TITAN TTL530GBC PETROL MULTI TOOL 61145

2. Assembling shaft.
1). Align the lower shaft(7) with the clamp(11) so that the hole in the shaft is orientated to the
locking pin(10)(Fig.4).
7
11
Fig.4
2). Pull out the locking pin(10) and insert the lower shaft(7) into the clamp(11). Release the
locking pin(10) and ensure it engages in the hole(Fig.5).
7
10
11
10
Fig.5
3). Secure the connection by tightening the locking knob(9) clockwise
(Fig.6).
Fig.6
9
3. Assembling safety guard.
1). Place the safety guard assmebly(25) onto the fixed plate(31) and fix it with the screws. Pay
attention to the alignment of the guard(Fig.7).
31
25
Fig.7
4. Installing cutting blade
1). Make sure that the safety guard assmebly(25) has been attached properly and
the screws have been removed from the outer edge.
43CC PETROL BRUSH CUTTER TTL530GBC