TITAN TTL530GBC PETROL MULTI TOOL 61145
TITAN TTL530GBC PETROL MULTI TOOL USER MANUAL
TITAN TTL530GBC PETROL MULTI TOOL USER MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2). Put the backing flange(27) on the spindle(26).<br />
3). Fit the cutting blade(28) on the spindle(26). The direction of rotation indicated on the<br />
guard must match the one on the cutting blade. Ensure that the cutting blade sits firmly<br />
on the extruded ring on the backing flange(27).<br />
4). Put the blade protect cover(30) on the blade(28).<br />
5). Secure the blade(28) with the blade protect cover(30) and the nut(29) removed<br />
earlier(Fig.8).<br />
25<br />
26<br />
27<br />
28<br />
Fig.8<br />
30<br />
29<br />
Installing spool assembly<br />
1). Make sure that the safety guard assembly(25) has been attached properly.<br />
2). Put the backing flange(27) on the spindle(26) then screw the cutting spool(33) onto<br />
it(Fig.9).<br />
25<br />
26<br />
27<br />
33<br />
Mixing and filling fuel<br />
Fig.9<br />
WARNING! This petrol brush cutter is not supplied with fuel in the engine!<br />
Before operating this petrol brush cutter it is essential to fill in fuel!<br />
WARNING! Fuel and oil are highly inflammable! Fumes will explode if lit!
Change language