The LINOS Profile and Rail Systems - Qioptiq Q-Shop

Microbench Nanobench Tube System C Positioners
186
Rail System FLS 25, Introduction
Rail System FLS 25
The result of continuous further
development in the field of mechanical
systems for microoptic applications is the
mounted rail system FLS 25. With this
system, linear and planar structures can
be realized and mounted optics with a
diameter of 16 mm directly taken into a
carrier. The compatibility with the LINOS
Nanobench system enables the application
of a large number of structure
components like mirror and prism
adjusters, positioning units and fiber
adapters. The optical axis of the total
system is 20 mm above the work surface.
System dimensions
Rail FLS 25
Selection guide
The LINOS flat rail systems 25 and
40 are directly compatible to
Nanobench and Microbench and
can be easily combined.
Please find further information in
our brochure "Microbench, Bench
and Rail systems" for download at
www.linos.com.
The profile with its high degree of
straightness and low torsion also has a
high degree of levelness due to the
precise processing of all guide and
bearing surfaces. The black anodized rail
profile has elongated holes so that it can
be attached to work surfaces with metric
or inch standard threads as well as
independent of the pattern. The rail FLS
25 is available in lengths of 50 mm to
500 mm.
US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500
Carrier FLR 25
The carrier FLR 25 serves for direct
integration of mounted optics with a
diameter of 16 mm. The carrier is also
equipped with four borings in a 16 mm
pattern. These serve to hold the rods of
the Nanobench and are therefore the
interface to this system. A large number
of different structure components of the
Nanobench system can be mounted on
the rail. A spring-mounted lever fixes the
carrier on the rail. When the knurled
head screw is loosened, the carrier can
be moved easily and jerk-free due to the
spring tension. By tightening the knurled
screw, the carrier can be arrested in a
position.