Multione K series

K SERIES
“BIG BLOCK”

COMPLIANT WITH
STAGE V AND
TIER 4 FINAL
EMISSION STANDARDS
A clean Engine
Multione is pleased to announce the new K Series:
a consistent improvement on the existing range
with the latest Stage V and Tier 4 Final emission
compliant engine.
The new Kubota D1305 - 3 cylinders - 1,3 lt. meet the
emission requirement for UE and US without hassle
of electronic controls or any exhaust treatment.
The particular Multione setup make the engine
deliver high torque at low revs giving many
advantages to Multione hydraulic controls and
circuits with a smooth, reactive and consistent
power output.
Torque (Nm)
1400 1600 1700 1800 2000 2200 2400
Yanmar 3TNV76 57 60 62 64 65 64 62
Torque output increase comparing to Yanmar
engine on previous models.
Kubota D1305 83 84 85 84 83 81 78
Yanmar 3TNV76
Kubota D1305
90
85
85 Nn @ 1700 rpm
Torque Curve
TORQUE (Nm)
80
75
70
65
60
55
50
45
+30%
65 Nn @ 2000 rpm
40
35
30
1400 1600 1700 1800 2000 2200 2400 2500
ENGINE RPM

New Models 5.3 K 6.3+ K 6.3S K 6.3SD K 7.2 K
BIG BLOCK ENGINE
HIGH TORQUE
HIGH OIL FLOW
LOW EMISSION
LOW NOISES
A Big Block engine
The new Multione K Series equipped with
Big Block engine assures the best working
experience.
This is the largest engine into a compact mini
loader available in the market.
The new configuration offers:
- 30 % more torque
- 20% more flow output for the attachments
This mean much more power when it is needed,
a smooth and constant power delivery at low
rpm and the best attachments performance.
More Efficiency
The new K Series Multione is powered by a 1300
cc 3 cylinder liquid cooled Kubota engine,
which run at only 2500 rpm and deliver 25 hp
and 85 Nm of torque at 1700 rpm.
All this turn into better efficiency, less fuel
consumption and longer engine life; the
machine is quieter, too.
The torque peak at low revs mean the ability to
work with attachments with just a bit of throttle.
New Models 4.2 K 5.2 K
4.2 K and 5.2 K: STAGE V - Tier 4 Final
Both Multione models receive the Stage V and
Tier4 Final emission compliant engine. Both new
series receive an improved transmission pump with
smooth control and larger flow output, that provide
faster travel speed.
The 20 and 25 hp engines are under Multione
specifications with a setup to increase the torque
output.

Model 5.3 K 6.3+ K 6.3S K 6.3SD K 7.2 K
Engine
Displacement
Torque
Power (Iso Gross)
Fuel
Kubota D1305, 3 cyl.
1,261 l (76.95 cu/in)
85 Nm @ 1700 rpm
25 HP @ 2500 rpm
Diesel
Transmission
Drive speed (max.) ( 1 )
12,5 km/h
7.7 mph
Hydrostatic, 4WD with direct drive wheel motors
9 km/h
5.6 mph
12,5 km/h
7.7 mph
11,5 km/h
7.1 mph
9 km/h
5.6 mph
Aux. hydraulics oil flow 50 l/min - 13.2 GPM 40 l/min - 10.5 GPM
Max. lifting height
Tipping load, max ( 2 )
Lifting capacity straight ( 3 )
Lifting capacity fully
articulated ( 4 )
Pushing force (c)
Standard tires
(Tractor profile)
Weight
2,75 m
108 in
1140 kg
2513 lbs
900 kg
1984 lbs
740 kg
1631 lbs
900 kgf
900 kp
2,92 m
115 in
1200 kg
2646 lbs
960 kg
2116 lbs
780 kg
1720 lbs
1690 kgf
1690 kp
2,90 m
114 in
1500 kg
3307 lbs
1200 kg
2645 lbs
900 kg
1984 lbs
1000 kgf
1000 kp
2,90 m
114 in
1500 kg
3307 lbs
1200 kg
2645 lbs
1020 kg
2249 lbs
1690 kgf
1690 kp
23X10.50-12 23X8.50-12 23X8.50-12 23X10.50-12
1050 kg
2315 lbs
1430 kg
3153 lbs
1610 kg
3549 lbs
1610 kg
3549 lbs
Product Code C977038 C961015 C961020 C967010 C962025
( 1 ) Maximum speed that can be achieved with the largest diameter tires available, on a flat surface and machine without attachments.
( 2 ) Maximum load that can be lifted just off the ground when the machine is straight and with rear weights. Weight of attachment included.
( 3 ) Machine straight, with rear weights. Weight of attachment is included. (80% of tipping load).
( 4 ) Machine fully articulated, with rear weights. Weight of attachment is included.

“ I ran the new 5.3 K for about one year on
my own backyard where I use it for general
landscaping maintenance as well as for
“construction” applications.
I noted, comparing to previous Multione 5.3, a
very good operating feeling of the new K series
and the machine is even more nice and easy
to operate. The engine respond very reactively,
there is always plenty of torque to use both for
attachments and transmission.
I put the unit under severe load applications,
like a 1,5 m mulching mower, stump grinder,
hydraulic hammer, 130 cm flail mower, buckets,
power rake etc, in various temperatures and
conditions without be gentle on the controls.
The 5.3 K is smoother but strong, at same time.
The lower weight center of the engine give
more balance when lifting loads and the lowrevs
torque let you operate the unit with engine
running at 1800-1900 rpm, being capable of hit
the relief of the system without stall it.
The enhanced oil flow, from 40 to 50 l/min, give
at the attachments the extra speed and force
that increase the working speed and shortened
the time to do the job. Equipped with larger
26x12.00-12 tires has a great flotation and grip
on every surface and leave no-tracks or marks
on the ground.
The 5.3 K it is a “one of a kind” unit, no one
competitor offer a 1000 kg mini loader with
such flow and lifting capability. ”
Stefano

“ The Multione 6.3 K get a lots of benefit from the
engine upgrade. This unit combine compact
dimensions, frame robustness and good flow output,
it let you run any attachments.
The 6.3+K is, in my opinion, the best combination of
pushing force and speed. With the new Kubota 1.3
l engine you get more torque than before without
the need to speed up the engine with consequential
noise and fuel consumption.
The operator position is comfortable and the unit
perform very well on digging, climbing or just run
powered attachments. The solidity of the unit is
clear and you feel it when you drive the bucket into
the dirt.
Trenchers, tillers or augers really get lots of benefits
from the powerful engine, able to keep up on the
power demand of the auxiliary circuit. ”
Stefano

“ I operate the Multione 7.2 K on construction
job site where the lifting capacity does
really make the difference. With additional
backweight the unit handle 1000 kg load and
the engine well sustain the demand of the
transmission pump, which has been revised,
too.
The new 1.3 l Kubota engine deliver good
power and well support the transmission when
digging or bucket loading is required. The
unit has very good pushing force and engine
torque output a low rpm let you keep the
pushing force engaged as long as you need.
The smooth pump control give you the ability
to control the force output easy.
The 40 l/min output let your run motor-powered
attachments, like flails, sweeper, pressure
cleaner, etc, with good performances, even
if the unit has a simple and reliable 2 pumps
system. ”
Stefano

5.3 5.3 K K
1000 kg (2200 lbs) loader weight
Multi function joystick
50 l/min (13.2 GPM) output flow - Best in class
1300 cc displacement Kubota engine - Best in class
3 yrs Powertrain warranty - Best in class
Compact size
Stage V and Tier 4 Final emission compliant
Big tires available
Very versatile
7.2 7.2 K K
K SERIES
UNIQUE SELLING POINTS
6.3 6.3 K K
1200 kg (2446 lbs) lifting capacity
Integrated back-weight - Unique in the market
40 l/min (10.5 GPM) output flow - Best in class
Poclain direct drive wheel motors
3 yrs Powertrain Warranty - Best in class
Big tires available
Super strong frame and boom
Stage V and Tier 4 Final emission compliant
1300 cc displacement Kubota engine - Best in class
Fit in any application
1000 kg (2200 lbs) lifting capacity
Multi function joystick - Best in class
50 l/min (13.2 GPM) output flow - Best in class
1300 cc displacement Kubota engine - Best in class
3 yrs Powertrain Warranty - Best in class
Poclain direct drive wheel motors
Stage V and Tier 4 Final emission compliant
Big tires available
Very versatile
Super strong frame and boom
MultiOne srl
via Palù, 6/8
36040 Grumolo delle Abbadesse
Vicenza - Italy
www.multione.com