Water filters Profine catalog
We are a wholesale supplier of products, solutions and services in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers. A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
We are a wholesale supplier of products, solutions and services in water treatment.
We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.
A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
* Inlet water quality
* Required flow rate
* Inlet water pressure
* Filter use (continuous or intermittent)
• Filter dimensions: HxD (mm.) SMALL 269x87,4(mm.) - 10,59”x3,44"(In.)
• Filter dimensions: HxD (mm.) MEDIUM 384x87,4(mm.) - 15,11”x3,44"(In.)
• Filter dimensions: HxD (mm.) LARGE 529x87,4(mm.) - 20,82”x3,44"(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement).
• Activation: it is advisable to run water through filter at maximum pressure and full flow rate, for at least 5
minutes to allow air purging and flushing of cartridge.
• Filters change: When capacity is reached, or when flow comes too slow (precipitates under 0.7bar/10psi),
every 6 months but at least annually.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before and after the system. Systems certified for the contaminants reduction may be used with disinfected
water that may contain filterable pollutants. All systems must be maintained according to producer
instructions.
Note: The contaminants or other substances removed or reduced by this drinking water system are not
necessarily in your water.
Code: 04400105
Profine ARSENIC antimicrobial carbon block 0,5 micron water
filters
Features
Flow rate mod. Small:
Flow rate mod. Medium:
Flow rate mod. Large:
Working pressure:
Temperature Rating:
Service life mod. Small:
Service life mod. Medium:
Service life mod. Large:
Variants
0,26 gpm (1L/min)
0,39 gpm (1,5L/min)
0,53 gpm (2L/min)
8,7 - 87 psi (0,6 - 6 bar)
40 - 100°F (4,4 - 37,8°C)
2.376 gallons (9.000L) max. 1 year
3.564 gallons (13.500L) max. 1 year
5.280 gallons (20.000L) max. 1 year
Code
Description
04400105-01 Profine ARSENIC small antimicrobial replacement filter 9.000lt. - 1lt./min 0,5 micron (6)
04400105-02 Profine ARSENIC medium antimicrobial replacement filter 13.500lt. - 1,5lt./min 0,5 micron (6)
04400105-03 Profine ARSENIC large antimicrobial replacement filter 20.000lt. - 2lt./min 0,5 micron (6)
Reduces concentration of arsenic in drinking water. Carbon block filtration with antimicrobial 0.5 micron and
selective resin for arsenic, mixed with active carbon.
Profine® ARSENIC remove odor and taste. The disposable filter is made of with extruded carbon block
technology and silver for a bacteriostatic action.
Removes taste and odor, chlorine, dirt, rust, suspended material not visible to the naked eye, mold and
algae. Reduction arsenic (type "III" trivalent and "V" pentavalent) if higher than to the limits of potability.
Composite structure filter suitable for the treatment of drinking water. Resin compliant to the NSF 61 and
WRAS standards, the remaining components in contact with water compliant to DM 174/2004.
14 January 2020 12/20