Weidmueller Heavy Duty Connectors

Coding
Coding system with guiding function
If you have more than six connectors of similar type to code,
you need coding pins and coding sockets.
Replace all M3 fastening screws of an insert by two coding
pins and two coding sockets. You then fit two coding
pins and two coding sockets to the mating insert, in a
complementary arrangement.
Fit coding pins to the other connectors in the same way, but
with a different arrangement. The coding diagram illustrates
the system.
RockStar ® accessories
Ordering data DSTV
For fixed-pole inserts
Type Qty. Order No.
DSTV COST4 100 1471300000
DSTV COBU5 100 1471500000
Coding arrangement for coding pins
M F M F M F M F
Cod. socket 5 mm dia
Cod. pin 4 mm dia
Plan to have four coding pins and four coding sockets for
each connector.
M F M F M F M F
M F M F M F M F
M F M F M F M F
Ordering data HDC CM
For ModuPlug metal frames
Type Qty. Order No.
HDC CM
100 1202660000
GUIDING PIN
HDC CM
GUIDING SOCKET
100 1202670000
I
Cod. socket 5 mm dia
Cod. pin 4 mm dia
Plan to have four coding pins and four coding sockets for
each connector.
2028800000
I.11