513 710 140.60 0.334 154 110 169 44 46 135 123 15<br />
63 10 738 513 711 203.60 0.522 172 125 190 48 58 152 132 21<br />
75 10 738 513 712 314.10 0.996 210 140 211 55 62 170 149 18<br />
90 10 738 513 713 424.10 1.336 233 160 215 62 69 167 146 18<br />
110 10 738 513 714 503.00 1.900 263 180 235 72 72 177 163 11<br />
PF 2 B3 A59 011<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Adaptor fitting PE/i<strong>FIT</strong><br />
Model:<br />
• Spigot fitting PE100 SDR11, metric with free end<br />
• i<strong>FIT</strong> module stainless steel 1.4404 / 316L<br />
• Including insulation half shells<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
32 25-32 16 738 943 108 225.90 0.256 103 90 132 36 80<br />
32
PF 2 B3 A59 011<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Adaptor fitting PE/Sanipex MT<br />
Model:<br />
• Spigot fitting PE100 SDR11, metric with free end<br />
• Sanipex MT adaptor brass CuZn40Pb2<br />
• Including insulation half shells<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
PN<br />
(bar)<br />
Code<br />
EUR Weight<br />
(kg)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z<br />
(mm)<br />
32 32 10 738 953 118 180.90 0.476 104 90 174 36 101 135<br />
PF 2 B3 A59 012<br />
<strong>COOL</strong>-<strong>FIT</strong> 2.0/<strong>4.0</strong> Flange adaptor<br />
Model:<br />
• PE100 SDR11, metric<br />
• Suitable for flange connections to metric (from d110 also to ANSI/ASME B16.5)<br />
• Gasket: Profile flange gasket NBR No. 45 44 07, EPDM No. 48 44 07<br />
• Type 1 without chamfer, Type 2 with chamfer<br />
• Separate Fittings type A needed for joining<br />
Note:<br />
Backing ring and gasket not included<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN Code EUR Weight<br />
(kg)<br />
32 25 16 738 710 008 102.60 0.051<br />
40 32 16 738 710 009 115.80 0.075<br />
50 40 16 738 710 010 125.40 0.900<br />
63 50 16 738 710 011 138.80 0.173<br />
75 65 16 738 710 012 160.60 1.210<br />
90 80 16 738 710 013 176.30 1.193<br />
110 100 16 738 710 014 245.00 1.574<br />
140 125 16 738 710 016 339.90 2.412<br />
160 150 16 738 710 017 466.90 1.748<br />
225 200 16 738 710 020 677.80 10.440<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
L3<br />
(mm)<br />
z<br />
(mm)<br />
d1<br />
(mm)<br />
d2<br />
(mm)<br />
d3<br />
(mm)<br />
d4<br />
(mm)<br />
d5<br />
(mm)<br />
Type<br />
32 25 135 90 75 162 36 10 26 190 40 68 26 121 1<br />
40 32 170 110 90 165 40 11 28 197 50 78 32 146 1<br />
50 40 180 110 90 178 44 12 30 214 61 88 40 156 1<br />
63 50 200 125 110 230 48 14 32 270 75 102 51 171 1<br />
75 65 220 140 125 232 55 16 34 279 89 122 61 191 2<br />
90 80 240 160 140 245 62 17 35 299 105 138 78 73 206 2<br />
table continued on the next page<br />
33
PF 2 B3 A59 012<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
L3<br />
(mm)<br />
z<br />
(mm)<br />
d1<br />
(mm)<br />
d2<br />
(mm)<br />
d3<br />
(mm)<br />
d4<br />
(mm)<br />
d5<br />
(mm)<br />
Type<br />
110 100 270 180 160 254 72 18 36 320 125 158 100 90 235 2<br />
140 125 300 225 200 299 84 25 38 383 155 188 127 127 256 2<br />
160 150 358 259 332 90 25 34 412 174 213 151 131 295 2<br />
225 200 423 325 383 110 32 37 483 233 268 209 184 354 2<br />
34
Flange adaptor PE100 SDR17/17.6<br />
Combined jointing face: flat and serrated<br />
Model:<br />
• Long spigot<br />
• Material: PE100<br />
• For IR, butt- and electro fusion<br />
• Suitable for flange connections to metric (from d110 also to ANSI/ASME B16.5)<br />
• Gasket d20-d630: Profile flange gasket NBR No. 45 44 07, EPDM No. 48 44 07<br />
• Gasket d710-d1000: flat gasket EPDM No. 48 40 03<br />
• Type A without chamfer, Type B with chamfer<br />
• 5 bar Gas / 10 bar Water<br />
• Up to d315, suitable for butterfly valve type 567/578 Above use PE100 Adaptor for butterfly<br />
valves SDR17/17.6 (d355-d1200)<br />
• Up to d280, suitable for butterfly valve type Type 037/038/039<br />
• Up to d280, suitable for butterfly valve type 037/038/039 Above use PE100 Adaptor for butterfly<br />
valves SDR11 (d315-d800)<br />
• Gasket: Profile flange gasket NBR No. 45 44 07, EPDM No. 48 44 07<br />
• Up to d315, suitable for butterfly valve type 567/578<br />
• For butt-, IR Plus® and electrofusion<br />
• Up to d400, suitable for butterfly valve type 567/578. Above use eco<strong>FIT</strong> adaptor for butterfly<br />
valves SDR17.6 (d450-d1200)<br />
• 10 bar Gas / 16 bar Water<br />
* Type B with chamfer<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
FM Code EUR PF Weight<br />
(kg)<br />
250 250 753 800 096 116.80 2 51 301 002 3.500<br />
280 250 753 800 097 177.30 2 51 301 002 3.780<br />
315 300 753 800 098 233.60 2 51 301 002 5.470<br />
* 355 350 753 800 299 371.70 2 51 301 008 7.100<br />
* 400 400 753 800 300 557.60 2 51 301 008 9.600<br />
* 450 500 753 800 301 1,459.30 2 51 301 008 16.400<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
d2<br />
(mm)<br />
d3<br />
(mm)<br />
d4<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
e<br />
(mm)<br />
Type a°<br />
250 285 320 245 220 220 148 35 14.8 B 25<br />
280 291 320 265 246 230 154 35 16.6 B 30<br />
315 335 370 300 277 242 166 36 18.7 B 30<br />
* 355 373 430 346 310 260 170 33 21.1 B 21<br />
* 400 427 482 395 350 282 185 36 23.7 B 21<br />
* 450 514 585 400 316 205 46 26.7 A<br />
35
Backing flange PP-V metric<br />
For butt fusion systems metric<br />
Model:<br />
• Full-plastic flange PP-GF (30 % glass-fibre reinforced)<br />
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501<br />
• Bolt circle PN 10<br />
AL: number of holes<br />
1 ) Suitable for socket- and butt fusion systems<br />
2 ) Combined version, metric-ANSI<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
Code EUR PF SP Weight<br />
(kg)<br />
1 32 25 16 727 700 408 10.90 2 34 238 030 80 0.151<br />
1 40 32 16 727 700 409 13.00 2 34 238 030 40 0.244<br />
1 50 40 16 727 700 410 15.50 2 34 238 030 30 0.297<br />
1 63 50 16 727 700 411 19.40 2 34 238 030 25 0.362<br />
1 75 65 16 727 700 412 21.60 2 34 238 030 19 0.487<br />
90 80 16 727 700 513 25.90 2 34 238 031 15 0.544<br />
110 100 16 727 700 514 31.60 2 34 238 031 13 0.643<br />
140 125 16 727 700 516 44.30 2 34 238 031 10 0.842<br />
2 160 150 16 727 700 517 54.80 2 34 238 031 0 1.200<br />
2 225 200 16 727 700 520 79.50 2 34 238 031 0 1.400<br />
D3<br />
(mm)<br />
D2<br />
(mm)<br />
SC<br />
H<br />
(mm)<br />
H max.<br />
(mm)<br />
D<br />
(mm)<br />
AL<br />
D1<br />
(mm)<br />
1 14 42 M12 18 18 115 4 85<br />
1 18 51 M16 20 20 140 4 100<br />
1 18 62 M16 22 22 150 4 110<br />
1 18 78 M16 24 24 165 4 125<br />
1 18 92 M16 26 26 185 4 145<br />
18 108 M16 27 27 200 8 160<br />
18 128 M16 28 28 220 8 180<br />
18 158 M16 30 30 250 8 210<br />
2 22 178 M20 32 32 285 8 240<br />
2 22 238 M20 34 34 340 8 295<br />
Backing flange PP-Steel metric<br />
For butt fusion systems metric<br />
Model:<br />
• Material: PP (30% glass-fibre reinforced) with steel ring<br />
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501<br />
• Bolt circle PN 10<br />
AL: number of holes<br />
1 ) Suitable for socket -and butt fusion systems<br />
2 ) Combined version, bolt circle metric - ANSI<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
Code EUR PF Weight<br />
(kg)<br />
1 32 25 16 727 700 208 14.60 2 34 238 020 0.429<br />
1 40 32 16 727 700 209 17.30 2 34 238 020 0.621<br />
1 50 40 16 727 700 210 20.60 2 34 238 020 0.722<br />
1 63 50 16 727 700 211 26.00 2 34 238 020 0.900<br />
1 75 65 16 727 700 212 28.70 2 34 238 020 1.110<br />
90 80 16 727 700 313 34.20 2 34 238 022 1.390<br />
110 100 16 727 700 314 42.40 2 34 238 022 1.407<br />
140 125 16 727 700 716 59.20 2 34 238 022 2.318<br />
2 160 150 16 727 700 717 72.90 2 34 238 022 3.491<br />
2 225 200 16 727 700 720 105.70 2 34 238 022 5.533<br />
250 250 16 727 700 721 134.10 2 34 238 022 6.632<br />
36<br />
table continued on the next page
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
Code EUR PF Weight<br />
(kg)<br />
280 250 16 727 700 722 134.10 2 34 238 022 6.573<br />
315 300 16 727 700 723 196.00 2 34 238 022 7.903<br />
355 350 16 727 700 724 388.90 2 34 238 022 14.587<br />
400 400 16 727 700 725 442.60 2 34 238 022 20.034<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
D3<br />
(mm)<br />
H max.<br />
(mm)<br />
H<br />
(mm)<br />
1 32 115 85 42 14 16 16 4 M12<br />
1 40 140 100 51 18 16 16 4 M16<br />
1 50 150 110 62 18 20 20 4 M16<br />
1 63 165 125 78 18 20 20 4 M16<br />
1 75 185 145 92 18 20 20 4 M16<br />
90 200 160 108 18 20 20 8 M16<br />
110 220 180 128 18 20 20 8 M16<br />
140 250 210 158 18 26 26 8 M16<br />
2 160 285 241 178 22 26 26 8 M20<br />
2 225 340 297 238 22 29 29 8 M20<br />
250 395 350 288 22 32 32 12 M20<br />
280 395 350 294 22 32 32 12 M20<br />
315 445 400 338 22 36 36 12 M20<br />
355 515 460 376 23 42 42 16 M20<br />
400 574 515 430 26 42 42 16 M24<br />
AL<br />
SC<br />
Profiled backing flange PP-Steel metric<br />
For butt fusion systems metric<br />
Model:<br />
• PP with glass-fibre reinforcement and GGG 50 insert<br />
• Connecting dimensions: ISO 7005, EN 1092, DIN 2501<br />
• Bolt circle PN 10<br />
Note:<br />
flat side = bolt side profiled side = flange adaptor side<br />
AL: number of holes<br />
* Galvanized steel S235-JR, suitable for underground laying<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
Code EUR PF SP Weight<br />
(kg)<br />
* 450 450 10 724 705 026 1,222.60 2 55 337 001 1 38.000<br />
450 500 10 724 700 426 1,255.20 2 55 337 003 1 25.600<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
D3<br />
(mm)<br />
H<br />
(mm)<br />
* 450 450 615 565 470 26 36 20 M24<br />
450 500 685 620 517 26 56 20 M24<br />
AL<br />
SC<br />
37
PF 2 34 238 038<br />
Blanking flange set PE<br />
Combined jointing face flat and serrated metric<br />
Model:<br />
• d63 - d315: backing flange PP-V with end blank PE<br />
• d355 - d630: backing flange PP/Steel with end blank PE<br />
• Connecting dimensions: ISO 7005, EN 1092, DIN 2501<br />
• Bolt circle PN 10<br />
AL: number of holes<br />
L: length of the End Blank<br />
DN<br />
(mm)<br />
d<br />
(mm)<br />
PN<br />
(bar)<br />
Code EUR SP Weight<br />
(kg)<br />
50 63 16 753 700 611 144.20 1 0.560<br />
65 75 16 753 700 612 154.20 1 0.910<br />
80 90 16 753 700 613 176.20 1 0.921<br />
100 110 16 753 700 614 193.70 1 1.158<br />
100 125 16 753 700 615 193.70 1 1.678<br />
125 140 16 753 700 616 275.20 1 1.913<br />
150 160 16 753 700 617 363.20 1 2.373<br />
200 225 16 753 700 620 563.50 1 3.744<br />
250 250 16 753 700 621 620.00 1 6.051<br />
250 280 16 753 700 622 792.00 1 6.305<br />
300 315 16 753 700 623 1,330.30 1 8.894<br />
350 355 16 753 700 624 2,154.60 1 23.198<br />
400 400 16 753 700 625 2,462.70 1 30.766<br />
500 450 10 753 700 626 4,405.60 1 44.271<br />
D1<br />
(mm)<br />
L<br />
(mm)<br />
D4<br />
(mm)<br />
D2<br />
(mm)<br />
D3<br />
(mm)<br />
H<br />
(mm)<br />
D<br />
(mm)<br />
AL<br />
L1<br />
(mm)<br />
125 30 102 165 18 24 75 4 14 M16<br />
145 30 122 185 18 26 89 4 16 M16<br />
160 30 138 200 18 27 105 8 17 M16<br />
180 30 158 220 18 28 125 8 18 M16<br />
180 35 158 220 18 28 132 8 25 M16<br />
210 40 188 250 18 30 155 8 25 M16<br />
240 40 212 285 22 32 175 8 25 M20<br />
295 50 268 340 22 34 235 8 32 M20<br />
350 55 320 395 22 38 285 12 35 M20<br />
350 60 320 395 22 38 291 12 35 M20<br />
400 65 370 445 22 42 335 12 35 M20<br />
460 70 430 515 22 40 373 16 40 M20<br />
515 75 482 574 26 40 427 16 46 M24<br />
620 80 585 684 26 49 510 20 60 M24<br />
SC<br />
Profile Flange Gasket, metric<br />
EPDM / FKM<br />
Model:<br />
• For all metric GF Flange Adaptors<br />
• Hardness: 70° Shore EPDM, 75° Shore FKM<br />
• EPDM: approved acc. to DVGW Water W 270, KTW recommendation<br />
• Centering on the inner diameter of the screw crown<br />
• material steel insert: carbon steel<br />
• Rubber-steel body combined with rubber profile cord ring<br />
di FA are the suitable inner diameters of flanges adaptors<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
EPDM<br />
Code<br />
EUR PF D<br />
(mm)<br />
H<br />
(mm)<br />
di FA<br />
(mm)<br />
H1<br />
(mm)<br />
D1<br />
(mm)<br />
32 25 16 748 440 708 19.50 2 30 162 037 71 4 18 ‐ 28 3 28<br />
40 32 16 748 440 709 20.20 2 30 162 037 82 4 30 ‐ 40 3 40<br />
50 40 16 748 440 710 20.90 2 30 162 037 92 4 36 ‐ 46 3 46<br />
63 50 16 748 440 711 21.60 2 30 162 037 107 5 48 ‐ 58 4 58<br />
75 65 16 748 440 712 22.10 2 30 162 037 127 5 59 ‐ 69 4 69<br />
38<br />
table continued on the next page
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
EPDM<br />
Code<br />
EUR PF D<br />
(mm)<br />
H<br />
(mm)<br />
di FA<br />
(mm)<br />
H1<br />
(mm)<br />
D1<br />
(mm)<br />
90 80 16 748 440 713 23.20 2 30 162 037 142 5 73 ‐ 84 4 84<br />
110 100 16 748 440 714 26.50 2 30 162 037 162 6 94 ‐ 104 5 104<br />
140 125 16 748 440 716 29.90 2 30 162 037 192 6 127 ‐ 137 5 137<br />
160 ‐ 180 150 16 748 440 717 35.90 2 30 162 037 218 8 150 ‐ 160 6 160<br />
225 200 16 748 440 720 46.90 2 30 162 037 273 8 207 ‐ 220 6 220<br />
250 250 16 748 440 721 61.10 2 30 162 037 328 8 238 ‐ 252 6 252<br />
280 250 16 748 440 722 64.70 2 30 162 037 328 8 264 ‐ 274 6 274<br />
315 300 16 748 440 723 77.00 2 30 162 037 378 8 296 ‐ 306 6 306<br />
355 350 16 748 440 724 132.80 2 30 162 037 438 10 340 ‐ 355 7 355<br />
400 400 16 748 440 725 161.90 2 30 162 037 489 10 385 ‐ 400 7 400<br />
450 500 16 748 440 726 209.20 2 30 162 037 594 10 393 ‐ 403 7 403<br />
39
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Flexible Hoses<br />
PF 2 B3 A57 002<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Flexible hose, EPDM with stainless steel adaptors and male/female threads G<br />
Model:<br />
• EPDM flexible hose<br />
• Stainless steel adaptors<br />
• Pre-Insulation made from NBR foam with outer jacket impact resistant and tearproof<br />
• With loose union nut G on one end and male thread GA on the other<br />
DN<br />
(mm)<br />
G/GA<br />
(inch)<br />
PN<br />
(bar)<br />
Code<br />
EUR<br />
20 3/4" 16 738 924 307 371.00<br />
25 1" 16 738 924 308 391.40<br />
32 1 1/4" 16 738 924 309 420.70<br />
40 1 1/2" 16 738 924 310 559.20<br />
di<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
r<br />
(mm)<br />
closest inch<br />
(inch)<br />
19 75 70 1000 877 57 67 65 3<br />
∕4<br />
25 82 76 1000 876 56 68 90 1<br />
32 87 83 1000 874 57 69 120 1 1 ∕4<br />
48 90 89 1500 1369 57 74 155 1 1 ∕2<br />
40
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> afsluiters<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> afsluiters<br />
PF 2 B3 B03 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Ball valve type 546, hand-operated<br />
Model:<br />
• Material: ABS with spigot PE100 SDR11, metric<br />
• Ball seals PTFE<br />
• Integrated stainless steel mounting inserts<br />
• Including insulation half shells<br />
• Separate Fittings type A needed for joining<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
kv-value<br />
(Δp=1 bar)<br />
(l ⁄ min)<br />
EPDM<br />
Code<br />
EUR Weight<br />
(kg)<br />
32 25 10 700 138 546 108 151.40 0.542<br />
40 32 10 1000 138 546 109 201.30 0.887<br />
50 40 10 1600 138 546 110 226.50 1.165<br />
63 50 10 3100 138 546 111 305.00 2.100<br />
75 65 10 5000 138 546 112 623.10 5.125<br />
90 80 10 7000 138 546 113 857.40 7.173<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L3<br />
(mm)<br />
H<br />
(mm)<br />
H1<br />
(mm)<br />
H2<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
closest inch<br />
(inch)<br />
32 25 135 97 82 152 36 97 98 36 12 223 76 76 1<br />
40 32 157 117 97 170 40 128 119 44 15 249 82 82 1 1 ∕4<br />
50 40 169 117 97 184 44 128 125 51 15 271 91 91 1 1 ∕2<br />
63 50 204 132 117 227 48 152 150 64 15 321 110 110 2<br />
75 65 235 147 132 276 55 270 194 85 15 386 125 125 2 1 ∕2<br />
90 80 255 168 147 297 62 270 200 105 15 421 140 140 3<br />
41
PF 2 B3 B03 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Ball valve type 179, electric<br />
Model:<br />
• Material: ABS with spigot PE100 SDR11, metric<br />
• Ball seals PTFE<br />
• Integrated stainless steel mounting inserts<br />
• Voltage 100-230V, 50-60Hz<br />
• Factory set control range 90°<br />
• Heating element, position feedback (Open/Close/ Middle)<br />
• Including insulation half shells<br />
• Separate Fittings type A needed for joining<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
(bar)<br />
kv-value<br />
(dp=1bar)<br />
Code EUR Weight<br />
(kg)<br />
32 25 10 700 138 546 208 1,176.60 2.838<br />
40 32 10 1000 138 546 209 1,279.90 3.174<br />
50 40 10 1600 138 546 210 1,328.60 3.452<br />
63 50 10 3100 138 546 211 1,417.00 4.475<br />
75 65 10 5000 138 546 212 1,647.90 7.156<br />
90 80 10 7000 138 546 213 2,207.70 13.000<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L3<br />
(mm)<br />
L4<br />
(mm)<br />
H<br />
(mm)<br />
H1<br />
(mm)<br />
H2<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
32 25 135 97 82 152 36 190 25 228 36 12 223 76 71 M6<br />
40 32 157 117 97 170 40 190 45 240 44 15 249 82 85 M8<br />
50 40 169 117 97 184 44 190 45 246 51 15 271 91 89 M8<br />
63 50 204 132 117 227 48 190 45 263 64 15 321 110 101 M8<br />
75 65 235 147 132 276 55 190 70 322 85 15 386 125 136 M8<br />
90 80 255 168 147 297 62 190 70 357 105 15 421 140 141 M8<br />
M<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
closest inch<br />
(inch)<br />
32 25 1<br />
40 32 1 1 ∕4<br />
50 40 1 1 ∕2<br />
63 50 2<br />
75 65 2 1 ∕2<br />
90 80 3<br />
42
PF 2 B3 B03 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Butterfly valve kit type 567, hand-operated<br />
Model:<br />
• Material: ABS with spigot PE100 SDR11, metric<br />
• Including flange adaptors, backing flanges PP-Steel, bolts and insulation half shells<br />
• Separate Fittings type A needed for joining<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
kv-value<br />
(Δp=1 bar)<br />
(l ⁄ min)<br />
EPDM<br />
Code<br />
EUR Weight<br />
(kg)<br />
110 100 10 6500 138 567 114 1,394.10 8.950<br />
160 150 10 16600 138 567 117 1,991.20 17.975<br />
225 200 10 39600 138 567 120 3,166.50 28.316<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
L3<br />
(mm)<br />
H<br />
(mm)<br />
H1<br />
(mm)<br />
H2<br />
(mm)<br />
H3<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
110 100 310 188 168 556 72 255 106 325 104 167 55 696 320 56<br />
160 150 358 259 720 90 255 115 143 143 203 55 895 412 72<br />
225 200 409 325 776 110 408 149 465 170 210 85 996 462 73<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
closest inch<br />
(inch)<br />
110 100 4<br />
160 150 5<br />
225 200 8<br />
PF 2 B3 B03 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Butterfly valve kit type 145, electric<br />
Model:<br />
• Material: ABS with spigot PE100 SDR11, metric<br />
• Voltage 100-230V, 50-60Hz<br />
• Factory set control range 90°<br />
• Heating element, position feedback (Open/Close/ Middle)<br />
• Including flange adaptors, backing flanges PP-Steel, bolts and insulation half shells<br />
• Separate Fittings type A needed for joining<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
PN<br />
kv-value<br />
(Δp=1 bar)<br />
(l ⁄ min)<br />
EPDM<br />
Code<br />
EUR Weight<br />
(kg)<br />
110 100 10 6500 138 567 214 2,797.70 13.320<br />
160 150 10 16500 138 567 217 3,814.30 22.346<br />
225 200 10 39600 138 567 220 4,964.10 36.037<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
D2<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
L2<br />
(mm)<br />
L3<br />
(mm)<br />
H<br />
(mm)<br />
H1<br />
(mm)<br />
H2<br />
(mm)<br />
H3<br />
(mm)<br />
z<br />
(mm)<br />
z1<br />
(mm)<br />
z2<br />
(mm)<br />
110 100 310 188 168 552 72 179 122 460 104 167 190 696 320 56<br />
160 150 358 259 720 90 179 122 535 143 203 190 895 412 72<br />
225 200 409 325 776 110 179 122 580 170 210 200 996 462 73<br />
d<br />
(mm)<br />
DN<br />
(mm)<br />
closest inch<br />
(inch)<br />
110 100 4<br />
160 150 6<br />
225 200 8<br />
43
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> accessoires<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> accessoires<br />
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Barrel nipple<br />
Model:<br />
• PE100, SDR11/17, metric<br />
• For the shortest possible connection between fittings<br />
• For media temperatures between 0°C up to 60°C<br />
• COOl-<strong>FIT</strong> <strong>4.0</strong> Adhesive ring needed for joining<br />
d<br />
(mm)<br />
SDR PN Code EUR Weight<br />
(kg)<br />
z<br />
(mm)<br />
closest inch<br />
(inch)<br />
32 11 16 738 910 408 18.40 0.020 72 1<br />
40 11 16 738 910 409 20.90 0.034 80 1 1 ∕4<br />
50 11 16 738 910 410 22.80 0.059 88 1 1 ∕2<br />
63 11 16 738 910 411 24.30 0.101 96 2<br />
75 11 16 738 910 412 25.50 0.162 110 2 1 ∕2<br />
90 11 16 738 910 413 34.50 0.264 124 3<br />
110 11 16 738 910 414 40.20 0.454 144 4<br />
160 17 10 738 910 417 on request 0.798 180 6<br />
225 17 10 738 910 420 on request 1.885 220 8<br />
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> adhesive ring<br />
Model:<br />
• Double sided, for sealing connections of fittings with barrel nipple<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
32 90 738 010 013 5.10 0.002<br />
40, 50 110 738 010 014 5.40 0.003<br />
63 125 738 010 015 5.60 0.003<br />
75 140 738 010 016 5.90 0.003<br />
90 160 738 010 017 6.30 0.005<br />
110 180 738 010 018 on request 0.005<br />
160 250 738 010 021 on request 0.009<br />
PF 2 B3 B73 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Assembly Aid-Kit<br />
Model:<br />
• For simplified mounting of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fitting on <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Pipe<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
pieces/kit<br />
32 - 225 90 - 315 799 738 501 242.40 5.600 2 / Dimension<br />
32 90 799 738 511 24.20 0.384 6<br />
40 - 50 110 799 738 512 27.00 0.456 6<br />
63 125 799 738 513 28.30 0.504 6<br />
75 140 799 738 514 30.00 0.564 6<br />
90 160 799 738 515 34.30 0.636 6<br />
110 180 799 738 516 37.20 0.708 6<br />
160 250 799 738 519 27.20 0.620 4<br />
225 315 799 738 522 30.70 0.760 4<br />
44
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Insulation for welding indicator-kit<br />
Model:<br />
• Type A suitable for <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fittings d32-d110<br />
• Type B suitable for <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fittings d160 and coupler d225<br />
• Type C suitable for <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fittings d225 except coupler<br />
d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
Type pieces/kit<br />
32 - 110 738 010 052 17.10 0.090 A 20<br />
160 - 225 738 010 053 11.10 0.200 B 10<br />
225 738 010 054 17.10 0.033 C 10<br />
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Sealing clamp-kit<br />
Model:<br />
• Supports the function of the top sealing lip of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fittings for vertical installations<br />
outdoor<br />
• Material: stainless steel 304/V2A<br />
• Color: black<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
pieces/kit<br />
32 90 738 013 013 13.20 0.250 6<br />
40 - 50 110 738 013 014 13.60 0.300 6<br />
63 125 738 013 015 15.10 0.300 6<br />
75 140 738 013 016 15.50 0.300 6<br />
90 160 738 013 017 16.60 0.300 6<br />
110 180 738 013 018 17.60 0.300 6<br />
160 250 738 013 021 19.40 0.390 6<br />
225 315 738 013 023 25.80 0.450 6<br />
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Sealing tape<br />
Model:<br />
• Supports the function of the top sealing lip of <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Fittings for vertical installations<br />
outdoor<br />
• 30m on a roll, 25mm width, buthylene rubber-based<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
32 - 225 90 - 315 738 013 031 28.10 1.400<br />
PF 2 B3 A60 001<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Transition of Insulation<br />
Model:<br />
• For a moistur-proof and vapour tight transition of insulations from <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> to <strong>COOL</strong>-<strong>FIT</strong><br />
2.0<br />
• 4.5m on a roll, buthylene rubber-based<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
32-110 90-180 738 013 041 38.50 1.400<br />
45
PF 2 33 372 999<br />
Sealing tape<br />
Model:<br />
• For a water- and steam-tight sealing of inspection gaps in combination with shrink sleeves/ -<br />
sockets<br />
• Sealing tape: 40mm width, buthylene rubber-based<br />
• 30 m on a roll<br />
D<br />
(mm)<br />
d-d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
Closest inch<br />
(inch)<br />
90 ‐ 450 25 ‐ 315 738 011 152 119.70 2.134 3<br />
∕4 ‐ 12<br />
Shrink socket PE<br />
Model:<br />
• For a water- and steam-tight sealing in combination with buthylene rubber-based sealing tape<br />
• Length: 100 mm<br />
• "Heavy duty" version for high end applications<br />
• For connections of the same pipe outer diameter<br />
d<br />
(mm)<br />
D<br />
(mm)<br />
Code EUR PF SP Weight<br />
(kg)<br />
L<br />
(mm)<br />
250 355 738 011 024 77.10 2 33 372 999 1 0.900 100<br />
280 400 738 011 025 89.70 2 33 372 999 1 1.100 100<br />
315 450 738 011 026 108.50 2 33 372 999 1 1.900 100<br />
355 500 738 011 027 164.40 2 B3 A60 001 1 1.000 100<br />
400 560 738 011 028 217.90 2 B3 A60 001 1 1.000 100<br />
450 630 738 011 029 248.20 2 B3 A60 001 1 1.000 100<br />
PF 2 33 372 999<br />
Cold shrink tape PE black<br />
Model:<br />
• For indoor use only<br />
• Width (L) available in 100mm<br />
• 15 m on a roll<br />
• Shrinks without heat application<br />
D<br />
(mm)<br />
d-d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
Closest inch<br />
(inch)<br />
90 ‐ 450 25 ‐ 315 738 011 107 236.50 1.400 3<br />
∕4 ‐ 8<br />
46
PF 2 33 372 030<br />
Hot shrink tape PE black<br />
Model:<br />
• For watertight sealing of outer pipe in underground installations<br />
• Mastic backed<br />
• 30 m on a roll<br />
• Shrink with a burner or hot air gun<br />
• Order sealing patches separately (738 011 109)<br />
D<br />
(mm)<br />
d-d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L<br />
(mm)<br />
Closest inch<br />
(inch)<br />
90 - 630 25 - 450 738 011 108 1,465.40 3.000 150 3<br />
∕4 - 18<br />
PF 2 33 372 030<br />
Sealing patch<br />
Model:<br />
• For sealing of hot-shrink-tape in underground installations<br />
• Mastic backed<br />
• 1 patch needed per seal<br />
D<br />
(mm)<br />
d-d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L<br />
(mm)<br />
Closest inch<br />
(inch)<br />
90 - 630 25 - 450 738 011 109 5.50 0.100 150 3<br />
∕4 - 18<br />
PF 3 10 588 500<br />
Long adapters<br />
• Adapters for Electrofusion units with 4 mm connectors.<br />
• Longer version, suitable for all <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> dimensions.<br />
Type Code EUR Weight<br />
(kg)<br />
Description<br />
4,0 mm 790 128 035 108.50 0.058 Angle adapters pair, black<br />
47
PF 2 33 372 040<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> fixed point<br />
Model:<br />
• The product consists of two components namely electrofusion tapes and pipe brackets.<br />
• Electrofusion welded tape as permanent connection to transmit the forces that occur in the<br />
pipe to the fixed point.<br />
• The delivered pipe brackets are needed to deliver welding pressure during installtion and give<br />
stability during operation.<br />
• For welding, use an MSA2.x, MSA4.x, MSA 250, 300, 350, 400 or commercially available 220 V<br />
fusion machines.<br />
• If you use an MSA fusion machine from GF Piping Systems, use the 799 350 339 adapter or the<br />
790 156 032 y-cable set.<br />
• Please take note of the maximum allowed forces for this version in the table below.<br />
• Fixed point brackets and cross braces have to be calculated and obtained by the installer.<br />
They are not included in the fixed point set from GF.<br />
D<br />
(mm)<br />
d<br />
(mm)<br />
Code EUR SP Weight<br />
(kg)<br />
L<br />
(mm)<br />
H<br />
(mm)<br />
max Force<br />
(kN)<br />
Closest inch<br />
(inch)<br />
90 32 738 912 013 158.90 1 0.895 170 60 2.0 1 1 ∕4 - 1 1 ∕2<br />
110 40 - 50 738 912 014 176.10 1 0.904 180 60 3.0 / 5.0 2<br />
125 63 738 912 015 203.80 1 1.103 215 60 8.0 2 1 ∕2<br />
140 75 738 912 016 229.00 1 1.188 220 60 10.0 3<br />
160 90 738 912 017 282.40 1 1.177 255 60 10.0 4<br />
180 110 738 912 018 282.40 1 1.530 255 60 10.0 4<br />
250 160 738 912 021 423.70 1 1.957 335 60 10.0 6<br />
315 225 738 912 023 474.70 1 2.388 400 60 10.0 8<br />
355 250 738 912 024 643.60 1 2.388 420 60 10.0 10<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong>F fixed point set<br />
Model:<br />
• Four PVC-U half shells as permanent connection to transmit the forces that occur in the pipe to<br />
the fixed point.<br />
• For cementing use Tangit RAPID, Tangit RAPID static mixer and Tangit RAPID dispenser<br />
• Please take note of the maximum allowed forces for this version in the table below.<br />
• Fixed point brackets and cross braces have to be calculated and obtained by the installer.<br />
They are not included in the fixed point set from GF.<br />
D<br />
(mm)<br />
d<br />
(mm)<br />
Code EUR SP Weight<br />
(kg)<br />
L<br />
(mm)<br />
H<br />
(mm)<br />
max Force<br />
(kN)<br />
Closest inch<br />
(inch)<br />
250 160 738 912 321 89.90 1 1.620 284 35 10.0 10<br />
315 225 738 912 323 122.20 1 1.820 356 35 10.0 12<br />
PF 3 10 588 900<br />
<strong>COOL</strong>-<strong>FIT</strong> Y cables kit<br />
• The <strong>COOL</strong>-<strong>FIT</strong> Y cables are used to speed up the installation of the fixed points electrofusion<br />
tapes. The Y cables allow the welding in parallel of 2 E-Tapes, halving the total duration of the<br />
fusion process.<br />
• Compatible with all MSA Units<br />
Type Code EUR Weight<br />
(kg)<br />
4 leads cable with 2mm plugs in output 790 156 032 227.60 0.385<br />
48
PF 2 33 372 030<br />
<strong>COOL</strong>-<strong>FIT</strong> ABS Plus Cap PE black<br />
Model:<br />
• To seal the end of a <strong>COOL</strong>-<strong>FIT</strong> Plus pipe<br />
D<br />
(mm)<br />
D1<br />
(mm)<br />
d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
L<br />
(mm)<br />
closest<br />
inch<br />
(inch)<br />
355 265 250 733 960 185 239.10 0.155 35 10<br />
400 300 280 733 960 186 259.70 0.185 35 10<br />
450 335 315 733 960 187 278.70 0.225 35 12<br />
500 370 355 733 963 188 351.20 0.269 35 14<br />
560 420 400 733 963 189 413.80 0.269 35 16<br />
630 470 450 733 963 190 455.00 0.269 35 18<br />
PF 2 28 473 002<br />
Tangit KS Cleaning Tissues<br />
• Special cleaner for plastic fusion connections in the materialof PP, PE, PVDF and PB<br />
• Suitable for Tangit Rapid. Must not be used for solvent cementing<br />
Code EUR SP Number<br />
200 000 524 41.00 8 100 stuks<br />
PF 2 28 473 010<br />
Tangit Rapid cartridges kit (only for fixed points F-version pipe)<br />
• 2-Component-Adhesive<br />
• For PVC-U and PVC-C<br />
• Tangit Rapid Kit consists of 6 cartridges, 12 mixers and 2 plastic brushes<br />
• Tool needed: Tangit Rapid dispenser and mixers<br />
• Check chemical resistance list (www.gfps.com)<br />
Code EUR SP Weight<br />
(kg)<br />
description<br />
Language<br />
799 302 041 252.10 1 0.566 50 ml FR, <strong>NL</strong><br />
799 302 007 994.60 1 3.700 400 ml<br />
DE, ES, FR, GB,<br />
IT, <strong>NL</strong>, PT<br />
PF 2 28 473 010<br />
Tangit Rapid dispenser (only for fixed points F-version pipe)<br />
• For Tangit Rapid cartridges<br />
d-d<br />
(mm)<br />
Code EUR SP Weight<br />
(kg)<br />
description<br />
16 - 140 799 302 011 124.30 1 0.175 50ml<br />
110 - 400 799 302 013 439.50 1 1.100 400ml<br />
49
PF 2 51 305 001<br />
Marker<br />
Type Code EUR Weight<br />
(kg)<br />
silver 799 350 364 9.50 0.010<br />
PF 2 30 162 023<br />
Pipe clip type 060 PP metric<br />
Model:<br />
• Material: clip and safety clip PP black, UV resistant<br />
• Minimum order quantity: standard packaging SP or gross packaging GP<br />
• Accidental opening of the safety clip is not possible<br />
• Clip and safety clip are not assembled in the packaging.<br />
• Pipes with flanges can be installed directly<br />
d<br />
(mm)<br />
d<br />
(inch)<br />
Code EUR SP Weight<br />
(kg)<br />
90 3 167 060 038 11.00 10 0.144<br />
110 167 060 039 12.90 10 0.158<br />
125 167 060 040 17.90 10 0.249<br />
140 5 167 060 041 21.50 10 0.260<br />
160 167 060 042 24.60 10 0.296<br />
180 167 060 043 26.50 10 0.327<br />
250 167 060 021 54.20 5 0.657<br />
315 167 060 023 68.70 5 0.805<br />
355 167 060 024 76.70 5 1.251<br />
400 167 060 025 82.80 4 1.031<br />
d<br />
(mm)<br />
d<br />
(inch)<br />
closest<br />
inch<br />
(inch)<br />
D<br />
(mm)<br />
L<br />
(mm)<br />
L1<br />
(mm)<br />
H<br />
(mm)<br />
H1<br />
(mm)<br />
H2<br />
(mm)<br />
90 3 3 9 89 71 105 15 33 M 8<br />
110 4 9 94 80 115 15 33 M 8<br />
125 11 116 91 130 20 35 M10<br />
140 5 5 11 121 99 130 20 35 M10<br />
160 6 11 131 107 148 20 35 M10<br />
180 7 11 143 115 163 20 35 M10<br />
250 9 13 183 143 200 25 39 M12<br />
315 12 13 219 171 225 25 39 M12<br />
355 14 17 275 209 258 30 50 M16<br />
400 16 17 300 228 288 30 50 M16<br />
SC<br />
50
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> heat tracing<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> Heat Tracing<br />
PF 2 B3 K01 001<br />
Self regulating heating cable<br />
Model:<br />
• for pipe freeze protection<br />
• cut to length on site<br />
• suitable for in-pipe applications (inside the medium)<br />
• zero maintenance after installation and commissioning<br />
• no risk of overheating due to self-regulating technology<br />
• Cables featuring self-regulating technology. The heat output automatically adjusts depending<br />
on the local temperature at every point along ist length. It never overheats even when overlapping<br />
L<br />
(m)<br />
Code<br />
EUR Weight<br />
(kg)<br />
200 790 738 001 7,190.70 14.400<br />
62 790 738 003 2,229.10 4.460<br />
40 790 738 005 1,438.10 2.280<br />
20 790 738 007 719.10 1.440<br />
PF 2 B3 K01 001<br />
Surface sensing programmable thermostat with alarm relay<br />
• The surface sensing thermostat is designed to provide user friendly measurement and control<br />
for heating cables. The thermostat has a 25 A control relay (that can be arranged to be volt<br />
free) and a 2 A volt free SPDT alarm relay. Parameter and eventual alarm conditions are shown<br />
on the digital display and settings can be programmed easily, even without power supply. The<br />
thermostat is supplied with a Pt100 sensor. This sensor has a 3 m long silicone extension cable<br />
giving freedom to locate the electronics remote from the sensor. Two M25 entries allow for the<br />
power cable and heating cable to be connected directly into the unit.<br />
Code EUR<br />
790 738 030 686.60<br />
PF 2 B3 K01 001<br />
Cable gland<br />
• For the leading the heating inside and outside the <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> piping via threaded fitting<br />
Model:<br />
• Material: brass<br />
• threaded connection: 3/4 " male thread R<br />
R<br />
(inch)<br />
Code<br />
EUR Weight<br />
(kg)<br />
3<br />
∕4 790 738 020 47.60 0.146<br />
51
PF 2 B3 K01 001<br />
Cold lead connection and end seal kit<br />
• For heating cables for <strong>COOL</strong>-<strong>FIT</strong><br />
Model:<br />
• Heat-shrink technique<br />
Inclusive:<br />
• Crimps<br />
• Cold lead shrinkable sleeves<br />
• End seal shrinkable sleeves<br />
• Mastic<br />
Code<br />
EUR Weight<br />
(kg)<br />
790 738 010 43.90 0.045<br />
52
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> gereedschap<br />
<strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> gereedschap<br />
PF 2 B3 B73 001<br />
<strong>COOL</strong>-<strong>FIT</strong> 2.0/<strong>4.0</strong> Foam removal and peeling tool<br />
Model:<br />
• Tool for foam removal and peeling of <strong>COOL</strong>-<strong>FIT</strong> 2.0 and <strong>4.0</strong> pipes<br />
d<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
32-90 799 738 001 2,84<strong>4.0</strong>0 10.500<br />
110-225 799 738 003 3,746.40 16.500<br />
250-450 799 738 004 12,379.70 71.000<br />
Peeling tool RTC<br />
• Rotary peeler for reliable pipe preparation prior to electrofusion<br />
• Applicable on pipe ends and spigot ends of fittings<br />
• Scope of delivery 315: 1 Scraper arm, 1 Self-centering chuck base, 1 Aluminium transport<br />
case<br />
• Scope of delivery 710: 1 Scraper arm, 1 Self-centering chuck base, 2 Aluminium transport<br />
case<br />
If the peeling tool d250-450 (799 738 004) requires too much space, you can use the <strong>COOL</strong>-<strong>FIT</strong><br />
RTC-315. The peeling tool <strong>COOL</strong>-<strong>FIT</strong> RTC-315 is suitable for peeling of pre-insulated <strong>COOL</strong> <strong>FIT</strong><br />
pipes on sites where sufficient space is an issue. In this case the insulation needs to be removed<br />
manually.<br />
Scope of delivery: 1 Scraper arm, 1 Self-centering chuck base, 1 Aluminium transport case, 1<br />
screwdriver, 1 deburing knife.<br />
d-d<br />
(mm)<br />
Code EUR PF Weight<br />
(kg)<br />
Description<br />
75 ‐ 315 799 150 423 4,073.10 2 33 372 050 9.616 max. working-range 185 mm<br />
355 ‐ 710 799 300 757 3,981.90 2 51 305 001 31.400 max. working-range 530 mm<br />
53
PF 3 10 588 200<br />
MSA 2.1 Automatic Electrofusion Unit with protocols retrieval<br />
The MSA 2.1 automatic electro fusion unit combines light weight and high efficiency, thanks to its<br />
inverter technology and furthermore provides fusion documentation in PDF. The unit is extremely<br />
fast and simple, with three basic operations required to operator: connect, scan, start the fusion.<br />
It is robust, safe and ergonomic.<br />
All is meant to simplify the job: the barcode scanner, for long distance reading, the cooling system<br />
to joint in series, the icon system, to keep the interaction between user and machine intuitive.<br />
The entire welding process is controlled and regulated with energy output compensation depending<br />
on ambient temperature and the indication of cooling time.<br />
The unit has 1000 protocols permanently stored in the internal memory. The user can copy the<br />
fusion reports in an USB stick to print them out in PDF format.<br />
Scope of delivery includes: transport box, angle adapters (<strong>4.0</strong> mm and 4.7 mm), operating instructions,<br />
START/STOP badge and USB memory stick with PC applications.<br />
Technical Data:<br />
• Operating temperature: -20°C to +50°C<br />
• Mains voltage and frequency: 230V (190V - 265V), 50-60Hz<br />
• Fusion voltage: 8-42 V (48 V)<br />
• Fusion data input mode: bar code, manual<br />
• Fusion current: 90 A (max)<br />
• Suggested power generators: 3.5 kVA<br />
• USB Port: Type A<br />
• Protection factor: Class 1 / IP 65<br />
• Mains cable: 4 m / Fusion cable: 4 m<br />
• Weight: ca. 11.9 kg<br />
• Display: Graphical LCD, adjustable contrast<br />
• Independent from languages<br />
Type Code EUR Weight<br />
(kg)<br />
Barcode scanner, transport case, mini<br />
Welding Book<br />
790 156 003 4,154.30 20.000<br />
PF 2 51 305 008<br />
Quadruple clamp with universal link<br />
• Recommended for the installation of fittings <strong>COOL</strong>-<strong>FIT</strong> and ELGEF Plus<br />
• The clamping allows installation without tension and avoids movement during fusion and cooling<br />
time<br />
• The centrally located adjustable universal link allows installation of electrofusion couplers, elbows<br />
and reducers<br />
• Universal use; works above, below and alongside the joint<br />
• Adaptor for use with Tee-pieces available (see accessories)<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
40 200 799 301 489 1,223.80 8.300<br />
160 630 799 301 495 2,786.40 23.300<br />
Description<br />
Scope of delivery:<br />
4 x V-block, 2<br />
x Straight bar, 1<br />
x Universal link,<br />
Transport bag<br />
(600x380x250)<br />
Scope of delivery:<br />
4 x V-block, 2<br />
x Straight bar, 1<br />
x Universal link,<br />
Transport bag<br />
(780x780x580)<br />
L<br />
(mm)<br />
B<br />
(mm)<br />
H<br />
(mm)<br />
960 290 230<br />
1300 670 550<br />
PF 2 51 305 008<br />
Tee adaptor<br />
• Suitable for clamping tool (799301489 - 495)<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
Description<br />
L<br />
(mm)<br />
B<br />
(mm)<br />
H<br />
(mm)<br />
40 200 799 301 491 202.50 0.610 Tee adaptor 600 50 40<br />
160 630 799 301 497 277.70 3.500 Tee adaptor 1070 75 60<br />
54
PF 2 51 305 008<br />
V-block<br />
• Suitable for clamping tool (799301489 - 495)<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
Description<br />
L<br />
(mm)<br />
B<br />
(mm)<br />
H<br />
(mm)<br />
40 200 799 301 492 192.90 1.000 V-block complete 290 230 65<br />
160 630 799 301 498 409.40 3.200 V-block complete 660 430 90<br />
PF 2 51 305 008<br />
Bar extension<br />
• Suitable for clamping tool (799301489 - 495)<br />
d<br />
(mm)<br />
d1<br />
(mm)<br />
Code<br />
EUR Weight<br />
(kg)<br />
Description<br />
L<br />
(mm)<br />
B<br />
(mm)<br />
H<br />
(mm)<br />
160 630 799 301 499 192.90 1.000 Bar extension 1000 40 40<br />
55
Index<br />
Code Page EUR<br />
138 546 108 41 151.40<br />
138 546 109 41 201.30<br />
138 546 110 41 226.50<br />
138 546 111 41 305.00<br />
138 546 112 41 623.10<br />
138 546 113 41 857.40<br />
138 546 208 42 1,176.60<br />
138 546 209 42 1,279.90<br />
138 546 210 42 1,328.60<br />
138 546 211 42 1,417.00<br />
138 546 212 42 1,647.90<br />
138 546 213 42 2,207.70<br />
138 567 114 43 1,394.10<br />
138 567 117 43 1,991.20<br />
138 567 120 43 3,166.50<br />
138 567 214 43 2,797.70<br />
138 567 217 43 3,814.30<br />
138 567 220 43 4,964.10<br />
167 060 021 50 54.20<br />
167 060 023 50 68.70<br />
167 060 024 50 76.70<br />
167 060 025 50 82.80<br />
167 060 038 50 11.00<br />
167 060 039 50 12.90<br />
167 060 040 50 17.90<br />
167 060 041 50 21.50<br />
167 060 042 50 24.60<br />
167 060 043 50 26.50<br />
200 000 524 49 41.00<br />
724 700 426 37 1,255.20<br />
724 705 026 37 1,222.60<br />
727 700 208 36 14.60<br />
727 700 209 36 17.30<br />
727 700 210 36 20.60<br />
727 700 211 36 26.00<br />
727 700 212 36 28.70<br />
727 700 313 36 34.20<br />
727 700 314 36 42.40<br />
727 700 408 36 10.90<br />
727 700 409 36 13.00<br />
727 700 410 36 15.50<br />
727 700 411 36 19.40<br />
727 700 412 36 21.60<br />
727 700 513 36 25.90<br />
727 700 514 36 31.60<br />
727 700 516 36 44.30<br />
727 700 517 36 54.80<br />
727 700 520 36 79.50<br />
727 700 716 36 59.20<br />
727 700 717 36 72.90<br />
727 700 720 36 105.70<br />
727 700 721 36 134.10<br />
727 700 722 37 134.10<br />
727 700 723 37 196.00<br />
727 700 724 37 388.90<br />
727 700 725 37 442.60<br />
733 960 185 49 239.10<br />
733 960 186 49 259.70<br />
733 960 187 49 278.70<br />
733 963 188 49 351.20<br />
733 963 189 49 413.80<br />
733 963 190 49 455.00<br />
Code Page EUR<br />
738 003 121 24 1,754.20<br />
738 003 122 24 2,152.40<br />
738 003 123 24 2,563.20<br />
738 003 124 24 3,204.50<br />
738 003 175 24 3,947.00<br />
738 003 176 24 5,128.80<br />
738 010 013 44 5.10<br />
738 010 014 44 5.40<br />
738 010 015 44 5.60<br />
738 010 016 44 5.90<br />
738 010 017 44 6.30<br />
738 010 018 44 on request<br />
738 010 021 44 on request<br />
738 010 052 45 17.10<br />
738 010 053 45 11.10<br />
738 010 054 45 17.10<br />
738 011 024 46 77.10<br />
738 011 025 46 89.70<br />
738 011 026 46 108.50<br />
738 011 027 46 164.40<br />
738 011 028 46 217.90<br />
738 011 029 46 248.20<br />
738 011 107 46 236.50<br />
738 011 108 47 1,465.40<br />
738 011 109 47 5.50<br />
738 011 152 46 119.70<br />
738 013 013 45 13.20<br />
738 013 014 45 13.60<br />
738 013 015 45 15.10<br />
738 013 016 45 15.50<br />
738 013 017 45 16.60<br />
738 013 018 45 17.60<br />
738 013 021 45 19.40<br />
738 013 023 45 25.80<br />
738 013 031 45 28.10<br />
738 013 041 45 38.50<br />
738 053 121 25 1,616.70<br />
738 053 122 25 1,978.90<br />
738 053 123 25 2,363.90<br />
738 053 124 25 2,842.00<br />
738 053 175 25 3,679.10<br />
738 053 176 25 4,908.80<br />
738 103 108 24 81.10<br />
738 103 109 24 92.70<br />
738 103 110 24 98.00<br />
738 103 111 24 106.30<br />
738 103 112 24 135.60<br />
738 103 113 24 175.90<br />
738 103 114 24 243.50<br />
738 103 117 24 439.30<br />
738 103 120 24 774.90<br />
738 153 108 25 80.10<br />
738 153 109 25 94.90<br />
738 153 110 25 100.50<br />
738 153 111 25 107.10<br />
738 153 112 25 126.20<br />
738 153 113 25 171.80<br />
738 153 114 25 239.70<br />
738 153 117 25 410.00<br />
738 153 120 25 704.50<br />
738 173 021 22 466.50<br />
738 173 022 22 590.90<br />
Code Page EUR<br />
738 173 023 22 709.10<br />
738 173 024 22 869.60<br />
738 173 108 22 32.40<br />
738 173 109 22 41.10<br />
738 173 110 22 46.80<br />
738 173 111 22 63.50<br />
738 173 112 22 80.70<br />
738 173 113 22 100.20<br />
738 173 114 22 123.00<br />
738 173 117 22 201.10<br />
738 173 120 22 309.50<br />
738 173 125 22 1,043.50<br />
738 173 126 22 1,303.50<br />
738 173 317 22 231.20<br />
738 173 320 22 397.30<br />
738 203 108 26 87.70<br />
738 203 109 26 115.30<br />
738 203 110 26 126.00<br />
738 203 111 26 155.40<br />
738 203 112 26 180.90<br />
738 203 113 26 236.50<br />
738 203 114 26 29<strong>4.0</strong>0<br />
738 203 117 26 615.10<br />
738 203 120 26 1,130.40<br />
738 203 121 27 2,390.60<br />
738 203 122 27 2,888.30<br />
738 203 123 27 3,429.20<br />
738 203 124 27 4,369.90<br />
738 203 175 27 5,506.10<br />
738 203 176 27 9,364.20<br />
738 203 218 27 327.90<br />
738 203 222 27 364.20<br />
738 203 223 27 364.20<br />
738 203 227 27 594.60<br />
738 203 228 27 594.60<br />
738 203 229 27 594.60<br />
738 203 247 27 752.10<br />
738 203 249 27 752.10<br />
738 203 250 27 752.10<br />
738 203 264 27 963.50<br />
738 203 266 27 963.50<br />
738 203 267 27 963.50<br />
738 203 269 27 963.50<br />
738 204 251 27 940.00<br />
738 204 268 27 1,204.40<br />
738 313 608 30 257.00<br />
738 313 609 30 269.50<br />
738 313 610 30 286.00<br />
738 313 611 30 312.70<br />
738 313 612 30 353.20<br />
738 313 613 30 410.20<br />
738 313 614 30 461.40<br />
738 313 617 30 470.40<br />
738 313 620 30 578.60<br />
738 313 659 30 269.50<br />
738 313 660 30 286.00<br />
738 313 661 30 312.70<br />
738 313 662 30 353.20<br />
738 313 663 30 410.20<br />
738 313 664 30 461.40<br />
738 313 667 30 471.20<br />
738 313 670 30 579.30<br />
56
Index<br />
Code Page EUR<br />
738 513 608 31 149.80<br />
738 513 609 31 178.10<br />
738 513 610 31 201.20<br />
738 513 611 31 259.30<br />
738 513 708 32 96.90<br />
738 513 709 32 117.30<br />
738 513 710 32 140.60<br />
738 513 711 32 203.60<br />
738 513 712 32 314.10<br />
738 513 713 32 424.10<br />
738 513 714 32 503.00<br />
738 710 008 33 102.60<br />
738 710 009 33 115.80<br />
738 710 010 33 125.40<br />
738 710 011 33 138.80<br />
738 710 012 33 160.60<br />
738 710 013 33 176.30<br />
738 710 014 33 245.00<br />
738 710 016 33 339.90<br />
738 710 017 33 466.90<br />
738 710 020 33 677.80<br />
738 903 206 28 59.50<br />
738 903 209 28 72.20<br />
738 903 210 28 72.20<br />
738 903 212 28 92.30<br />
738 903 213 28 92.30<br />
738 903 214 28 92.30<br />
738 903 318 28 103.70<br />
738 903 322 28 120.40<br />
738 903 323 28 120.40<br />
738 903 327 28 191.20<br />
738 903 328 28 191.20<br />
738 903 329 28 191.20<br />
738 903 347 28 316.00<br />
738 903 349 28 316.00<br />
738 903 350 28 316.00<br />
738 903 364 28 471.00<br />
738 903 366 28 471.00<br />
738 903 367 28 471.00<br />
738 903 369 28 471.00<br />
738 903 825 29 1,231.80<br />
738 903 829 29 1,378.10<br />
738 903 830 29 1,378.10<br />
738 903 836 29 1,508.00<br />
738 903 837 29 1,508.00<br />
738 903 838 29 1,508.00<br />
738 903 844 29 2,041.70<br />
738 903 845 29 2,041.70<br />
738 903 846 29 2,041.70<br />
738 903 853 29 2,622.50<br />
738 903 854 29 2,622.50<br />
738 903 855 29 2,622.50<br />
738 903 862 29 3,55<strong>4.0</strong>0<br />
738 903 863 29 3,55<strong>4.0</strong>0<br />
738 903 864 29 3,55<strong>4.0</strong>0<br />
738 903 865 29 3,55<strong>4.0</strong>0<br />
738 904 351 28 316.00<br />
738 904 368 28 471.00<br />
738 910 408 44 18.40<br />
738 910 409 44 20.90<br />
738 910 410 44 22.80<br />
738 910 411 44 24.30<br />
Code Page EUR<br />
738 910 412 44 25.50<br />
738 910 413 44 34.50<br />
738 910 414 44 40.20<br />
738 910 417 44 on request<br />
738 910 420 44 on request<br />
738 911 821 23 454.80<br />
738 911 822 23 569.20<br />
738 911 823 23 684.60<br />
738 911 824 23 824.20<br />
738 911 875 23 976.50<br />
738 911 876 23 1,180.90<br />
738 912 013 48 158.90<br />
738 912 014 48 176.10<br />
738 912 015 48 203.80<br />
738 912 016 48 229.00<br />
738 912 017 48 282.40<br />
738 912 018 48 282.40<br />
738 912 021 48 423.70<br />
738 912 023 48 474.70<br />
738 912 024 48 643.60<br />
738 912 321 48 89.90<br />
738 912 323 48 122.20<br />
738 913 108 23 58.90<br />
738 913 109 23 63.70<br />
738 913 110 23 69.40<br />
738 913 111 23 77.40<br />
738 913 112 23 85.80<br />
738 913 113 23 100.60<br />
738 913 114 23 121.50<br />
738 913 117 23 162.70<br />
738 913 120 23 227.50<br />
738 913 408 30 60.10<br />
738 913 409 30 69.60<br />
738 913 410 30 76.80<br />
738 913 411 30 90.50<br />
738 913 412 30 114.40<br />
738 913 413 30 137.20<br />
738 913 414 30 165.70<br />
738 913 417 30 198.80<br />
738 913 420 30 255.10<br />
738 924 307 40 371.00<br />
738 924 308 40 391.40<br />
738 924 309 40 420.70<br />
738 924 310 40 559.20<br />
738 943 108 32 225.90<br />
738 943 308 31 114.50<br />
738 943 309 31 169.90<br />
738 943 310 31 225.50<br />
738 943 311 31 317.50<br />
738 943 318 31 118.60<br />
738 943 319 31 206.80<br />
738 943 328 31 123.70<br />
738 953 118 33 180.90<br />
748 440 708 38 19.50<br />
748 440 709 38 20.20<br />
748 440 710 38 20.90<br />
748 440 711 38 21.60<br />
748 440 712 38 22.10<br />
748 440 713 39 23.20<br />
748 440 714 39 26.50<br />
748 440 716 39 29.90<br />
748 440 717 39 35.90<br />
Code Page EUR<br />
748 440 720 39 46.90<br />
748 440 721 39 61.10<br />
748 440 722 39 64.70<br />
748 440 723 39 77.00<br />
748 440 724 39 132.80<br />
748 440 725 39 161.90<br />
748 440 726 39 209.20<br />
753 700 611 38 144.20<br />
753 700 612 38 154.20<br />
753 700 613 38 176.20<br />
753 700 614 38 193.70<br />
753 700 615 38 193.70<br />
753 700 616 38 275.20<br />
753 700 617 38 363.20<br />
753 700 620 38 563.50<br />
753 700 621 38 620.00<br />
753 700 622 38 792.00<br />
753 700 623 38 1,330.30<br />
753 700 624 38 2,154.60<br />
753 700 625 38 2,462.70<br />
753 700 626 38 4,405.60<br />
753 800 096 35 116.80<br />
753 800 097 35 177.30<br />
753 800 098 35 233.60<br />
753 800 299 35 371.70<br />
753 800 300 35 557.60<br />
753 800 301 35 1,459.30<br />
790 128 035 47 108.50<br />
790 156 003 54 4,154.30<br />
790 156 032 48 227.60<br />
790 738 001 51 7,190.70<br />
790 738 003 51 2,229.10<br />
790 738 005 51 1,438.10<br />
790 738 007 51 719.10<br />
790 738 010 52 43.90<br />
790 738 020 51 47.60<br />
790 738 030 51 686.60<br />
799 150 423 53 4,073.10<br />
799 300 757 53 3,981.90<br />
799 301 489 54 1,223.80<br />
799 301 491 54 202.50<br />
799 301 492 55 192.90<br />
799 301 495 54 2,786.40<br />
799 301 497 54 277.70<br />
799 301 498 55 409.40<br />
799 301 499 55 192.90<br />
799 302 007 49 994.60<br />
799 302 011 49 124.30<br />
799 302 013 49 439.50<br />
799 302 041 49 252.10<br />
799 350 364 50 9.50<br />
799 738 001 53 2,84<strong>4.0</strong>0<br />
799 738 003 53 3,746.40<br />
799 738 004 53 12,379.70<br />
799 738 501 44 242.40<br />
799 738 511 44 24.20<br />
799 738 512 44 27.00<br />
799 738 513 44 28.30<br />
799 738 514 44 30.00<br />
799 738 515 44 34.30<br />
799 738 516 44 37.20<br />
799 738 519 44 27.20<br />
57
Index<br />
Code Page EUR<br />
799 738 522 44 30.70<br />
58
Algemene Verkoop- en Leveringsvoorwaarden van Georg Fischer N.V.<br />
1. Definities<br />
Aanbod / Aanbieding: ieder aanbod van Georg Fischer tot het aangaan van een Overeenkomst;<br />
Diensten: alle (aanvullende) diensten en/of (technische) werkzaamheden, van welke aard dan ook, die door Georg Fischer worden<br />
verricht, in de ruimste zin;<br />
Georg Fischer: de naamloze vennootschap Georg Fischer N.V. te Epe (KvK-dossiernummer: 08058748), zijnde de gebruiker van de<br />
Voorwaarden;<br />
Goederen: de door Georg Fischer op basis van de Overeenkomst aan of ten behoeve van Wederpartij te leveren Goederen, zijnde<br />
zaken en/of vermogensrechten;<br />
Overeenkomst: iedere Overeenkomst tussen Partijen ter zake (ver)koop en levering van Goederen door Georg Fischer aan Wederpartij<br />
en/of het door Georg Fischer verlenen van Diensten aan Wederpartij;<br />
Partij(en): georg Fischer en Wederpartij c.q. ieder voor zich;<br />
Schriftelijk: per brief, fax, elektronisch bericht of deurwaardersexploot;<br />
Voorwaarden: deze Algemene Verkoopvoorwaarden van Georg Fischer;<br />
Wederpartij: de natuurlijke perso(o)n(en) en/of rechtsperso(o)n(en) aan wie Georg Fischer een Aanbieding doet tot de levering van<br />
Goederen en/of het verrichten van Diensten en/of wie met Georg Fischer een Overeenkomst aangaat.<br />
2. Toepasselijkheid<br />
2.1. Deze Voorwaarden zijn van toepassing op alle Aanbiedingen en Overeenkomsten, alsmede op alle daaruit voortvloeiende en<br />
daarop voortbouwende verbintenissen.<br />
2.2. Indien de Voorwaarden van toepassing zijn geweest op enige Overeenkomst, zijn deze automatisch – zonder dat dit nog<br />
afzonderlijk tussen de betreffende Partijen overeengekomen behoeft te worden – van toepassing op iedere nadien gesloten<br />
overeenkomst tussen Partijen, tenzij ter zake de betreffende overeenkomst uitdrukkelijk Schriftelijk tussen Partijen anders is<br />
overeengekomen.<br />
2.3. De toepasselijkheid op enige Overeenkomst van algemene of specifieke door Wederpartij gehanteerde voorwaarden wordt door<br />
Georg Fischer uitdrukkelijk van de hand gewezen, tenzij en nadat de bedoelde voorwaarden uitdrukkelijk Schriftelijk door Georg<br />
Fischer van toepassing zijn verklaard op een Overeenkomst. Aanvaarding op deze wijze van de toepasselijkheid van voorwaarden van<br />
Wederpartij op een Overeenkomst brengt in geen geval met zich mee dat die voorwaarden stilzwijgend ook op enige nadien gesloten<br />
Overeenkomst van toepassing zijn.<br />
2.4. In geval van nietigheid of vernietiging door Wederpartij van een of meer bepalingen van de Voorwaarden blijven de overige<br />
bepalingen van de Voorwaarden onverminderd van toepassing op de Overeenkomst. Partijen zullen in overleg treden om een nietige<br />
of vernietigde bepaling van de Voorwaarden te vervangen door een bepaling die wel geldig c.q. niet-vernietigbaar is en die zoveel<br />
mogelijk aansluit bij het doel en de strekking van de nietige c.q. vernietigde bepaling.<br />
2.5. Voor zover een Overeenkomst afwijkt van één of meer bepalingen van de Voorwaarden, prevaleert het bepaalde in de<br />
Overeenkomst. De overige bepalingen van de Voorwaarden blijven in dat geval onverminderd op de Overeenkomst van toepassing.<br />
3. Aanbiedingen<br />
3.1. Een Aanbod is, tenzij uitdrukkelijk anders vermeld, vrijblijvend en geldig gedurende de termijn vermeld in het Aanbod. Vermeldt het<br />
Aanbod geen termijn voor acceptatie, dan vervalt het Aanbod in ieder geval veertien (14) dagen na de datum vermeld in het Aanbod.<br />
3.2. Een door Wederpartij binnen de geldigheidstermijn geaccepteerd Aanbod kan door Georg Fischer gedurende vijf (5) werkdagen na<br />
de datum van ontvangst van de acceptatie door Georg Fischer worden herroepen, zonder dat dit leidt tot enige verplichting van Georg<br />
Fischer tot vergoeding van eventueel als gevolg daarvan door Wederpartij geleden schade.<br />
3.3. Een door Wederpartij gegeven opdracht kan door Georg Fischer worden bevestigd door middel van een opdrachtbevestiging.<br />
Indien Wederpartij niet binnen veertien (14) dagen na ontvangst van de opdrachtbevestiging hiertegen bezwaren heeft geuit, is de<br />
opdracht zoals omschreven in de opdrachtbevestiging aanvaard.<br />
3.4. Als Wederpartij aan Georg Fischer met het oog op het uitbrengen van een Aanbod gegevens, tekeningen en dergelijke verstrekt,<br />
mag Georg Fischer uitgaan van de juistheid hiervan en zal zij haar Aanbod hierop baseren. Wederpartij vrijwaart Georg Fischer voor<br />
elke aanspraak van derden met betrekking tot het gebruik van door of namens Wederpartij verstrekte tekeningen en dergelijke.<br />
4. Totstandkoming van overeenkomsten<br />
4.1. Met inachtneming van het overige in de Voorwaarden bepaalde, komt een Overeenkomst slechts tot stand:<br />
(a) door acceptatie door Wederpartij van een Aanbod;<br />
(b) door Schriftelijke opdrachtbevestiging van een door Wederpartij (mondeling of Schriftelijk) verstrekte opdracht anders dan op basis<br />
van een Aanbod;<br />
(c) doordat Georg Fischer feitelijk uitvoering geeft aan een opdracht van Wederpartij.<br />
4.2. De Overeenkomst komt in de plaats van en vervangt alle eerdere voorstellen, correspondentie, afspraken of andere communicatie<br />
tussen Partijen die heeft plaatsgevonden voorafgaand aan het aangaan van de Overeenkomst, hoezeer deze ook mogen afwijken van<br />
of in strijd zijn met de Overeenkomst.<br />
4.3. Wijzigingen van en/of aanvullingen op de Overeenkomst gelden uitsluitend na Schriftelijke aanvaarding hiervan door Georg<br />
Fischer. Georg Fischer is niet gehouden om wijzigingen en/of aanvullingen van een Overeenkomst te aanvaarden en is gerechtigd<br />
te eisen dat een afzonderlijke Overeenkomst wordt aangegaan. Georg Fischer is bevoegd eventuele kosten met betrekking tot de<br />
wijzigingen van en/of aanvullingen op de Overeenkomst aan Wederpartij door te belasten.<br />
4.4. Toezeggingen door en afspraken met ondergeschikten of vertegenwoordigers van Georg Fischer binden Georg Fischer slechts<br />
tegenover Wederpartij indien en voor zover deze toezeggingen en/of afspraken door Georg Fischer Schriftelijk zijn bekrachtigd of<br />
bevestigd aan Wederpartij.<br />
5. Prijzen en tarieven<br />
5.1. In een Aanbod of Overeenkomst vermelde prijzen luiden in Euro’s en zijn – tenzij uitdrukkelijk anders is aangegeven, danwel<br />
de levering DDP in Nederland plaatsvindt (zoals opgenomen in de meeste recente versie van ICC Incoterms) – exclusief kosten<br />
voor verpakking, vervoer en andere kosten van verzending, invoerdocumenten, (transport)verzekering(en), reistijd, reiskosten en<br />
verblijfskosten en tevens exclusief omzetbelasting en/of andere van overheidswege opgelegde heffingen, van welke aard dan ook.<br />
5.2. Wordt door Wederpartij een opdracht verstrekt aan Georg Fischer zonder dat een prijs uitdrukkelijk is overeengekomen, dan<br />
wordt deze, ongeacht voorheen gedane Aanbiedingen of voorheen gehanteerde prijzen, tegen de ten tijde van de uitvoering van de<br />
Overeenkomst geldende prijs uitgevoerd.<br />
5.3. Als na de datum waarop de Overeenkomst is gesloten vier (4) maanden verstrijken en de nakoming ervan door Georg Fischer<br />
nog niet is voltooid, mag een stijging in een of meer van de prijsbepalende factoren (zulks ter beoordeling van Georg Fischer) worden<br />
doorberekend aan Wederpartij. Betaling van de prijsverhoging vindt plaats tegelijk met de betaling van de hoofdsom of de laatste<br />
termijn.<br />
5.4. Indien echter de verhoogde prijs die Georg Fischer wenst te hanteren als bedoeld in artikel 5.3 ten opzichte van de oorspronkelijke<br />
prijs meer dan vijftien procent (15%) is gestegen, is Wederpartij gerechtigd om de Overeenkomst voor zover het toekomstige<br />
verplichtingen van Georg Fischer betreft, op te zeggen binnen zeven (7) dagen na aanzegging van de prijswijziging, met dien verstande<br />
dat Georg Fischer in dat geval onder geen beding jegens Wederpartij gehouden zal zijn om de als gevolg daarvan eventueel door<br />
Wederpartij geleden schade te vergoeden.<br />
6. Betaling<br />
6.1. Terzake de door Georg Fischer te leveren c.q. geleverde Goederen en/of door Georg Fischer uit te voeren c.q. uitgevoerde<br />
Diensten wordt door Georg Fischer een factuur gestuurd naar Wederpartij.<br />
6.2. Betaling dient te geschieden binnen dertig (30) dagen na factuurdatum, tenzij Schriftelijk anders is overeengekomen. Betaling dient<br />
te geschieden op door Georg Fischer aangegeven bankrekeningen. Bepalend voor het moment van betaling is het moment waarop<br />
Georg Fischer bericht van haar bank betreffende de bijschrijving van het betreffende bedrag heeft ontvangen.<br />
6.3. Indien betaling van een factuur niet volledig binnen de gestelde termijn heeft plaatsgevonden, is Wederpartij terstond, zonder dat<br />
een nadere ingebrekestelling is vereist, van rechtswege in verzuim en is vanaf de datum na de vervaldatum van de betreffende factuur<br />
een rente verschuldigd van 2% per maand (tenzij de wettelijke handelsrente hoger is, in welk geval die rente van toepassing is), waarbij<br />
een deel van een maand geldt als hele maand. Voorts komen dan alle buitengerechtelijke incassokosten ten laste van Wederpartij,<br />
welke kosten hierbij door Partijen bij voorbaat wordt vastgesteld op tenminste 15% van de openstaande vordering met een minimum<br />
van € 150,-, onverminderd de bevoegdheid van Georg Fischer om de werkelijke buitengerechtelijke kosten te vorderen indien deze<br />
meer bedragen.<br />
6.4. Indien Wederpartij in verzuim is met de betaling van enige factuur als bedoeld in artikel 6.3, zijn ook alle overige openstaande<br />
facturen terstond opeisbaar, zonder dat daarvoor een nadere ingebrekestelling vereist is.<br />
6.5. Door Wederpartij gedane betalingen strekken respectievelijk ter afdoening van verschuldigde kosten, rente en vervolgens van<br />
opeisbare facturen die het langst openstaan, ook indien Wederpartij bij de betaling vermeldt dat de betaling betrekking heeft op een<br />
andere factuur.<br />
6.6. Onverminderd bepalingen van dwingend recht, heeft de Wederpartij niet het recht zijn betalingsverplichtingen jegens Georg<br />
Fischer op te schorten en/of te verrekenen met betalingsverplichtingen van Georg Fischer jegens Wederpartij.<br />
6.7. Georg Fischer is gerechtigd alle vorderingen op Wederpartij te verrekenen met iedere schuld die Georg Fischer aan Wederpartij,<br />
dan wel aan met Wederpartij gelieerde (rechts-)personen, mocht hebben.<br />
6.8. Georg Fischer is, op basis van haar inschatting van de kredietwaardigheid van Wederpartij, te allen tijde gerechtigd voor het<br />
nakomen van opeisbare en niet-opeisbare betalingsverplichtingen zekerheidsstelling of gehele of gedeeltelijke vooruitbetaling te<br />
verlangen. Indien en zolang Wederpartij met de verlangde zekerheidstelling of gehele of gedeeltelijke vooruitbetaling in gebreke blijft is<br />
Georg Fischer bevoegd haar leveringsplicht op te schorten.<br />
6.9. Alle vorderingen van Georg Fischer op de Wederpartij zijn onmiddellijk opeisbaar in de navolgende gevallen:<br />
(a) indien na het sluiten van de Overeenkomst aan Georg Fischer omstandigheden ter kennis komen die haar goede grond geven te<br />
vrezen dat de Wederpartij niet aan zijn verplichtingen zal voldoen, zulks geheel ter beoordeling van Georg Fischer;<br />
(b) indien Georg Fischer de Wederpartij bij het sluiten van de Overeenkomst gevraagd heeft zekerheid te stellen voor de nakoming als<br />
bedoeld in artikel 6.8 en deze zekerheid uitblijft dan wel onvoldoende is;<br />
(c) In geval van het aanvragen van faillissement of surseance van betaling van Wederpartij, liquidatie of faillissement van Wederpartij<br />
of – voor zover Wederpartij een natuurlijke persoon betreft – het op Wederpartij van toepassing worden van de Wet Schuldsanering<br />
Natuurlijke Personen (WSNP).<br />
7. (Op)levertijd<br />
7.1. De door Georg Fischer in het kader van een Overeenkomst opgegeven (op)levertijd betreft altijd een indicatie en geldt derhalve<br />
nimmer als fatale termijn, tenzij tussen Partijen Schriftelijk uitdrukkelijk anders is bepaald. Overschrijding van de overeengekomen (op)<br />
levertijd geeft in geen geval recht op schadevergoeding.<br />
7.2. De door Georg Fischer opgegeven (op)levertijd gaat in wanneer over alle (technische) details overeenstemming is bereikt, alle<br />
noodzakelijke gegevens en dergelijke in het bezit zijn van Georg Fischer en aan alle noodzakelijke voorwaarden voor uitvoering van de<br />
Overeenkomst is voldaan.<br />
7.3. Bij vaststelling van de (op)levertijd gaat Georg Fischer er vanuit dat zij de opdracht kan uitvoeren onder de omstandigheden zoals<br />
die waren ten tijde van het sluiten van de Overeenkomst.<br />
7.4. Als er sprake is van andere omstandigheden dan die welke Georg Fischer bekend waren ten tijde van het sluiten van de<br />
Overeenkomst, kan Georg Fischer de (op)levertijd verlengen met de tijd die nodig is om de Overeenkomst onder de gewijzigde<br />
omstandigheden uit te voeren. Als de werkzaamheden als gevolg daarvan niet in de planning van Georg Fischer kunnen worden<br />
ingepast, zullen deze worden uitgevoerd/afgerond zodra de planning van Georg Fischer dit toelaat.<br />
7.5. Als er sprake is van opschorting van verplichtingen door Georg Fischer wegens een tekortkoming van Wederpartij wordt de (op)<br />
levertijd verlengd met de duur van de opschorting. Als de werkzaamheden als gevolg daarvan niet in de planning van Georg Fischer<br />
kunnen worden ingepast, zullen deze worden uitgevoerd/afgerond zodra de planning van Georg Fischer dit toelaat.<br />
7.6. Georg Fischer is na overschrijding van een overeengekomen leveringstermijn, dan wel de leveringstermijn na verlenging op grond<br />
van de artikelen 7.4 en 7.5 van deze Voorwaarden, terzake Goederen alleen dan in verzuim indien zij van Wederpartij een Schriftelijke<br />
ingebrekestelling heeft ontvangen, waarin haar een termijn van één (1) maand wordt gegeven om te leveren en nakoming daarvan<br />
ook binnen deze termijn uitblijft. Wederpartij heeft ingeval van ontbinding geen recht op schadevergoeding, tenzij de overschrijding<br />
van de laatstgenoemde termijn het gevolg is van opzet c.q. grove schuld van de directie van Georg Fischer en/of haar leidinggevende<br />
ondergeschikten.<br />
8. Wijze van levering<br />
8.1. Alle leveringen door Georg Fischer in Nederland geschieden DDP (zoals opgenomen in de meeste recente versie van ICC<br />
Incoterms), tenzij in de Overeenkomst expliciet anders is overeengekomen. Leveringen buiten Nederland geschieden in beginsel<br />
Ex Works (zoals opgenomen in de meeste recente versie van ICC Incoterms), tenzij in de Overeenkomst expliciet anders is<br />
overeengekomen. Na levering rust het risico van de Producten bij Wederpartij<br />
8.2. Het door Georg Fischer aan Wederpartij ter aflevering aanbieden van bestelde Goederen wordt gelijk gesteld met levering van<br />
deze Goederen. Indien Wederpartij weigert de ter aflevering aangeboden Goederen in ontvangst te nemen, zal Georg Fischer de<br />
betreffende Goederen gedurende vijftien (15) werkdagen na de datum van aanbieding opslaan op een door haar te bepalen locatie<br />
voor risico van Wederpartij. Na het verstrijken van deze termijn is Georg Fischer niet langer verplicht om de door Wederpartij bestelde<br />
Goederen ter beschikking van Wederpartij te houden en is zij gerechtigd om de Goederen aan een derde te verkopen of anderszins<br />
daarover te beschikken. Wederpartij blijft niettemin gehouden de Overeenkomst na te komen door de betreffende Goederen op eerste<br />
verzoek van Georg Fischer af te nemen tegen de overeengekomen prijs, terwijl Wederpartij tevens verplicht is de schade van Georg<br />
Fischer te vergoeden die voortvloeit uit de eerdere weigering van Wederpartij om de betreffende Goederen in ontvangst te nemen,<br />
waaronder begrepen opslag- en transportkosten.<br />
9. Eigendomsvoorbehoud en pandrecht<br />
9.1. Alle geleverde Goederen blijven uitsluitend eigendom van Georg Fischer tot aan het moment waarop Wederpartij aan alle<br />
verplichtingen – voortvloeiende uit of samenhangend met een Overeenkomst(en), waaronder begrepen vorderingen terzake van boete,<br />
rente en kosten – voldaan heeft. Tot dat tijdstip is Wederpartij gehouden de door Georg Fischer geleverde Goederen gescheiden van<br />
andere zaken en duidelijk geïdentificeerd als Georg Fischer-eigendom te bewaren en deugdelijk te verzekeren en verzekerd te houden.<br />
9.2. In het geval van een levering van Goederen aan een Wederpartij op een ander grondgebied dan Nederland, dan geldt ten aanzien<br />
van de betreffende Goederen – indien en zodra zij zich op het grondgebied van het betreffende land bevinden – in aanvulling op het in<br />
artikel 9.1 vermeld eigendomsvoorbehoud naar Nederlands recht tevens een eigendomsvoorbehoud zoals vermeld in artikel 9.1 naar<br />
het recht van het betreffende land, met dien verstande dat ten aanzien van de Overeenkomst voor het overige bij uitsluiting Nederlands<br />
recht van toepassing is als vermeld in artikel 17.<br />
9.3. Zolang er op geleverde Goederen een eigendomsvoorbehoud rust, mag Wederpartij deze buiten haar normale bedrijfsuitoefening<br />
niet bezwaren of vervreemden.<br />
9.4. Nadat Georg Fischer haar eigendomsvoorbehoud heeft ingeroepen mag zij de geleverde Goederen terughalen. Wederpartij staat<br />
Georg Fischer toe de plaats te betreden waar de Goederen zich bevinden.<br />
9.5. Als Georg Fischer geen beroep kan doen op haar eigendomsvoorbehoud omdat de geleverde Goederen zijn vermengd, vervormd<br />
of nagetrokken, is Wederpartij verplicht de nieuw gevormde zaken aan Georg Fischer te verpanden of te verhypothekeren.<br />
9.6. Het in dit artikel bedoelde eigendomsvoorbehoud is niet van toepassing indien de vordering van Georg Fischer op de Wederpartij<br />
(als bedoeld in artikel 9.1 van deze Voorwaarden) door Georg Fischer is verzekerd bij een kredietverzekeraar en deze verzekering ten<br />
aanzien van de gehele vordering op Wederpartij dekking biedt. Indien de kredietverzekeraar slechts dekking biedt voor een gedeelte<br />
van de vordering op de Wederpartij is voor het restant onverkort sprake van een eigendomsvoorbehoud.<br />
10. Acceptatie en garantie<br />
10.1. De geleverde Goederen en verrichte Diensten zullen in ieder geval na uitvoering van de verplichtingen uit de Overeenkomst<br />
door Georg Fischer binnen een redelijke termijn (zijnde niet langer dan drie (3) dagen na (op)levering) door Wederpartij aan een<br />
acceptatietest worden onderworpen. Indien Wederpartij niet binnen de voornoemde redelijke termijn na (op)levering Schriftelijk<br />
gebreken heeft gemeld aan Georg Fischer, dan wordt geacht dat de geleverde Goederen en verrichte Diensten door Wederpartij zijn<br />
aanvaard en voldoen aan de in de Overeenkomst neergelegde eisen en prestaties. Geringe afwijkingen met de gebruikelijke toleranties<br />
zijn voor Wederpartij geen grond voor reclamering.<br />
10.2. Andere niet bij de (op)levering zichtbare gebreken aan geleverde Goederen en/of verrichte Diensten moeten binnen drie (3)<br />
dagen na ontdekking danwel nadat zij redelijkerwijs te ontdekken waren, Schriftelijk en gemotiveerd aan Georg Fischer worden gemeld,<br />
bij gebreke waarvan wordt geacht dat de geleverde Goederen en verrichte Diensten door Wederpartij zijn aanvaard en voldoen aan de<br />
in de Overeenkomst neergelegde eisen en prestaties. Geringe afwijkingen met de gebruikelijke toleranties zijn voor Wederpartij geen<br />
grond voor reclamering.<br />
10.3. Na het ontdekken van enig gebrek als bedoeld in artikel 10.1 en 10.2 is Wederpartij verplicht om het gebruik, de bewerking,<br />
verwerking of installatie van de betreffende Producten onmiddellijk te staken en zal zij alle door Georg Fischer voor onderzoek van het<br />
gebrek gewenste medewerking verlenen onder meer door Georg Fischer in de gelegenheid te stellen ter plaatse een onderzoek in te<br />
(doen) stellen naar de omstandigheden van bewerking, verwerking, installatie en/of gebruik.<br />
10.4. Als Partijen geen overeenstemming bereiken over de vraag of er sprake is van een gebrek, dan wordt een onafhankelijke<br />
deskundige ingeschakeld. De deskundige wordt in overleg met Wederpartij aangewezen door Georg Fischer. De kosten hiervoor<br />
komen voor rekening van de (grotendeels) in het ongelijk gestelde partij, tenzij anders is overeengekomen.<br />
10.5. Klachten van welke aard dan ook ten aanzien van de uitvoering door Georg Fischer van een Overeenkomst, schorten de<br />
betalingsverplichting van Wederpartij niet op en kunnen slechts Schriftelijk ter kennis van Georg Fischer worden gebracht.<br />
10.6. Op Georg Fischer rust geen enkele verplichting met betrekking tot een ingediende vordering indien Wederpartij niet aan al zijn<br />
verplichtingen jegens Georg Fischer (zowel financieel als anderszins) tijdig en volledig heeft voldaan.<br />
10.7. Een vordering betreffende een door Georg Fischer geleverd Goed en/of verrichte Dienst kan geen invloed hebben op eerder<br />
geleverde of nog te leveren Goederen en/of Diensten, ook niet indien deze te leveren Goederen en/of Diensten zijn of zullen worden<br />
verricht ter uitvoering van dezelfde Overeenkomst.<br />
11. Garantie<br />
11.1. Op door Georg Fischer geleverde Goederen wordt aan Wederpartij uitsluitend garantie verleend voorzover dat schriftelijk tussen<br />
Partijen is overeengekomen.<br />
11.2. Georg Fischer verleent twaalf (12) maanden (bij verkoop en levering op de plaats waar de Producten direct worden verwerkt c.q.<br />
ingebouwd) of achttien (18) maanden (bij verkoop aan wederverkopers) na levering van de Producten garantie voor materiaal- en/of<br />
fabricagefouten. De garantie van Georg Fischer houdt in dat zij voor haar rekening de fouten herstelt of – ter beoordeling van Georg<br />
Fischer – het geleverde geheel of gedeeltelijk terugnemen en door een nieuwe levering vervangen. Indien Georg Fischer ter voldoening<br />
aan haar garantieverplichting (onderdelen van) geleverde Producten vervangen, worden de vervangen (onderdelen van) producten<br />
haar eigendom. Alle kosten, die uitgaan boven de hiervoor vermelde omschreven verplichting, zijn voor rekening van Wederpartij,<br />
zoals onder meer transportkosten, reiskosten en kosten van demontage en montage. Ingeval Georg Fischer ter uitvoering van haar<br />
garantieverplichtingen reparatieactiviteiten aan geleverde Producten verrichten, blijven de desbetreffende producten volledig voor risico<br />
van Wederpartij.<br />
11.3. Georg Fischer is niet gehouden tot het verlenen van de in artikel 11.2 bedoelde garantie indien:<br />
(a) de gebreken aan de Producten het gevolg zijn van onoordeelkundig gebruik of van andere oorzaken dan ondeugdelijkheid van<br />
materiaal of fabricage van de Producten;<br />
(b) na goedkeuring van Wederpartij Georg Fischer gebruikte Producten (zijnde niet nieuw gefabriceerde Producten) levert aan<br />
Wederpartij en/of in de te leveren Producten materiaal is verwerkt dat niet nieuw is c.q. eerder is gebruikt. Deze goedkeuring kan onder<br />
meer blijken uit de Overeenkomst;<br />
(c) de oorzaak van het gebrek niet kan worden gevonden;<br />
(d) indien niet alle voor het gebruik van de Producten gegeven instructies en andere specifiek geldende garantievoorschriften stipt en<br />
volledig zijn nagekomen;<br />
(e) het fouten betreft die geheel of gedeeltelijk het gevolg zijn van overheidsvoorschriften met betrekking tot de kwaliteit of de aard der<br />
gebruikte materialen of met betrekking tot de fabricage;<br />
(f) Wederpartij op eigen initiatief gedurende de garantietermijn wijzigingen en/of reparaties aan de geleverde Producten verricht of<br />
(heeft) laat (laten) verrichten;<br />
(g) Wederpartij niet aan al zijn verplichtingen jegens Georg Fischer (zowel financieel als anderszins) tijdig en volledig heeft voldaan;<br />
(h) de producten zich niet (meer) in Nederland bevinden.<br />
12. Vervaltermijnen<br />
12.1. Rechtsvorderingen en andere bevoegdheden van Wederpartij, uit welke hoofde ook, jegens Georg Fischer in verband met<br />
geleverde Goederen en/of verleende Diensten vervallen na twaalf (12) maanden na de datum waarop Wederpartij bekend werd of<br />
redelijkerwijs bekend kon zijn met het bestaan van deze rechten en bevoegdheden, doch uit dien hoofde voor het verstrijken van deze<br />
termijn géén Schriftelijke claim is neergelegd bij Georg Fischer.<br />
12.2. In het geval binnen de in artikel 12.1 vermelde termijn door Wederpartij een Schriftelijke claim is neergelegd bij Georg Fischer in<br />
verband met door haar geleverde Goederen en/of verleende Diensten vervalt iedere rechtsvordering dienaangaande van Wederpartij<br />
eveneens indien Georg Fischer niet binnen een termijn van vier (4) maanden na het ontvangen van de betreffende Schriftelijke claim in<br />
rechte is betrokken bij de op grond van artikel 18 van de Voorwaarden bevoegde rechter.<br />
12.3. De in artikel 12.1 en 12.2 genoemde termijnen zijn vervaltermijnen en kunnen niet door de Wederpartij worden gestuit.<br />
13. Ontbinding en annulering<br />
13.1. Ingeval Wederpartij een of enige van zijn verplichtingen uit hoofde van de Overeenkomst niet of deels niet nakomt, is Wederpartij<br />
van rechtswege in verzuim en heeft Georg Fischer het recht de Overeenkomst, zonder nadere ingebrekestelling en zonder rechterlijke<br />
tussenkomst, eenzijdig geheel of gedeeltelijk te ontbinden door middel van een Schriftelijke kennisgeving aan Wederpartij en/of haar<br />
verplichtingen uit hoofde van de Overeenkomst op te schorten, zonder dat Georg Fischer tot enige schadevergoeding is gehouden en<br />
onverminderd eventuele aan Georg Fischer toekomende rechten, waaronder begrepen het recht op volledige schadevergoeding. Alle<br />
vorderingen die Georg Fischer in deze gevallen op Wederpartij mocht hebben of verkrijgen, zullen terstond en ten volle opeisbaar zijn.<br />
13.2. Ingeval van faillissement, surséance van betaling, stillegging, liquidatie of overname of enige daarmee te vergelijken toestand<br />
van de onderneming van Wederpartij of als Wederpartij zijn onderneming staakt of als op een aanmerkelijk deel van het vermogen van<br />
Wederpartij beslag wordt gelegd of als Wederpartij niet langer moet worden geacht de verplichtingen uit de Overeenkomst na te kunnen<br />
komen, is Wederpartij van rechtswege in verzuim en heeft Georg Fischer het recht de Overeenkomst zonder nadere ingebrekestelling<br />
en zonder rechterlijke tussenkomst eenzijdig door middel van een Schriftelijke kennisgeving geheel of gedeeltelijk te ontbinden, zonder<br />
dat Georg Fischer tot enige schadevergoeding is gehouden en onverminderd haar verdere rechten, waaronder begrepen het recht van<br />
Georg Fischer op volledige schadevergoeding.<br />
13.3. Wederpartij is slechts gerechtigd om een bestelling bij Georg Fischer te annuleren als Georg Fischer met die annulering instemt.<br />
Indien Georg Fischer instemt met de annulering dan is Wederpartij gehouden om de reeds gemaakte kosten (zoals door Georg Fischer<br />
ingekochte materialen en eventueel reeds uitgevoerde werkzaamheden) aan Georg Fischer te vergoeden, vermeerderd met een<br />
vergoeding voor winstderving ten bedrage van 15% van de totale overeengekomen prijs.<br />
14. Aansprakelijkheid en verzekering<br />
14.1. Georg Fischer is aansprakelijk voor directe schade die Wederpartij lijdt en die het gevolg is van een aan Georg Fischer toe te<br />
rekenen tekortkoming in de nakoming van de Overeenkomst. Voor vergoeding komt echter alleen in aanmerking die schade waartegen<br />
Georg Fischer verzekerd is, dan wel redelijkerwijs verzekerd had behoren te zijn – gegeven de aard van de onderneming van Georg<br />
Fischer en de markt waarin zij opereert – en slechts tot het bedrag dat de verzekeraar in voorkomend geval uitkeert.<br />
14.2. Niet voor vergoeding in aanmerking komt:<br />
(a) vermogensschade, zoals - doch niet beperkt tot - bedrijfsschade, gevolgschade, vertragingsschade en gederfde winst;<br />
(b) opzichtschade, waaronder onder andere wordt verstaan schade die door of tijdens de uitvoering van het werk wordt toegebracht<br />
aan zaken waaraan wordt gewerkt of aan zaken die zich bevinden in de nabijheid van de plaats waar wordt gewerkt (Wederpartij dient<br />
zich desgewenst tegen deze schade behoorlijk te verzekeren);<br />
(c) schade ontstaan door handelen of nalaten van Wederpartij of derden in strijd met door Georg Fischer verstrekte instructies c.q. in<br />
strijd met de Overeenkomst en de Voorwaarden;<br />
(d) schade als direct gevolg van door of namens Wederpartij aan Georg Fischer verstrekte onjuiste, onvolledige en/of ondeugdelijke<br />
informatie.<br />
14.3. Indien:<br />
(a) het voor Georg Fischer ten tijde van het aangaan van de overeenkomst niet of niet tegen redelijke condities mogelijk is een<br />
verzekering als bedoeld in lid 1 af te sluiten of daarna tegen redelijke condities te verlengen;<br />
(b) de verzekeraar niet tot uitkering van de betreffende schade overgaat;<br />
(c) de betreffende schade niet door de verzekering is gedekt,<br />
is de vergoeding van de schade beperkt tot het bedrag dat door Georg Fischer voor de onderhavige overeenkomst (exclusief BTW)<br />
met Wederpartij is overeengekomen, welke bedrag te allen tijde is gemaximeerd op € 25.000 exclusief btw. Indien de Overeenkomst<br />
een duurovereenkomst is, wordt de aansprakelijkheid beperkt tot een bedrag gelijk aan 3 maal het totaalbedrag dat in het kader van de<br />
opdracht in de laatste 6 maanden vóór het ontstaan van de schade van Wederpartij exclusief BTW is bedongen, welke bedrag te allen<br />
tijde is gemaximeerd op € 25.000 exclusief btw.<br />
14.4. Wederpartij vrijwaart Georg Fischer van alle aanspraken van derden wegens schade opgetreden door of in verband met door<br />
Georg Fischer verrichte Diensten en/of geleverde Goederen, voor zover Georg Fischer jegens Wederpartij voor dergelijke schade ook<br />
niet aansprakelijk zou zijn.<br />
15. Overmacht<br />
15.1. Onder overmacht wordt verstaan een tekortkoming in de nakoming van een Overeenkomst die niet aan Georg Fischer kan<br />
worden toegerekend.<br />
15.2. Onder overmacht als bedoeld in artikel 14.1 wordt in ieder geval – derhalve niet uitsluitend – begrepen een tekortkoming als<br />
gevolg van (a) problemen bij en/of ernstige verstoringen van het productieproces bij toeleveranciers, waaronder nutsbedrijven,<br />
(b) het niet leveren van noodzakelijke materialen door derden, (c) opzet of grove schuld van hulppersonen, (d) werkstaking,<br />
(e) bovenmatig ziekteverzuim van het personeel van Georg Fischer, (f) brand, (g) bijzondere weersomstandigheden (zoals<br />
overstromingen), (h) overheidsmaatregelen (zowel nationaal als op internationaal niveau), waaronder in- en uitvoerverboden en<br />
in- en uitvoerbelemmeringen, (i) oorlog, mobilisatie, onlusten, oproer, staat van beleg, (j) sabotage, (k) vervoersstremmingen, (l)<br />
machinebreuk en/of (m) transportvertraging.<br />
15.3. In geval van overmacht heeft Georg Fischer de keuze hetzij de uitvoering van de Overeenkomst op te schorten totdat de<br />
overmachtsituatie heeft opgehouden te bestaan, hetzij de Overeenkomst, al dan niet na aanvankelijk voor opschorting te hebben<br />
gekozen, geheel gedeeltelijk te ontbinden. Wederpartij heeft in beide gevallen geen recht op enige schadevergoeding. Indien de<br />
periode waarin door de overmacht nakoming van de verplichtingen door Georg Fischer onmogelijk is langer duurt dan dertig (30)<br />
dagen, is ook Wederpartij bevoegd de Overeenkomst gedeeltelijk (voor de toekomst) te ontbinden, met dien verstande dat Georg<br />
Fischer conform artikel 14.4 gerechtigd is voor de reeds verrichte werkzaamheden een factuur te sturen. Bij gedeeltelijke ontbinding<br />
bestaat geen verplichting tot vergoeding van de (eventuele) schade.<br />
15.4. Indien Georg Fischer bij het intreden van de overmacht al gedeeltelijk aan haar verplichtingen heeft voldaan of slechts gedeeltelijk<br />
aan haar verplichtingen kan voldoen, is zij gerechtigd dat gedeelte afzonderlijk te factureren en is Wederpartij gehouden deze factuur te<br />
voldoen als betrof het een afzonderlijke Overeenkomst.<br />
16. Geheimhouding<br />
16.1. Beide Partijen zijn verplicht tot geheimhouding van alle vertrouwelijke informatie die zij in het kader van hun Overeenkomst van<br />
elkaar of uit andere bron hebben verkregen. Informatie geldt als vertrouwelijk als dit door een Partij is medegedeeld of als dit voortvloeit<br />
uit de aard van de informatie.<br />
16.2. Indien, op grond van een wettelijke bepaling of een rechterlijke uitspraak, Georg Fischer gehouden is vertrouwelijke informatie<br />
aan door de wet of de bevoegde rechter aangewezen derden mede te verstrekken, en Georg Fischer zich ter zake niet kan beroepen<br />
op een wettelijk dan wel door de bevoegde rechter erkend of toegestaan recht van verschoning, dan is Georg Fischer niet gehouden tot<br />
schadevergoeding of schadeloosstelling en is Wederpartij niet gerechtigd tot ontbinding van de Overeenkomst.<br />
17. Intellectuele eigendomsrechten<br />
Alle (intellectuele en industriële) eigendomsrechten, waaronder maar niet beperkt tot auteursrechten en databankrechten, op alle<br />
Goederen en/of de resultaten van Diensten waaronder maar niet beperkt tot kopij, modellen, tekeningen, ontwerpen, documentatie,<br />
fotografische opnamen, films, informatiedragers, apparatuur en programmatuur (in object- en broncode), gegevens en databestanden,<br />
mallen en matrijzen, welke onderwerp zijn van en/of voortvloeien uit en/of gebruikt zijn bij de nakoming van de verplichtingen uit de<br />
Overeenkomst tussen Georg Fischer en Wederpartij berusten bij Georg Fischer. Indien voormelde rechten niet bij Georg Fischer<br />
berusten is Wederpartij gehouden op eerste verzoek elke medewerking aan overdracht van het desbetreffende recht aan Georg<br />
Fischer te verlenen.<br />
18. Toepasselijk recht en bevoegde rechter<br />
18.1. Op alle door Georg Fischer gesloten Overeenkomsten is uitsluitend Nederlands recht van toepassing.<br />
18.2. Alle geschillen tussen Partijen worden uitsluitend beslecht door de Rechtbank Overijssel, locatie Zwolle.<br />
59
Georg Fischer N.V.<br />
Contactinformatie<br />
Georg Fischer N.V.<br />
Lange Veenteweg 19, 8161 PA Epe<br />
Postbus 35, 8160 AA Epe<br />
Telefoon: 0578 - 678222<br />
Faxnummer: 0578 - 621768<br />
E-mail: nl.ps@georgfischer.com<br />
Internet: www.georgfischer.nl<br />
De technische gegevens zijn niet bindend en bieden geen garantie ten aanzien van de<br />
producteigen schappen. Ze zijn onderhevig aan wijzigingen. Raadpleeg onze Algemene<br />
leveringsvoorwaarden.<br />
www.georgfischer.nl<br />
<strong>Prijslijst</strong> <strong>COOL</strong>-<strong>FIT</strong> <strong>4.0</strong> <strong>2020</strong> (01.20)<br />
© Georg Fischer N.V.<br />
<strong>NL</strong> 8161 PA - 19 Epe<br />
60