TST brochure / english language

TST 80W CABLE WINCH
THE HARVESTER HEAD FROM TST
WITH THE UNIQUE FEEDING SYSTEM
TECHNICAL DATA TST 80W CABLE WINCH
Pulling force max.
Drum inner side/outer side
Line speed gear #1
Drum inner side/outer side
Line speed gear #1
Drum inner side/outer side
80 kN/40,4 kN
ca. 0,9 m/sek. |
1,8 m/sek.
ca. 1,8 m/sek. |
3,6 m/sek.
Operating pressure 280 bar (max. 320)
Necessary oil quantity
150 l/min
Wire ropes max. 300 m ø 12
Rope max. 250 m ø 13
Weight without wire rope
1124 lbs
ROBUST, LIGHTWEIGHT AND SIMPLE TO USE
Extension arm and quick-hitch on mobile
excavator with TST 60H Timbernator
TECHNICAL DATA TST 60 H TIMBERNATOR
Maximum diameter for felling:
27.5 inch
Timbernator convinces through its rigid construction,
large tilt angle and immense feeding force.
The grapple opens to a maximum of 50 inches and
can cope with any challenge. The long chain belt
ensures a high feed rate with low contact pressure
and friction – resulting in great delimbing performance
of small – to large diameter timber.
Maximum feeding force:
Feed Speed
Max. grapple opening:
Delimbing knives
Recommended drive power
P max.:
Oil volume:
Weight:
60 kN
0 – 4 m / sec.
51 inch
2 - 25 inch
110 kW |150 PS
5100 psi
from 220 l/min
approx.
2870 lbs
The arrangement of the grapples simplifies the
work on hard and twisted timber, the large tilt angle
facilitates work on steep slopes.
Thanks to a sophisticated hydraulic system, Timbernator
can be controlled by most well-known
harvester control systems. But Timbernator is also
an independent harvester head which can process
timber with a diameter of 2 - 25 inch.
The maximum diameter for felling is 27.5 inch.