productronica Guide 2019

HALL 4A / BOOTH 466
Advertorial
The Next Generation of UV
Cure Conformal Coatings
Electrolube will be launching a range
of next generation UV cure conformal
coating products at Productronica
Munich 2019 Hall 4A, stand 466.
The exciting new UVCL range has been
developed to meet the various requirements
of electronics, LED and automotive
manufacturers, with the additional benefit
of rapidly increasing production time and
offering even higher levels of performance.
The new UV Cure range will be showcased
in Hall 4A, stand 466, where Electrolube’s
senior technical team will be available to
discuss the advantages and specifications
of the new UV cure coating range.
The UVCL range is solvent-free, VOC-free
and provides unsurpassed performance in
harsh environments. The range offers excellent
resistance to cracking during thermal
shock cycling, improved moisture resistance
including salt mist and exceptional
edge coverage even on sharp components.
The main benefit of Electrolube’s UV
Cure coatings however is that boards can
be handled immediately, with full cure guaranteed
within 6–12 hours due to the chemical
secondary cure mechanism. In comparison
to existing UV cure systems on the
UVCLP being applied using selective coating
machine PVA Delta 4
market, the majority require minimum
moisture secondary cure times of 8–14+
days, whereas the new UVCL range facilitates
tremendous reductions in the amount
of Work In Progress.
Electrolube
Ashby Park,
Coalfield Way,
Ashby de la Zouch
Leicestershire
LE65 1JR
UNITED KINGDOM
Tel: +44 (0)1530 41960
Fax: +44 (0)1530 416640
International Tel:
+44 (0)2079 980200
International Fax:
+44 (0)2079 980300
E-mail: info@electrolube.com
EPP productronica Guide 2019 21