Weidmueller Heavy Duty Connectors

More documents

Recommendations

Info

HVE series – exciting voltage RockStar® ® inserts Einsätze HVE series – exciting voltage Weidmüller high-voltage inserts are equipped with lagging contacts. This results in more security during real operations. B Technical data Standards/approvals Standards DIN EN 61984 DIN EN 60664-1 Approvals UL/CSA** Inserts No. of poles 3 + 2, 6 + 2, 10 + 2 Rated voltage 830 V Rated voltage to UL/CSA 600 V Rated current 20 A Rated impulse withstand voltage 8 kV Pollution severity 3 (1000 V / 8 kV / 2) Insulation resistance ≥ 1010 Ω Material Glass-fibre reinforced PC (in UL list and approved for railway applications) Temperature range –40 °C to +125 °C Flammability to UL 94 V-0 Mechanical service life – Plugging cycles Ag - Surface ≥ 500 Contact resistance ≤ 2 mΩ Contacts/Material Contacts Copper alloy Surface Passivated silver Clamping range/Stripping length – Screw connection 0.5 – 2.5 mm2 (AWG 20 – 14) / 8 mm – Tension clamp connection 0.25 – 2.5 mm2 (AWG 24 – 14) / 8 mm Clamping torque – Screw connection 0.5 – 0.55 Nm SD blades – Screw connection 0.6 x 3.5 oder PZ0 – Tension clamp connection 0.5 x 3 oder 0.6 x 3.5 PE connection – Clamping range 0.5 – 4 mm 2 – solid/stranded 0.5 – 4 mm 2 / 0.5 – 4 mm 2 – flexible/flexible with wire end ferrule, DIN 46228 pt. 1 0.5 – 4 mm 2 / 0.5 – 4 mm 2 – AWG conductor AWG 20 – 12 – Stripping length 10 mm – Clamping torque 1.2 – 1.5 Nm – Blade dimensions SD 0.8 x 4 mm oder PZ1 Note: When used properly and as designated, the listed connectors may not be connected or disconnected if there is a live voltage or load! Rated voltage determined on the basis of DIN EN 61984 section 6.19.2.2. 500 V for signal contact. ** For screw connection B.80 2028800000
HVE series – exciting voltage RockStar® ® inserts Einsätze B Overview Size Rated voltage Rated current No. of poles Tension clamp connection TOP connection Screw conn. with wire guard spring Crimp connection PUSH IN connection Page 4 830 V 20 A 3 + 2 + h • • B.82 6 830 V 20 A 6 + 2 + h • • B.84 8 830 V 20 A 10 + 2 + h • • B.86 2028800000 B.81
Page 1:
Heavy-duty connectors Catalogue 201
Page 5 and 6:
RockStar ® - Heavy Duty Connectors
Page 7 and 8:
Product overview RockStar ® - Heav
Page 9 and 10:
Contents Overview Overview Construc
Page 11 and 12:
Overview Part codes for inserts HDC
Page 13 and 14:
Overview Overview of sizes 2, 5, 7,
Page 15 and 16:
Overview Overview A S4 S4/0 S6/12 S
Page 17 and 18:
Overview A 2028800000 A.9
Page 19 and 20:
Overview Overview of sizes 3, 4, 6,
Page 21 and 22:
Technical data Overview An overview
Page 23 and 24:
Technical data Overview of crimp co
Page 25 and 26:
Technical data Tightening torques a
Page 27 and 28:
Overview Housing IP68 Overview A Th
Page 29 and 30:
Overview Part codes for housings IP
Page 31 and 32:
Overview Part codes for housings IP
Page 33 and 34:
Overview Panel cut-out Housings IP6
Page 35 and 36:
Technical data Influencing factors:
Page 37 and 38:
Technical data Overview The deratin
Page 39 and 40:
Technical data Overview In order to
Page 41 and 42:
Technical data IP classes of protec
Page 43 and 44:
Technical data Chemical resistance
Page 45 and 46:
Contents RockStar ® inserts RockSt
Page 47 and 48:
Introduction Consistency One plasti
Page 49 and 50:
HA series - the slim connectors Roc
Page 51 and 52:
HA series - the slim connectors Hou
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
HE series - the universal connector
Page 65 and 66:
Page 67 and 68:
a a HE series - the universal conne
Page 69 and 70:
Page 71 and 72:
Page 73 and 74: HE series - the universal connector
Page 75 and 76: HE series - the universal connector
Page 77 and 78: HEE series - high contact density R
Page 79 and 80: HEE series - high contact density H
Page 81 and 82: a a HEE series - high contact densi
Page 85 and 86: HEEE series - high contact density
Page 91 and 92: HD series - the flexible connectors
Page 93 and 94: a b HD series - the flexible connec
Page 95 and 96: a b HD series - the flexible connec
Page 111 and 112: HDD series - the compact connectors
Page 123: HDD series - the compact connectors
Page 127 and 128: HVE series - exciting voltage Housi
Page 133 and 134: HSB series - the heavy-duty connect
Page 139 and 140: HQ series - the powerful little con
Page 153 and 154: MixMate series - the high-capacity
Page 175 and 176:
MixMate series - the high-capacity
Page 177 and 178:
Contents RockStar ® ModuPlug modul
Page 179 and 180:
Introduction Secure The round and r
Page 181 and 182:
RockStar ® ModuPlug modular system
Page 183 and 184:
RockStar ® ModuPlug base module Si
Page 185 and 186:
RockStar ® ModuPlug modules ModuPl
Page 187 and 188:
ModuPlug ® HDC MHE 6P Technical da
Page 189 and 190:
ModuPlug ® HDC MHE 8 Technical dat
Page 191 and 192:
ModuPlug ® HDC MHD 36 Technical da
Page 193 and 194:
RockStar ® ModuPlug modules ModuPl
Page 195 and 196:
RockStar ® ModuPlug modular system
Page 197 and 198:
RockStar ® ModuPlug data inserts C
Page 199 and 200:
Contents RockStar ® HighPower Rock
Page 201 and 202:
Introduction Practical and universa
Page 203 and 204:
RockStar ® HighPower 250 A RockSta
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
RockStar ® Housings IP65 / NEMA Ty
Page 217 and 218:
Reliable Guaranteed protection agai
Page 219 and 220:
Plastic housing Size 1 Base Bulkhea
Page 221 and 222:
Metal housing Size 1 Base Bulkhead
Page 223 and 224:
Die cast zinc housing (EMC) Size HQ
Page 225 and 226:
End locking, lower side Size 2 Base
Page 227 and 228:
End locking, lower side Size 3 Base
Page 229 and 230:
a a Side locking, lower side Size 4
Page 231 and 232:
5 a Side locking, upper side Size 4
Page 233 and 234:
End locking, lower side Size 5 Hood
Page 235 and 236:
Side locking, lower side Size 6 Bas
Page 237 and 238:
Side locking, upper side Size 6 Hoo
Page 239 and 240:
Side locking, upper side Size 7 Hoo
Page 241 and 242:
Side locking, lower side Size 8 Bas
Page 243 and 244:
5 End locking, lower side Size 8 Ba
Page 245 and 246:
Central-locking clamp Size 8 Hood P
Page 247 and 248:
Side locking, lower side Size 10 Ho
Page 249 and 250:
Side locking, upper side Size 10 Ho
Page 251 and 252:
Contents RockStar ® Housings IP68
Page 253 and 254:
Introduction Practical Laser labell
Page 255 and 256:
6 RockStar ® Housings IP68 / EMC S
Page 257 and 258:
6 RockStar ® Housings IP68 / EMC S
Page 259 and 260:
RockStar ® Housings IP68 / EMC Scr
Page 261 and 262:
Contents RockStar ® Data Connector
Page 263 and 264:
b IE-LINE Variant 5 RockStar ® hea
Page 265 and 266:
IE-LINE Variant 5 RJ45 plug inserts
Page 267 and 268:
IE-LINE Variant 5 RJ45 flange inser
Page 269 and 270:
Contents RockStar ® Kits RockStar
Page 271 and 272:
Introduction RockStar ® Kits Easy
Page 273 and 274:
Kits with HA inserts, 3 pole 400 V,
Page 275 and 276:
Kits with HA inserts, 4 pole 400 V,
Page 277 and 278:
Kits with HE inserts, 6 pole 500 V,
Page 279 and 280:
Kits with HE inserts, 6-pole, PUSH
Page 281 and 282:
Kits with HE inserts, 10 pole 500 V
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Contents RockStar ® accessories Ro
Page 299 and 300:
Introduction Secure Solid, machined
Page 301 and 302:
Crimp contacts Crimp contacts for f
Page 303 and 304:
Crimp contacts Technical data Mater
Page 305 and 306:
Fibre optic contacts Instructions f
Page 307 and 308:
Coding Coding system with guiding f
Page 309 and 310:
Coding HE coding pin Use the HE cod
Page 311 and 312:
Shield lever Shield lever for stand
Page 313 and 314:
Shield lever RockStar ® accessorie
Page 315 and 316:
Other accessories HDC GRIP PANEL Te
Page 317 and 318:
D E F Other accessories HDC screw a
Page 319 and 320:
Other accessories Profile seals Gas
Page 321 and 322:
Content Tools Tools Tools Cutting J
Page 323 and 324:
Crimping Crimping tools for other c
Page 325 and 326:
Crimping MTR 160 Cross-section Code
Page 327 and 328:
Crimping Crimping tools for HighPow
Page 329 and 330:
Crimping HTX-HDC/POF POF crimping C
Page 331 and 332:
Screwdrivers VDE-insulated torque s
Page 333 and 334:
Screwdrivers Uninsulated screwdrive
Page 335 and 336:
Screwdrivers Weidmüller wrench set
Page 337 and 338:
Miscellaneous Removal Tool CM3, HD
Page 339 and 340:
Inhalt Cable entries Cable entries
Page 341 and 342:
Introduction You should always obse
Page 343 and 344:
Standard cable glands - Plastic Cab
Page 345 and 346:
Standard cable glands - Brass Cable
Page 347 and 348:
Standard cable glands - Brass Cable
Page 349 and 350:
EMC cable glands Cable glands - Bra
Page 351 and 352:
EMC cable glands Cable glands - bra
Page 353 and 354:
Standard cable glands - Stainless s
Page 355 and 356:
Accessories - Flat IP washer Flat I
Page 357 and 358:
Accessories - Flat IP washer Flat I
Page 359 and 360:
Sealing plugs Sealing plugs - Plast
Page 361 and 362:
Sealing plugs Sealing plugs - Plast
Page 363 and 364:
Contents Service and support Servic
Page 365 and 366:
Service and support Professional ad
Page 367 and 368:
Service and support Product selecti
Page 369 and 370:
Contents Index Index Index Index Ty
Page 371 and 372:
Type Order No. Page Type Order No.
Page 373 and 374:
Type Order No. Page Type Order No.
Page 375 and 376:
XIndex / Type 2028800000 X.7
Page 377 and 378:
Order No. Type Page Order No. Type
Page 379 and 380:
Order No. Type Page Order No. Type
Page 381 and 382:
Order No. Type Page 9020400000 PB L
Page 383 and 384:
Let’s connect. KR Korea Weidmulle
Page 386:
Weidmüller - Your partner in Indus
show all

Weidmueller Heavy Duty Connectors

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?