engine driven trash pump

Diesel trash pump has good performance and reliable
operation

Diesel trash pump water supply device includes: base, fuel tank, control box, diesel
engine, heat exchanger, water pump and shock absorber; the position and connection
relationship of each component is: the base with built-in fuel tank is fixedly installed on
the ground, control box The diesel engine and the water pump are installed on the base
through the shock absorber.

The control box is connected to the diesel engine and the water pump through the
control line. The diesel engine and the water pump are respectively connected to the
heat exchanger through the inner and outer circulating water pipes. The diesel engine
driven pump water supply device has small volume, good shock absorption effect, stable
operation and less environmental impact.

Trailer mounted pump are designed to handle a wide range of sensitive and corrosive
fluids at low to medium flow rates. For handling higher throughputs required by
chemicals, food, pharmaceuticals and related processes and industrial enterprises, diesel
pumps are non-metallic. The pump is required to adopt a new structure.

The diesel dewatering pump set conforms to the ANSI process pump standard and is
housed in a sealless mechanism and automatic starter. Diesel pumps have the ability to
dry run, have a unique segmented shaft structure, allow a length of 50 ft, these types
can be used in the food industry, diesel pump design and structure without metal
components contact fluid.

Engine driven water pump performance characteristics:
First, there are three perfect startup functions:
1, manual start function: through the transfer switch can complete manual, automatic
interlock and manual start function.
2. Automatic start function: Allow three starts. If the three starts are unsuccessful, the
“starting failure alarm” will be issued and the startup state will be automatically exited.
After a successful start, the rated load time will be 5-10-15s (depending on the unit
capacity). )

3. Emergency manual direct start function: When the automatic control device is faulty,
the emergency manual direct start function can be realized.
Second, automatic operation:
When the diesel engine irrigation pump receives fire protection information, if the
motor fire pump power supply system is powered off or the phase loss or electric
pump failure cannot be started normally, the diesel engine fire pump will automatically
start running, once the power supply system returns to normal or the electric pump
can run normally. When you switch to the electric pump automatically.

Third, automatic shutdown:
When the fire signal disappears, the diesel fire pump will automatically delay the
shutdown.
Fourth, the battery self-charging voltage regulation function:
The battery can be automatically charged by the commercial power supply for the
diesel engine charger to ensure the smooth start of the unit.

Five, with a complete indicator system:
Ready to start, manual start, automatic start, unit operation, unit shutdown, battery
charging, overspeed diesel engine oil pressure is too low, supercharger oil pressure is
too low, diesel engine oil temperature is too low, diesel engine cooling water
temperature is too high, The battery voltage is too low, the fuel oil level is too low (or
lacking), the diesel engine cooling water temperature is too low, and the temperature is
checked.

Sixth, with a sound alarm or protection system:
Three start failure alarms or protection, overspeed alarm or protection, low oil
pressure alarm or protection, supercharger oil pressure low alarm or protection,
cooling water temperature alarm or protection, low oil temperature alarm or
Protection, automatic charging device fault alarm, battery voltage low alarm, battery
voltage over alarm, oil level low alarm or protection.

Seven, with a sound reality system:
Diesel engine lubricating oil pressure, diesel engine speed, battery charging current,
battery charging voltage.

Eight, direct connection:
The direct coupling of the diesel engine and the water pump is connected with a
common channel steel base, which has a compact structure and good overall
performance. Less failure, less vibration, and convenient installation on site.

9. Wide range of equipment pressure and flow.