Weidmueller Heavy Duty Connectors
HVE series – exciting voltage RockStar® ® inserts Einsätze HVE series – exciting voltage Weidmüller high-voltage inserts are equipped with lagging contacts. This results in more security during real operations. B Technical data Standards/approvals Standards DIN EN 61984 DIN EN 60664-1 Approvals UL/CSA** Inserts No. of poles 3 + 2, 6 + 2, 10 + 2 Rated voltage 830 V Rated voltage to UL/CSA 600 V Rated current 20 A Rated impulse withstand voltage 8 kV Pollution severity 3 (1000 V / 8 kV / 2) Insulation resistance ≥ 1010 Ω Material Glass-fibre reinforced PC (in UL list and approved for railway applications) Temperature range –40 °C to +125 °C Flammability to UL 94 V-0 Mechanical service life – Plugging cycles Ag - Surface ≥ 500 Contact resistance ≤ 2 mΩ Contacts/Material Contacts Copper alloy Surface Passivated silver Clamping range/Stripping length – Screw connection 0.5 – 2.5 mm2 (AWG 20 – 14) / 8 mm – Tension clamp connection 0.25 – 2.5 mm2 (AWG 24 – 14) / 8 mm Clamping torque – Screw connection 0.5 – 0.55 Nm SD blades – Screw connection 0.6 x 3.5 oder PZ0 – Tension clamp connection 0.5 x 3 oder 0.6 x 3.5 PE connection – Clamping range 0.5 – 4 mm 2 – solid/stranded 0.5 – 4 mm 2 / 0.5 – 4 mm 2 – flexible/flexible with wire end ferrule, DIN 46228 pt. 1 0.5 – 4 mm 2 / 0.5 – 4 mm 2 – AWG conductor AWG 20 – 12 – Stripping length 10 mm – Clamping torque 1.2 – 1.5 Nm – Blade dimensions SD 0.8 x 4 mm oder PZ1 Note: When used properly and as designated, the listed connectors may not be connected or disconnected if there is a live voltage or load! Rated voltage determined on the basis of DIN EN 61984 section 6.19.2.2. 500 V for signal contact. ** For screw connection B.80 2028800000
HVE series – exciting voltage RockStar® ® inserts Einsätze B Overview Size Rated voltage Rated current No. of poles Tension clamp connection TOP connection Screw conn. with wire guard spring Crimp connection PUSH IN connection Page 4 830 V 20 A 3 + 2 + h • • B.82 6 830 V 20 A 6 + 2 + h • • B.84 8 830 V 20 A 10 + 2 + h • • B.86 2028800000 B.81
- Page 73 and 74: HE series - the universal connector
- Page 75 and 76: HE series - the universal connector
- Page 77 and 78: HEE series - high contact density R
- Page 79 and 80: HEE series - high contact density H
- Page 81 and 82: a a HEE series - high contact densi
- Page 83 and 84: HEE series - high contact density H
- Page 85 and 86: HEEE series - high contact density
- Page 87 and 88: HEE series - high contact density H
- Page 89 and 90: HEE series - high contact density H
- Page 91 and 92: HD series - the flexible connectors
- Page 93 and 94: a b HD series - the flexible connec
- Page 95 and 96: a b HD series - the flexible connec
- Page 97 and 98: HD series - the flexible connectors
- Page 99 and 100: HD series - the flexible connectors
- Page 101 and 102: HD series - the flexible connectors
- Page 103 and 104: HD series - the flexible connectors
- Page 105 and 106: HD series - the flexible connectors
- Page 107 and 108: HD series - the flexible connectors
- Page 109 and 110: HD series - the flexible connectors
- Page 111 and 112: HDD series - the compact connectors
- Page 113 and 114: HDD series - the compact connectors
- Page 115 and 116: HDD series - the compact connectors
- Page 117 and 118: HDD series - the compact connectors
- Page 119 and 120: HDD series - the compact connectors
- Page 121 and 122: HDD series - the compact connectors
- Page 123: HDD series - the compact connectors
- Page 127 and 128: HVE series - exciting voltage Housi
- Page 129 and 130: HVE series - exciting voltage Housi
- Page 131 and 132: HVE series - exciting voltage Housi
- Page 133 and 134: HSB series - the heavy-duty connect
- Page 135 and 136: HSB series - the heavy-duty connect
- Page 137 and 138: HSB series - the heavy-duty connect
- Page 139 and 140: HQ series - the powerful little con
- Page 141 and 142: HQ series - the powerful little con
- Page 143 and 144: HQ series - the powerful little con
- Page 145 and 146: HQ series - the powerful little con
- Page 147 and 148: HQ series - the powerful little con
- Page 149 and 150: HQ series - the powerful little con
- Page 151 and 152: HQ series - the powerful little con
- Page 153 and 154: MixMate series - the high-capacity
- Page 155 and 156: MixMate series - the high-capacity
- Page 157 and 158: MixMate series - the high-capacity
- Page 159 and 160: MixMate series - the high-capacity
- Page 161 and 162: MixMate series - the high-capacity
- Page 163 and 164: MixMate series - the high-capacity
- Page 165 and 166: MixMate series - the high-capacity
- Page 167 and 168: MixMate series - the high-capacity
- Page 169 and 170: MixMate series - the high-capacity
- Page 171 and 172: MixMate series - the high-capacity
- Page 173 and 174: MixMate series - the high-capacity
HVE series – exciting voltage<br />
RockStar® ® inserts Einsätze<br />
HVE series – exciting voltage<br />
Weidmüller high-voltage inserts are equipped with lagging<br />
contacts. This results in more security during real operations.<br />
B<br />
Technical data<br />
Standards/approvals<br />
Standards DIN EN 61984<br />
DIN EN 60664-1<br />
Approvals<br />
UL/CSA**<br />
Inserts<br />
No. of poles 3 + 2, 6 + 2, 10 + 2<br />
Rated voltage<br />
830 V<br />
Rated voltage to UL/CSA<br />
600 V<br />
Rated current<br />
20 A<br />
Rated impulse withstand voltage<br />
8 kV<br />
Pollution severity 3 (1000 V / 8 kV / 2)<br />
Insulation resistance<br />
≥ 1010 Ω<br />
Material<br />
Glass-fibre reinforced PC (in UL list and approved for<br />
railway applications)<br />
Temperature range –40 °C to +125 °C<br />
Flammability to UL 94 V-0<br />
Mechanical service life<br />
– Plugging cycles Ag - Surface ≥ 500<br />
Contact resistance<br />
≤ 2 mΩ<br />
Contacts/Material<br />
Contacts<br />
Copper alloy<br />
Surface<br />
Passivated silver<br />
Clamping range/Stripping length<br />
– Screw connection 0.5 – 2.5 mm2 (AWG 20 – 14) / 8 mm<br />
– Tension clamp connection 0.25 – 2.5 mm2 (AWG 24 – 14) / 8 mm<br />
Clamping torque<br />
– Screw connection 0.5 – 0.55 Nm<br />
SD blades<br />
– Screw connection 0.6 x 3.5 oder PZ0<br />
– Tension clamp connection 0.5 x 3 oder 0.6 x 3.5<br />
PE connection<br />
– Clamping range 0.5 – 4 mm 2<br />
– solid/stranded 0.5 – 4 mm 2 / 0.5 – 4 mm 2<br />
– flexible/flexible with<br />
wire end ferrule, DIN 46228 pt. 1 0.5 – 4 mm 2 / 0.5 – 4 mm 2<br />
– AWG conductor AWG 20 – 12<br />
– Stripping length 10 mm<br />
– Clamping torque 1.2 – 1.5 Nm<br />
– Blade dimensions SD 0.8 x 4 mm oder PZ1<br />
Note:<br />
When used properly and as designated, the listed connectors may not be connected or disconnected if there is a live voltage or<br />
load! Rated voltage determined on the basis of DIN EN 61984 section 6.19.2.2.<br />
500 V for signal contact.<br />
** For screw connection<br />
B.80 2028800000