Weidmueller Enclosures & Cable Glands

Introduction
Drawing design – For chapter C
Enclosures
The drawings contained in chapter C are constructed in the
following way.
To identify the enclosure side views, these are marked
with the letters A, B, C, D, E, and F. The schematic 3D
representations shown underneath are of an enclosure that
has been wall mounted.
F shows the view of the enclosure lid (front aspect),
E shows the interior surface of the enclosure (rear wall of the
enclosure with the cover removed).
A shows the view of the enclosure from above and
B the view of the enclosure from underneath.
C shows the left and
D the right side of the enclosure.
E is the front view of the enclosure interior with the cover
removed (enclosure rear wall).
C
You can find the dimensions of the enclosure sides for all
enclosure sizes in each drawing.
A = Top
B = Bottom
C = Left
D = Right
E = Enclosure rear wall
F = Enclosure lid
2031180000
C.11