productcatalogue-EXPORT

EXPORT PRODUCTS

Welcome
We are based in Cumbria, in the Northwest of the UK, in 2015 founders Lawrence Harris and
Andrew Laird started WRS to offer innovative water rescue products to emergency
services. The main focus being on the inflatable boats market, with our first product being
the Swift Water Rescue Sled. Our vision is to develop products that centre round the
challenges of technical rescue teams both operationally and in allowance for training time
coupled with the changing requirement for Flood response in the urban environment.
Since our inception in 2015 we have expanded into the United States with our manufacturing
partners producing a range of 100% US made WRS products for the US rescue services.
For our European and World markets our South Korean Factory set very high standards on
quality. The range of fabrics we use allows us to select the most appropriate fabric for the
application with our product range using Hypalon, PVC, PU (TPU) and Neoprene.

Swift Water Rescue Sled
Features
•High Volume Bow and Rocker - The increased volume maintains
stability when loaded.
•Inflation and over pressure valves - Leafield valves are used and
are widely recognised as world leaders in valve
manufacturing.
•Low profile grab handles - Fitted with 15 low profile grab handles
•Airdeck hull - 9 psi inflatable hulls creating a firm base superb
shape, stiffness and form.
•3 Chambers - The sled is built with 3 separate inflatable chambers,
providing added security should one of the chamber become
compromised.
•3 Person craft – Capable of transporting 2 rescuers and 1 casualty.
Although the sled will float up-to 5 people successfully this
does affect its use in turbulent water.
•5 x Stainless Steel D rings - Marine grade 316 Large D Rings
located for easy access from within the sled whilst floating.
Dimensions
Length – 355 cm
Width – 122 cm
Weight - 26kg
Capacity – 350 kg
Chambers – 3
Working Pressure – 3.6 psi tubes , 9 psi floor
Valves – Leafield C7 x 3 with 3 PRV

CONNECTOR PADDLE
OVERVIEW
The only paddle designed for rescue use, this innovative product offers 3 easy to use products in 1.
Easy Use Kayak Paddle - No feather of the blades, so no need to learn how to use a standard kayak
paddle with wrist rotation. Both High Density Blades are flat allowing the paddle to be used any
way up "Easy use”.
Wade and Short Reach - Remove the Blades and connect the T -Grip and Wading Foot attachment.
Aluminium with plastic sheath gives the shaft grip and protection in cold conditions.
Extended Reach - With the use of the Extension Spigot, it is possible to join multiple shafts, with a
recommended maximum extension of 3 shafts to achieve 16ft (5m) reach.
Key Features
• Robust Kayak Paddle
• Wading Pole conversion kit
• Extended Reach conversion kit
• 16ft Reach when used with 3 shafts
• "Easy use" paddle to rescue training need
• Fits into WRS Rescue Sled (2018 model)

Evacuation Sled
Overview
Developed to address the need for a small craft capable of
evacuating flood victims from inside a building, both injured
and mobile. The Sled is fully inflatable with a working
pressure of 11 psi, creating a solid fully floating platform.
The unique design provides excellent protection to
passengers when being transported.
•High Pressure Drop Stitch - 2 inch TPU drop stitch fabric working
pressure 11psi.
•Folding Design – Use flat and folded , highly versatile for multiple
application and effective patient loading.
•Low profile grab handles - Fitted with 6 fabric grab handles
•Door Width - Fits through a standard residential doorway.
•Over pressure valve – Low profile over pressure valve, compatible
with compressed air inflation systems
•160kg load – When fully folded and water tight the Sled is able to
float up to 160kg.
Dimensions
Unfolded Length – 240cm
Unfolded Width – 110 cm
Folded Length – 180cm
Folded Width – 64cm
Weight - 7kg
Capacity (folded) – 160kg
Chambers – 1
Working Pressure – 11psi
Valves – Bayonet with PRV
REGISTERED DESIGN - 6039805

Rescue Raft 3.6, 4.0 and 4.2
Features
•Extra wide side tubes for stability - The Raft 3.6 is fitted
with stable 48cm diameter side tubes making it an ideal
rescue platform
•Removable Cross tubes – The option to remove the 2 cross
tubes allows space for the transport of victims in
stretchers, maintaining a low centre of gravity.
•Self Bailing or Sealed floor – As standard all rafts are fitted
with self bailing floors optional sealed floors for fowl
water flood evacuation can be fitted.
•I beam floor - Using the ribbed I beam floor to reduce risk
of foot entrapments found with drop stitch floors in
rafts.
•Over pressure valve – Fitted with overpressure valves on all
main chambers excluding cross tubes.
Dimensions
Length – 360cm , 400cm , 420cm
Width – 180 cm , 185cm, 210cm
Tube Diameter – 48cm ,52cm , 52cm
Weight - 55kg , 60kg , 65kg
Capacity – 600kg , 800kg, 1000kg
Chambers – 4 + Floor + 2 Cross tubes
Working Pressure – 3.6psi
Valves – Leafield C7 and PRV

Bags
Sled Pro Bag
Features
• Vented Base – Allows water to drain and air to circulate
• 4 rubberized carry handles - Positioned to make navigation to the water's edge
as easy as possible
• Hook and Loop quick close lid - We design our bags to have enough space for
easy packing and lid closure
• Webbing strap cross buckles - For added security we use webbing straps to
tighten down to the sled for transportation
• PVC Fabric - Easy to clean and hard wearing
IRB + Raft Bag
Features
• PVC/ Nylon Woven Fabric - Hard wearing fabric easy to clean also with hemmed
edge for long life.
• 4 rubberized carry handles - Positioned to make navigation to the water's edge
as easy as possible
• Webbing strap cross buckles - For added security we use webbing straps to
tighten down on to the sled for transportation
• Simple Design – Fits most IRB and Rafts.

Inflation Systems
HV Stirup Pump
Features
Our Rescue Pump has a 1" diameter x 6' long non-collapsible hose with either Leafield or
Bayonet Adaptor. Spare O-ring in the bottom of each pump cylinder.
Urethane reinforced base to increase durability. Foot plate and plunger disc are both
made out of high density polyethylene. Foot plate has two 1" cam strap holes for
securing pump.
SPEC
26.5" Tall, Volume: 220 cubic inch, Weighs: 6.5 lbs , 4:1 pump efficiency, 6 PSI Maximum
Pressure
Made in America
Compressed Air Inflation
Features
System will operate with either 200 or 300 Din Fittings. The inflation kit is set to maximum
9.0 -10 bar, comes fitted with 35” EN-250 hose assembly and Leafield screw fit valve
adaptor.
Prices Include storage bag and certificate of conformity

Rescue Wrap PFD
Features
ISO Approved. Professional cut with smooth lined styling.
Unique, patent pending, front-opening, wrap style PFD. Tough
ripstop 500d Cordura / 200d nylon shell. 90-110N of Gaia
environmentally friendly soft flotation foam. Super-strong,
single handed opening, side release buckles. Adjustable
shoulder straps with padded covers, Solas reflective panels,
gear clip and elastic loop for glow stick attachment. 40mm
side straps and 25mm waist strap. Front and back Velcro loop
identification attachment panels. Front and back Solas
reflective panels. Cavernous front pocket with safety
equipment and radio compartments. Knife and glove pockets.
All pockets have metal zip sliders, gear clips and sewn
drainage holes. Integrated shoulder, waist and adjustable
length harness system. 316 stainless steel ring. Removable /
adjustable leg straps. Split D rings for cowstail attachment.
Shoulder whistle clip. Rear lash tab.
SIZES: SM. LXL. XXL
COLOURS: RED / LIME

PREDATOR HELMETS
FULL CUT
CE approved. Offers excellent head and ear protection. Tough Ralvek®
thermoplastic shell. High impact EVA foam inner with custom fit pads and
rear adjustable cradle. Padding kit supplied.
SIZES: ONE SIZE (54-62cm)COLOURS: WHITE. RED. YELLOW
CENTRE
CE approved. Offers excellent head protection. Tough Ralvek® thermoplastic
shell. High impact EVA foam inner with rear adjustable cradle and removable
pad kit. Sizes marked clearly on the back of each helmet for ease of
allocation.
SIZES: XS (51-57cm) SM (53-59cm) LXL (57-63cm)COLOURS: WHITE
FREERIDE FR7W
CE approved. Great looking low profile shape. Provides optimal protection to
the key areas. Constructed from high impact Ralvek® thermoplastic for a
stiffer, safer shell. Detachable ear covers. High impact EVA foam inner with
custom fit pads and rear adjustable cradle.
SIZES: SM (52-58cm) LXL (54-60cm)COLOURS: BLUE. RED. ORANGE

THROW BAGS
THROW BAG
Tough 600d polyester / nylon ripstop shell with a buoyant foam insert. Quick
draining and drying slotted base. Full length webbing reinforced design that
runs through a bombproof 5mm x 40mm marine grade 316 stainless steel
ring - the friction free link between the rope and the rescue. 9.5mm floating
polypropylene rope with tensile strength of 7.5kN with a fig 8 knot tied (or
10kN without). Reflective piping. Stiffened wide opening for easy packing.
Easy and tidy cam buckle open / closure system. Comfortable handle for
packing and throwing. Webbing loops to compliment our Guide Belt.
SIZES: 15M. 20M. 25M, COLOURS: BLUE
GUIDE BELT
Compliments our Throwline range. Quick release belt for those who need
their bag close to hand.
COLOURS: BLACK
RESCUE TAPE
5m of super strong 20mm tubular webbing. Bartacked karabiner loops at
each end. Fits neatly into our PFD pockets. Great on the sea and river.
SIZE: 5M , COLOURS: LIME

Inflatable Repairs -Workshop
WRS Service Centre located in Preston is our in-house repair and service centre
for all types of inflatable products. Offering professional repairs and
customisation using Hypalon, PVC and PU fabrics. Our services range from
boat fabric cleaning to specialist one off projects
• IRB, SIB and RIB Damage Repairs
• Sled and Raft Repairs
• Annual Service and Cleaning
• Drop Stitch Repairs to Pathways
• Logo service on all fabric types
• Valve Repair/ Replacement
• D ring and Handle Repair/ Replacement
TEL – 01524 220224 OPTION 2
EMAIL – SERVICE@WATERRESCUESYSTEMS.COM
WEB – WWW.WRS-SERVICECENTRE.CO.UK

REGISTERED OFFICE
WATER RESCUE SYSTEMS LTD
NEWHOLME
BRIGSTEER ROAD
LEVENS
CUMBRIA
TEL – 0044 (0)1524 220224 OPTION 1
EMAIL – LAWRENCE@WATERRESCUESYSTEMS.COM
WEB – WWW.WATERRESCUESYSTEMS.COM
DELIVERIES AND REPAIRS
WATER RESCUE SYSTEMS LTD
UNIT A67 RED SCAR BUSINESS PARK
LONGRIDGE ROAD
PRESTON
PR2 5NE
TEL – 01524 220224 OPTION 2
EMAIL – SERVICE@WATERRESCUESYSTEMS.COM
WEB – WWW.WRS-SERVICECENTRE.CO.UK