WORKHOLDING SYSTEMS

10.000/EN/09.11
Erwin Halder KG
Erwin-Halder-Straße 5-9
88480 Achstetten-Bronnen
Germany
+49 (0)7392 7009-0
� +49 (0)7392 7009-160
@ info@halder.com
� www.halder.com
The product range from Halder
Standard Parts
Soft-face Mallets
Workholding Systems
Aviation Products
Please ask for our actual product catalogues.
WORKHOLDING SYSTEMS
V 2
EN
WORKHOLDING SYSTEMS
www.halder.com

Table of Contents
An exciting range of services… 2 - 3
Contents 4 - 5
Pictorial index 6 - 14
Standard assortments 15 - 20
T-slot Systems V40/V70 21 - 54
Hole and Dowel Systems L12/L16 55 - 72
Combi Parts 73 - 74
Multiple Clamping Systems 75 - 79
Basic Elements 81 - 90
Zero-Point Clamping Systems 91 - 112
Standard Parts 113 - 133
A competent partner… 135 - 136
The complete product catalogues for Workholding Systems and Standard Parts
including CAD drawings in 2D and 3D are available on a DVD, or on-line at
www.halder.com
Our Soft-face mallets catalogue is also available on-line.
Page

2
www.halder.com
An exciting range of services…
…all from one supplier
In order to meet the rising market demand for precision
and flexibility, it is important to focus on the efficiency
of your production process. The right clamping solution
can be the basis for seamless production.
To meet this challenge it is important to have a partner
who, thanks to its long-standing experience and knowhow,
is able to provide the solutions you need.
Whether dedicated fixtures or highly flexible modular
systems, a modular zero-point clamping system or
individual combination elements, Halder offers the
best solution for almost every application.
We can design, manufacture and assemble a fixture
systems to match your specific requirements.
When your flexibility comes first, Halder is the partner
for you.

Modular Fixture Systems
The right thing for every purpose
Two systems that can be easily combined with one
another enable universal adaptation of jigs and fixtures
to the respective requirements.
The systems can be selected according to the workpiece
and production method involved, their modular design
enabling a maximum degree of flexibility.
The Halder T-slot System V40/V70
The T-slot system is based on hardened base plates
with a clearance between slots of 40 mm or 70 mm.
The system parts can be fixed and clamped
simultaneously, enabling faster set-up of jigs and fixtures.
Interlocking fixing and a high degree of flexibility in
setting-up make our slot system especially suited for
the machining of complicated workpieces.
The L12/L16 Hole and Dowel System
This hole and dowel system (Ø 12 F6/M12 and Ø 16
F6/M16) guarantees fast set-ups and precision
machining of simple workpiece geometries.
The base plates with hardened fixing holes (fitted
bushings) and coaxial threads are unlimited with respect
to their size.
Depending on the clamping situation, application is
either individual or in a combined system.
Combi Parts
Combine the advantages of the hole and dowel and
T-slot system.
Individualised customer service
We offer you the following services for the best
possible planning and realisation of your projects,
especially in the area of modular jig and fixture
systems:
- Sample set-ups of jigs and fixtures
- Service bus for demonstration on site
- Introductory and user seminars
- Training of customer employees at
the Halder Training Centre
www.halder.com
3

Summary " Contents
4 www.halder.com
page
T-slot Systems
EH 1000.400 -
EH 1000.500 Base Plates 22
EH 1000.800 Base Plates 23
EH 1002.100
EH 1100.300 -
Base Plates 23
EH 1100.500
EH 1100.700 -
Base Plates 24
EH 1103.500
EH 1101.300 -
Base Plates 25
EH 1101.500
EH 1102.100 -
Connecting Elements 26
EH 1102.200
EH 1104.300 -
Base Plates 26
EH 1104.500
EH 1104.700 -
Supporting Plates 27
EH 1104.900 Clamping Angles 28
EH 1105.200
EH 1105.800 -
Clamping Angles 29
EH 1105.900
EH 1007.400 -
Coverings 30
EH 1108.300
EH 1010.100 -
Spacers 30
EH 1110.100
EH 1010.200 -
Mounting Blocks 31
EH 1110.300
EH 1011.100 -
Mounting Blocks 31
EH 1111.300
EH 1111.700 -
Mounting Blocks 32
EH 1111.800
EH 1012.100 -
Intermediate Plates 32
EH 1112.400
EH 1112.600 -
Slotted Clamping Angles 33
EH 1112.800
EH 1013.600 -
Intermediate Elements 34
EH 1113.800
EH 1114.000 -
Clamping Bars 34
EH 1114.100
EH 1014.500 -
Support Clamping Bars 35
EH 1114.500 Stops 35
EH 1115.100
EH 1116.000 -
Cylindrical Stops 35
EH 1116.100
EH 1020.300 -
Stops 36
EH 1121.500
EH 1021.600 -
Thrust Angles 36
EH 1021.700
EH 1120.400 -
Thrust Angles 37
EH 1122.300
EH 1029.600 -
Thrust Angles 37
EH 1129.600
EH 1030.000 -
T-Slot Centering Blocks 38
EH 1030.300
EH 1130.400 -
T-Nuts 38
EH 1130.600
EH 1031.100 -
T-Blocks 39
EH 1131.200
EH 1131.500 -
T-Clamping Blocks 39
EH 1131.700
EH 1032.100 -
T-Clamping Blocks 39
EH 1132.100
EH 1132.500 -
Wrenches 40
EH 1132.800 Butt Straps 40
EH 1132.900
EH 1133.000 -
Clamping Heads 41
EH 1133.200 Clamping Bars 41
EH 1137.300 Clamping Vices 41
EH 1137.400 Clamping Vices 42
EH 1138.100 Clamping Vices 42
EH 1138.400
EH 1139.400 -
Clamping Vices 42
EH 1139.500
EH 1040.300 -
Wrenches 43
EH 1040.700
EH 1140.300 -
Locating Pins 43
EH 1141.500 Locating Pins 44
page
EH 1141.600 -
EH 1143.700 Locating Pins 44
EH 1047.700 -
EH 1147.700 Intermediate Plates 45
EH 1047.800 -
EH 1147.800 Support Clamping Bars 45
EH 1047.900 -
EH 1147.900 Supporting Plates 46
EH 1048.200 -
EH 1148.300 V-Blocks 46
EH 1048.400 -
EH 1148.400 Locating Segments 47
EH 1048.500 -
EH 1148.500 V-Blocks 47
EH 1048.600 -
EH 1148.600 Adjustable Rotating Elements 48
EH 1149.000 Positioning Clamping Bars 48
EH 1049.200 -
EH 1149.200 Positioning Clamping Bars 49
EH 1162.000 -
EH 1162.300 Fixed Drilling Supports 49
EH 1163.000 -
EH 1163.300 Adjustable Drilling Supports 49
EH 1068.100 -
EH 1068.300
Adaptor Slot Clamping
Elements 50
EH 1068.600 Adaptor Slot Centering Blocks 50
EH 1068.800 Adaptor Slot Blocks 50
EH 1172.200 -
EH 1172.600 Pallets 51
EH 1076.400 Clamping Angles 52
Hole and Dowel Systems
EH 1500.200 -
EH 1600.900 Base Plates 56
EH 1501.300 -
EH 1501.500 Base Plates 57
EH 1505.200 -
EH 1605.400 Clamping Angles 58
EH 1605.700 Clamping Angles 59
EH 1506.200 -
EH 1606.800 Clamping Angles 60
EH 1508.200 -
EH 1608.600 Clamping Cubes 61
EH 1510.100 -
EH 1610.100 Consoles 62
EH 1510.200 -
EH 1610.200 Consoles 62
EH 1511.500 -
EH 1611.500 Clamping Angles 63
EH 1512.000 -
EH 1612.400 Mounting Elements 64
EH 1513.600 -
EH 1613.800 Clamping Bars 64
EH 1614.500 Stops 65
EH 1514.700 -
EH 1614.700 Clamping Heads 65
EH 1617.400 -
EH 1617.900 Spacers 66
EH 1520.400 -
EH 1621.700 Stop Angles 66
EH 1533.000 -
EH 1633.200 Clamping Bars 67
EH 1644.000 Thread Bolts 67
EH 1547.900 -
EH 1647.900 Supporting Plates 67
EH 1548.100 -
EH 1648.100 V-Blocks 68
EH 1548.500 -
EH 1648.500 V-Blocks 69
EH 1548.700 -
EH 1648.800 V-Block Elements right/left 69

page
EH 1549.200 -
EH 1649.200 Positioning Clamping Bars 70
EH 1550.000 -
EH 1650.000 Supporting Bars 70
EH 1551.500 -
EH 1651.700 Cylindrical Stops 71
EH 1553.500 -
EH 1653.500
Positioning Clamping
Cylinders 71
EH 1555.500 -
EH 1655.500 Position Screws 72
EH 1557.000 -
EH 1657.000 Screw Plugs 72
Combi Parts
EH 1580.000 System Adaptor Plates
(T-slot section) 74
EH 1581.000 System Adaptor Plates
(T-slot cross section) 74
EH 1681.000 System Adaptor Plates 74
Multiple Clamping Systems
EH 1582.000 -
EH 1582.100 Clamping Bars 76
EH 1582.400 Step Blocks 76
EH 1582.500 Fixing Bars 77
EH 1582.600 -
EH 1582.700 Jaws 77
EH 1582.800 -
EH 1583.100 Prismatic Jaws 77
EH 1583.200 Jaws 78
EH 1583.300 Jaws 78
EH 23250. Taper Clamping Units 78
EH 1583.400 Position Screws 79
EH 1583.500 -
EH 1583.600 Clamping Units 79
EH 1584.000 Down-Hold Clamps 79
Basic Elements
EH 1901.200 -
EH 1901.600 Pallets DIN 55 201-A1 82
EH 1903.200 -
EH 1903.600 Pallets DIN 55 201-A2 83
EH 1906.210 -
EH 1907.810 Clamping Angles GG / Al 84
EH 1906.240 -
EH 1906.640 Clamping Angles GG 85
EH 1908.210 -
EH 1908.610 Clamping Cubes GG 86
EH 1910.020 -
EH 1910.160 Clamping Angles, welded 87 - 88
EH 1910.220 -
EH 1910.260 Clamping Cubes, welded 89
EH 1912.210 -
EH 1912.620 Base Plates 90
Contents
page
Zero-Point Clamping Systems
EH 1990.070 -
EH 1990.103
EH 1990.105 -
Connecting Elements 96 - 99
EH 1990.108 Connecting Rings 100
EH 1990.114
EH 1990.120 -
Coverings 100
EH 1990.175
EH 1990.190 -
Base Plates 101 - 108
EH 1990.192 Supporting Plates 109
EH 1991.074 Pressure Intensifier 111
Standard Parts
EH 22290. C-Washers 114
EH 22540. Grub Screws 114
EH 22680. Seating Pins 115
EH 22690. Screwed Rest Buttons 116
EH 22700. Ball-Ended Thrust Screws 117
EH 22730. Self-Aligning Pads 117
EH 22740. Self-Aligning Pads 117
EH 23010. T-Nuts 118
EH 23020. T-Nuts >extended< 118
EH 23020. T-Nuts >Rhombus< 118
EH 23040. Studs 119
EH 23050. Spherical Washers
Conical Seats 119
EH 23060. Plain Washers 120
EH 23070. Fixture Nuts 120
EH 23080. Collar Nuts 120
EH 23080. Collar Nuts
with Conical Seat 121
EH 23090. Extension Nuts 121
EH 23110. Fixed Slot Tenons 121
EH 23110. Centering Pins 122
EH 23120. Loose Slot Tenons 122
EH 23150. Clamps 122
EH 23180. Clamps 123
EH 23210. Down-Hold Clamps 123
EH 23220. Bedding Supports 124
EH 23220. Supporting Elements 125
EH 23280. Cylindrical Stops 126
EH 23310. Down-Thrust Clamps 126 - 127
EH 23310. Height Adjusting Cylinders 128
EH 23310. Positioning Rings 128
EH 23320. Floating Clamps 129
EH 23320. Clamping Jaws 130
EH 23690. Compact Clamps 131
EH 23690. Height Adaptors 131
EH 23700. Clamping Element Systems 132
EH 23700. Straight Clamps 132
EH 23700. Intermediate Elements 133
EH 23700. Position Base Elements 133
3 Summary
www.halder.com 5

Summary " T-slot Systems
EH 1000.400 - EH 1000.500
Base Plates
Page 22
EH 1100.700 - EH 1103.500
Base Plates
overall dimensions same
as pallets DIN 55 201
Page 25
EH 1104.700 - EH 1104.900
Clamping Angles
modular design
Page 28
EH 1010.100 - EH 1110.100
Mounting Blocks
Page 31
EH 1012.100 - EH 1112.400
Slotted Clamping Angles
Page 33
EH 1014.500 - EH 1114.500
Stops
Page 35
6 www.halder.com
EH 1000.800
Base Plates
overall dimensions same
as pallets DIN 55 201
Page 23
EH 1101.300 - EH 1101.500
Connecting
Elements
Page 26
EH 1105.200
Clamping Angles
Page 29
EH 1010.200 - EH 1110.300
Mounting Blocks
Page 31
EH 1112.600 - EH 1112.800
Intermediate Elements
Page 34
EH 1115.100
Cylindrical Stops
Page 35
EH 1002.100
Base Plates
Page 23
EH 1102.100 - EH 1102.200
Base Plates
Page 26
EH 1105.800 - EH 1105.900
Coverings
for T-slots
Page 30
EH 1011.100 - EH 1111.300
Mounting Blocks
Page 32
EH 1013.600 - EH 1113.800
Clamping Bars
Page 34
EH 1116.000 - EH 1116.100
Stops
Page 36
EH 1100.300 - EH 1100.500
Base Plates
Page 24
EH 1104.300 - EH 1104.500
Supporting Plates
including accessories
Page 27
EH 1007.400 - EH 1108.300
Spacers
Page 30
EH 1111.700 - EH 1111.800
Intermediate Plates
Page 32
EH 1114.000 - 1114.100
Support Clamping Bars
Page 35
EH 1020.300 - EH 1121.500
Thrust Angles
Page 36

EH 1021.600 - EH 1021.700
Thrust Angles
Page 37
EH 1130.400 - EH 1130.600
T-Blocks
Page 39
EH 1132.500 - EH 1132.800
Butt Straps
Page 40
EH 1137.400
Clamping Vices
fixed jaw
Page 42
EH 1040.300 - EH 1040.700
Locating Pins
Page 43
EH 1047.800 - EH 1147.800
Support Clamping Bars
Page 45
EH 1120.400 - EH 1122.300
Thrust Angles
Page 37
EH 1031.100 - EH 1131.200
T-Clamping Blocks
Page 39
EH 1132.900
Clamping Heads
Page 41
EH 1138.100
Clamping Vices
replacement jaw, soft
Page 42
EH 1140.300 - EH 1141.500
Locating Pins
Page 44
EH 1047.900 - EH 1147.900
Supporting Plates
Page 46
EH 1029.600 - EH 1129.600
T-Slot Centering Blocks
Page 38
EH 1131.500 - EH 1131.700
T-Clamping Blocks
Page 39
EH 1133.000 - EH 1133.200
Clamping Bars
Page 41
EH 1138.400
Clamping Vices
replacement jaw,
ribbed/flat
Page 42
EH 1141.600 - EH 1143.700
Locating Pins
Page 44
EH 1048.200 - EH 1148.300
V-Blocks
Page 46
T-slot Systems
EH 1030.000 - EH 1030.300
T-Nuts
Page 38
EH 1032.100 - EH 1132.100
Wrenches
Page 40
EH 1137.300
Clamping Vices
moveable jaw
Page 41
EH 1139.400 - EH 1139.500
Wrenches
Page 43
EH 1047.700 - EH 1147.700
Intermediate Plates
Page 45
EH 1048.400 - EH 1148.400
Locating
Segments
Page 47
3 Summary
www.halder.com 7

Summary " T-slot Systems
EH 1048.500 - EH 1148.500
V-Blocks
Page 47
EH 1162.000 - EH 1162.300
Fixed Drilling Supports
Page 49
EH 1068.800
Adaptor Slot Blocks
System V40/V70
Page 50
EH 1500.200 - EH 1600.900
Base Plates
Page 56
EH 1506.200 - EH 1606.800
Clamping Angles
Page 60
8 www.halder.com
EH 1048.600 - EH 1148.600
Adjustable Rotating
Elements
Page 48
EH 1163.000 - EH 1163.300
Adjustable Drilling
Supports
Page 49
EH 1172.200 - EH 1172.600
Pallets
Page 51
EH 1501.300 - EH 1501.500
Base Plates
Page 57
EH 1149.000
Positioning Clamping Bars
Page 48
EH 1068.100 - EH 1068.300
Adaptor Slot Clamping
Elements
System V40/V70
Page 50
EH 1076.400
Clamping Angles
Page 52
Hole and Dowel Systems
EH 1508.200 - EH 1608.600
Clamping Cubes
Page 61
EH 1505.200 - EH 1605.400
Clamping Angles
Page 58
EH 1510.100 - EH 1610.100
Consoles
Page 62
EH 1049.200 - EH 1149.200
Positioning Clamping Bars
twin faced
Page 49
EH 1068.600
Adaptor Slot Centering
Blocks
System V40/V70
Page 50
EH 1605.700
Clamping Angles
Page 59
EH 1510.200 - EH 1610.200
Consoles
Page 62

EH 1511.500 - EH 1611.500
Clamping Angles
Page 63
EH 1514.700 - EH 1614.700
Clamping Heads
Page 65
EH 1644.000
Thread Bolts
Page 67
EH 1548.700 - EH 1648.800
V-Block Elements
right/left
Page 69
EH 1553.500 - EH 1653.500
Positioning Clamping
Cylinders
Page 71
EH 1512.000 - EH 1612.400
Mounting Elements
Page 64
EH 1617.400 - EH 1617.900
Spacers
Page 66
EH 1547.900 - EH 1647.900
Supporting Plates
Page 67
EH 1549.200 - EH 1649.200
Positioning Clamping Bars
Page 70
EH 1555.500 - EH 1655.500
Position Screws
Page 72
Hole and Dowel Systems
EH 1513.600 - EH 1613.800
Clamping Bars
Page 64
EH 1520.400 - EH 1621.700
Stop Angles
Page 66
EH 1548.100 - EH 1648.100
V-Blocks
Page 68
EH 1550.000 - EH 1650.000
Supporting Bars
Page 70
EH 1557.000 - EH 1657.000
Screw Plugs
Page 72
EH 1614.500
Stops
Page 65
EH 1533.000 - EH 1633.200
Clamping Bars
Page 67
EH 1548.500 - EH 1648.500
V-Blocks
Page 69
EH 1551.500 - EH 1651.700
Cylindrical Stops
Page 71
3 Summary
www.halder.com 9

Summary " Combi Parts
EH 1580.000
System Adaptor Plates
(T-slot section)
Page 74
EH 1582.000 - EH 1582.100
Clamping Bars
Page 76
EH 1582.800 - EH 1583.100
Prismatic Jaws
Page 77
EH 1583.400
Position Screws
Page 79
10 www.halder.com
EH 1581.000
System Adaptor Plates
(T-slot cross section)
Page 74
EH 1582.400
Step Blocks
Page 76
EH 1583.200
Jaws
ribbed
Page 78
EH 1681.000
System Adaptor Plates
Page 74
Multiple Clamping Systems
EH 1583.500 - EH 1583.600
Clamping Units
Page 79
EH 1582.500
Fixing Bars
Page 77
EH 1583.300
Jaws
soft
Page 78
EH 1584.000
Down-Hold Clamps
Page 79
EH 1582.600 - EH 1582.700
Jaws
flat
Page 77
EH 23250.
Taper Clamping Units
Page 78

EH 1901.
Pallets
DIN 55 201-A1
Page 82
EH 1908.
Clamping Cubes
semi-finished
Page 86
EH 1912.
Base Plates
semi-finished
Page 90
EH 1990.
Connecting Elements
hydraulically operated,
double acting, with liftingoff
and blow-out
Page 96
EH 1990.
Connecting Elements
modular, pneumatically
operated
Page 99
EH 1903.
Pallets
DIN 55 201-A2
Page 83
EH 1910.
Clamping Angles
one-sided, welded,
semi-finished
Page 87
EH 1912.
Base Plates
with positioning holes
Page 90
EH 1990.
Connecting Elements
hydraulically operated,
single acting with lifting-off
Page 97
EH 1990.
Connecting Elements
modular, mechanically
operated, protected
against twisting
Page 99
EH 1906. / EH 1907.
Clamping Angles
semi-finished
Page 84
EH 1910.
Clamping Angles
welded, semi-finished
Page 88
EH 1990.
Connecting Elements
modular, mechanically
operated
Page 98
EH 1990.
Connecting Rings
Page 100
Basic Elements
EH 1906.
Clamping Angles
Page 85
EH 1910.
Clamping Cubes
welded, semi-finished
Page 89
Zero-Point Clamping Systems
EH 1990.
Connecting Elements
modular, hydraulically
operated
Page 98
EH 1990.
Coverings
for connecting elements
Page 100
3 Summary
www.halder.com 11

Summary " Zero-Point Clamping Systems
EH 1990.
Base Plates
for 2 connecting elements
Page 101
EH 1990.
Base Plates
for 4 double acting
connecting elements
Page 105
EH 1990.
Supporting Plates
with 2 connecting rings
Page 109
EH 22290.
C-Washers
DIN 6372
Page 114
EH 22690.
Screwed Rest Buttons
Page 116
12 www.halder.com
EH 1990.
Base Plates
with 2 connecting
elements
Page 102
EH 1990.
Base Plates
with 4 double acting
connecting elements
Page 106
EH 1990.
Supporting Plates
with 4 connecting rings
Page 109
Standard Parts
EH 22540.
Grub Screws
DIN 6332 with thrust point
form S
Page 114
EH 22700.
Ball-Ended Thrust Screws
ball secured against
rotating
Page 117
EH 1990.
Base Plates
for 4 connecting elements
Page 103
EH 1990.
Base Plates
for 4 single acting
connecting elements
Page 107
EH 1991.
Pressure Intensifier
Page 111
EH 22680.
Seating Pins
ribbed
Page 115
EH 22730.
Self-Aligning Pads
Page 117
EH 1990.
Base Plates
with 4 connecting
elements
Page 104
EH 1990.
Base Plates
with 4 single acting
connecting elements
Page 108
EH 22680.
Seating Pins
pin-shaped
Page 115
EH 22740.
Self-Aligning Pads
adjustable
Page 117

EH 23010.
T-Nuts
DIN 508
Page 118
EH 23050.
Spherical Washers
Conical Seats
DIN 6319
Page 119
EH 23080.
Collar Nuts
with Conical Seat
Page 121
EH 23120.
Loose Slot Tenons
DIN 6323
Page 122
EH 23220.
Bedding Supports
Page 124
EH 23310.
Down-thrust clamps
with clamping screw
size 40
Page 127
EH 23020.
T-Nuts >extended<
Page 118
EH 23060.
Plain Washers
DIN 6340 heat-treated
Page 120
EH 23090.
Extension Nuts
(height 3 d)
Page 121
EH 23150.
Clamps
DIN 6315 B forked
Page 122
EH 23220.
Supporting Elements
Page 125
EH 23310.
Height
Adjusting Cylinders
Page 128
EH 23020.
T-Nuts >Rhombus<
Page 118
EH 23070.
Fixture Nuts
DIN 6330
(height 1,5 d)
Page 120
EH 23110.
Fixed Slot Tenons
with cylindrical fastening
Page 121
EH 23180.
Clamps
with nose
Page 123
EH 23280.
Cylindrical Stops
Page 126
EH 23310.
Positioning Rings
for down-thrust clamp,
size 40
Page 128
Standard Parts
EH 23040.
Studs
DIN 6379 b1 long
for T-Nuts
Page 119
EH 23080.
Collar Nuts
DIN 6331
(height 1,5 d)
Page 120
EH 23110.
Centering Pins
Page 122
EH 23210.
Down-Hold Clamps
without clamping lever
Page 123
EH 23310.
Down-Thrust Clamps
size 25
Page 126
EH 23320.
Floating Clamps
combined clamping and
locking M 12
Page 129
3 Summary
www.halder.com 13

Summary " Standard Parts
EH 23320.
Clamping Jaws
for floating clamp M 12
Page 130
EH 23700.
Straight Clamps
long
Page 132
14 www.halder.com
EH 23690.
Compact Clamps
Page 131
EH 23700.
Intermediate Elements
Page 133
EH 23690.
Height Adaptors
for compact clamp
Page 131
EH 23700.
Position Base Elements
Page 133
EH 23700.
Clamping Element
Systems
Page 132

Qty. Description Ref. No.
System parts
2 Base plate 1000.400
5 Spacer 1007.400
5 Spacer 1007.600
5 Spacer 1007.700
5 Spacer 1007.800
5 Spacer 1007.900
6 Mounting block 1010.100
2 Mounting block 1010.200
1 Mounting block 1010.300
3 Mounting block 1011.100
1 Mounting block 1011.200
1 Mounting block 1011.300
1 Clamping bar 1013.600
3 Abutment 1014.500
4 T-slot centering block 1029.600
10 T-nuts 1030.100
15 T-nuts 1030.300
8 T-clamping block 1031.100
3 T-clamping block 1031.200
4 T-clamping block 1031.300
1 Wrench 1032.100
2 Intermediate plate 1047.700
1 Support clamping bar 1047.800
3 Supporting plate 1047.900
Assortment for the simultaneous construction of 3 fi xtures, Ref. No. 1090.120
Qty. Description Ref. No.
System parts
2 Base plate 1000.400
1 Base plate 1000.500
5 Spacer 1007.400
5 Spacer 1007.600
5 Spacer 1007.700
20 Spacer 1007.800
5 Spacer 1007.900
8 Mounting block 1010.100
4 Mounting block 1010.200
2 Mounting block 1010.300
6 Mounting block 1011.100
4 Mounting block 1011.200
2 Mounting block 1011.300
1 Slotted clamping angle 1012.100
1 Clamping bar 1013.600
1 Clamping bar 1013.700
6 Abutment 1014.500
1 Thrust angle 1020.300
1 Thrust angle 1021.600
1 Thrust angle 1021.700
5 T-slot centering block 1029.600
20 T-nuts 1030.100
37 T-nuts 1030.300
15 T-clamping block 1031.100
5 T-clamping block 1031.200
5 T-clamping block 1031.300
1 Wrench 1032.100
2 Intermediate plate 1047.700
2 Support clamping bar 1047.800
6 Supporting plate 1047.900
Standard Assortments V40
Assortment for the simultaneous construction of 2 fi xtures, Ref. No. 1090.110
Qty. Description Ref. No.
Standard parts from the Halder Standard line
3 Grub screw 22540.0381
3 Grub screw 22540.0382
3 Screwed rest button, plain 22690.0021
3 Screwed rest button, plain 22690.0321
3 Self-aligning pad, plain 22730.0013
3 Self-aligning pad, ribbed 22730.0313
5 Stud for T-nuts 23040.0582
3 Stud for T-nuts 23040.0583
3 Stud for T-nuts 23040.0584
2 Conical seat 23050.0208
5 Plain washer 23060.0008
5 Fixture nut 23070.0008
2 Collar nut 23080.0008
5 Extension nut 23090.0008
2 Clamp 23150.0009
3 Clamp with nose 23180.0209
2 Down-hold clamp 23210.0502
1 Bedding support 23220.0085
4 Height adjusting cylinder 23310.0125
2 Height adjusting cylinder 23310.0126
2 Height adjusting cylinder 23310.0127
Qty. Description Ref. No.
Standard parts from the Halder Standard line
5 Grub screw 22540.0381
5 Grub screw 22540.0382
4 Screwed rest button, plain 22690.0021
3 Screwed rest button, spherical 22690.0121
3 Screwed rest button, ribbed 22690.0221
4 Screwed rest button, plain 22690.0321
3 Screwed rest button, spherical 22690.0421
3 Screwed rest button, spherical 22690.0423
3 Screwed rest button, ribbed 22690.0521
4 Self-aligning pad, plain 22730.0013
3 Self-aligning pad, ribbed 22730.0313
5 Stud for T-nuts 23040.0582
5 Stud for T-nuts 23040.0583
3 Stud for T-nuts 23040.0584
3 Conical seat 23050.0208
10 Plain washer 23060.0008
5 Fixture nut 23070.0008
3 Collar nut 23080.0008
5 Extension nut 23090.0008
2 Clamp 23150.0009
3 Clamp with nose 23180.0209
2 Down-hold clamp 23210.0501
2 Down-hold clamp 23210.0502
2 Bedding support 23220.0085
2 Down-thrust clamp 23310.0025
6 Height adjusting cylinder 23310.0125
4 Height adjusting cylinder 23310.0126
2 Height adjusting cylinder 23310.0127
T-slot Systems
3 Summary
www.halder.com 15

T-slot Systems
Summary " Standard Assortments V40
Assortment for the simultaneous construction of 5 fi xtures, Ref. No. 1090.140
Qty.
System parts
Description Ref. No.
3 Base plate 1000.400
2 Base plate 1000.500
5 Spacer 1007.400
5 Spacer 1007.500
5 Spacer 1007.600
15 Spacer 1007.700
20 Spacer 1007.800
5 Spacer 1007.900
12 Mounting block 1010.100
5 Mounting block 1010.200
3 Mounting block 1010.300
6 Mounting block 1011.100
5 Mounting block 1011.200
3 Mounting block 1011.300
2 Slotted clamping angle 1012.100
2 Slotted clamping angle 1012.300
1 Clamping bar 1013.700
1 Clamping bar 1013.800
8 Abutment 1014.500
1 Thrust angle 1020.300
1 Thrust angle 1021.500
1 Thrust angle 1021.600
1 Thrust angle 1021.700
8 T-slot centering block 1029.600
30 T-nuts 1030.100
55 T-nuts 1030.300
25 T-clamping block 1031.100
20 T-clamping block 1031.200
10 T-clmaping block 1031.300
1 Wrench 1032.100
1 Locating pin 1040.300
1 Locating pin 1040.500
2 Intermediate plate 1047.700
2 Support clamping bar 1047.800
9 Supporting plate 1047.900
2 V-block 1048.200
2 V-block 1048.300
2 Loacating segment 1048.400
1 V-block 1048.500
1 Adjustable rotating element 1048.600
3 Positioning clamping bar, twinfaced
1049.200
16 www.halder.com
Qty. Description Ref. No.
Standard parts from the Halder standard line
10 Grub screw 22540.0381
10 Grub screw 22540.0382
4 Screwed rest button, plain 22690.0021
3 Screwed rest button, spherical 22690.0121
3 Screwed rest button, ribbed 22690.0221
4 Screwed rest button, plain 22690.0321
4 Screwed rest button, plain 22690.0323
3 Screwed rest button, spherical 22690.0421
3 Screwed rest button, spherical 22690.0423
3 Screwed rest button, ribbed 22690.0521
3 Screwed rest button, ribbed 22690.0523
5 Ball-ended thrust screw 22700.0584
6 Self-aligning pad, plain 22730.0013
6 Self-aligning pad, ribbed 22730.0313
5 Stud for T-nuts 23040.0582
10 Stud for T-nuts 23040.0583
10 Stud for T-nuts 23040.0584
10 Conical seat 23050.0208
50 Plain washer 23060.0008
15 Fixture nut 23070.0008
10 Collar nut 23080.0008
10 Extension nut 23090.0008
4 Clamp 23150.0009
6 Clamp with nose 23180.0209
6 Down-hold clamp 23210.0501
2 Down-hold clamp 23210.0502
5 Bedding support 23220.0085
5 Down-thrust clamp 23310.0025
20 Height adjusting cylinder 23310.0125
10 Height adjusting cylinder 23310.0126
6 Height adjusting cylinder 23310.0127

Qty. Description Ref. No.
System parts
2 Base plate 1100.400
5 Spacer 1107.400
5 Spacer 1107.600
5 Spacer 1107.700
5 Spacer 1107.800
5 Spacer 1107.900
6 Mounting block 1110.100
2 Mounting block 1110.200
1 Mounting block 1110.300
3 Mounting block 1111.100
1 Mounting block 1111.200
1 Mounting block 1111.300
4 Abutment 1114.500
2 T-slot centering block 1129.600
2 T-block 1130.600
8 T-clamping block 1131.100
4 T-clamping block 1131.200
2 T-clamping block 1131.500
2 T-clamping block 1131.600
2 T-clamping block 1131.700
1 Wrench 1132.100
2 Butt strap 1132.800
1 Clamping head 1132.900
2 Clamping block 1133.000
1 Wrench 1139.400
1 Wrench 1139.500
2 Intermediate plate 1147.700
1 Support clamping bar 1147.800
4 Supporting plate 1147.900
Assortment for the simultaneous construction of 3 fi xtures, Ref. No. 1190.120
Qty. Description Ref. No.
System parts
1 Base plate 1100.300
2 Base plate 1100.400
5 Spacer 1107.400
5 Spacer 1107.600
10 Spacer 1107.700
20 Spacer 1107.800
8 Mounting block 1110.100
4 Mounting block 1110.200
2 Mounting block 1110.300
6 Mounting block 1111.100
4 Mounting block 1111.200
2 Mounting block 1111.300
1 Slotted clamping angle 1112.100
1 Clamping bar 1113.700
6 Abutment 1114.500
1 Thrust angle 1120.300
2 Thrust angle 1120.400
2 Thrust angle 1121.000
2 T-slot centering block 1129.600
1 T-block 1130.400
2 T-block 1130.600
18 T-clamping block 1131.100
7 T-clamping block 1131.200
4 T-clamping block 1131.500
4 T-clamping block 1131.600
2 T-clamping block 1131.700
1 Wrench 1132.100
2 Butt strap 1132.800
2 Clamping head 1132.900
3 Clamping block 1133.000
1 Wrench 1139.400
1 Wrench 1139.500
2 Intermediate plate 1147.700
2 Support clamping bar 1147.800
6 Supporting plate 1147.900
2 Fixed drilling support 1162.200
1 Adjustable drilling support 1163.100
Standard Assortments V70
Assortment for the simultaneous construction of 2 fi xtures, Ref. No. 1190.110
Qty. Description Ref. No.
Standard parts from the Halder Standard line
3 Grub screw 22540.0401
3 Grub screw 22540.0422
1 Grub screw 22540.0423
3 Screwed rest button, plain 22690.0001
3 Screwed rest button, ribbed 22690.0201
3 Screwed rest button, plain 22690.0303
3 Screwed rest button, spherical 22690.0401
3 Self-aligning pad, plain 22730.0020
3 Self-aligning pad, ribbed 22730.0320
10 T-nut 23010.0142
20 T-nut, extended 23020.0140
5 Stud for T-nuts 23040.0602
5 Stud for T-nuts 23040.0623
3 Stud for T-nuts 23040.0625
2 Stud for T-nuts 23040.0664
2 Conical seat 23050.0210
2 Conical seat 23050.0212
5 Plain washer 23060.0012
2 Fixture nut 23070.0010
5 Fixture nut 23070.0012
2 Fixture nut 23070.0016
2 Collar nut 23080.0012
2 Extension nut 23090.0010
5 Extension nut 23090.0012
2 Extension nut 23090.0016
2 Clamp 23150.0014
2 Clamp 23150.0015
2 Clamp 23150.0016
2 Down-hold clamp 23210.0522
1 Bedding support 23220.0150
3 Cylindrical stop 23280.0114
3 Cylindrical stop 23280.0214
4 Height adjusting cylinder 23310.0140
2 Height adjusting cylinder 23310.0141
2 Height adjusting cylinder 23310.0160
Qty. Description Ref. No.
Standard parts from the Halder Standard line
2 Grub screw 22540.0401
5 Grub screw 22540.0421
5 Grub screw 22540.0423
3 Grub screw 22540.0463
3 Screwed rest button, plain 22690.0001
3 Screwed rest button, spherical 22690.0101
3 Screwed rest button, ribbed 22690.0201
3 Screwed rest button, plain 22690.0303
3 Screwed rest button, spherical 22690.0403
3 Screwed rest button, spherical 22690.0405
3 Screwed rest button, ribbed 22690.0503
3 Self-aligning pad, plain 22730.0020
3 Self-aligning pad, ribbed 22730.0320
20 T-nut 23010.0142
5 T-nut 23010.0144
50 T-nut, extended 23020.0140
10 T-nut, Rhombus 23020.0640
5 Stud for T-nuts 23040.0602
5 Stud for T-nuts 23040.0623
4 Stud for T-nuts 23040.0624
5 Stud for T-nuts 23040.0625
3 Stud for T-nuts 23040.0626
3 Stud for T-nuts 23040.0664
2 Conical seat 23050.0210
3 Conical seat 23050.0212
3 Conical seat 23050.0216
10 Plain washer 23060.0012
3 Plain washer 23060.0016
2 Fixture nut 23070.0010
5 Fixture nut 23070.0012
3 Fixture nut 23070.0016
3 Collar nut 23080.0012
2 Extension nut 23090.0010
5 Extension nut 23090.0012
3 Extension nut 23090.0016
2 Clamp 23150.0014
2 Clamp 23150.0015
2 Clamp 23150.0016
2 Clamp 23150.0018
1 Clamp 23150.0020
2 Clamp with nose 23180.0213
2 Down-hold clamp 23210.0521
2 Down-hold clamp 23210.0522
2 Bedding support 23220.0150
3 Cylindrical stop 23280.0114
3 Cylindrical stop 23280.0214
2 Down-thrust clamp 23310.0054
6 Height adjusting cylinder 23310.0140
4 Height adjusting cylinder 23310.0141
2 Height adjusting cylinder 23310.0160
T-slot Systems
3 Summary
www.halder.com 17

T-slot Systems
Summary " Standard Assortments V70
Assortment for the simultaneous construction of 5 fi xtures, Ref. No. 1190.140
18 www.halder.com
Qty. Description Ref. No.
System parts
1 Base plate 1100.300
2 Base plate 1100.400
2 Base plate 1100.500
1 Connecting element 1101.400
5 Spacer 1107.400
5 Spacer 1107.500
5 Spacer 1107.600
15 Spacer 1107.700
20 Spacer 1107.800
5 Spacer 1107.900
10 Mounting block 1110.100
5 Mounting block 1110.200
3 Mounting block 1110.300
6 Mounting block 1111.100
5 Mounting block 1111.200
2 Mounting block 1111.300
3 Intermediate plate 1111.700
2 Intermediate plate 1111.800
2 Slotted clamping angle 1112.100
1 Clamping bar 1113.700
1 Clamping bar 1113.800
3 Support clamping bar 1114.000
10 Abutment 1114.500
3 Abutment 1115.100
1 Thrust angle 1120.400
1 Thrust angle 1121.000
1 Thrust angle 1121.700
1 Thrust angle 1122.300
2 T-slot centering block 1129.600
2 T-block 1130.400
6 T-block 1130.600
30 T-clamping block 1131.100
20 T-clamping block 1131.200
5 T-clamping block 1131.500
5 T-clamping block 1131.600
3 T-clamping block 1131.700
1 Wrench 1132.100
4 Butt strap 1132.800
2 Clamping head 1132.900
5 Clamping block 1133.000
1 Wrench 1139.400
1 Wrench 1139.500
1 Locating pin 1140.800
1 Locating pin 1141.900
2 Intermediate plate 1147.700
2 Support clamping bar 1147.800
10 Supporting plate 1147.900
2 Locating segment 1148.400
1 V-block 1148.500
3 Positioning clamping bar 1149.000
2 Fixed drilling support 1162.100
2 Fixed drilling support 1162.200
1 Adjustable drilling support 1163.100
Qty. Description Ref. No.
Standard parts from the Halder Standard line
5 Grub screw 22540.0401
10 Grub screw 22540.0421
10 Grub screw 22540.0422
10 Grub screw 22540.0423
10 Grub screw 22540.0462
10 Grub screw 22540.0463
3 Screwed rest button, plain 22690.0001
3 Screwed rest button, plain 22690.0002
3 Screwed rest button, spherical 22690.0101
3 Screwed rest button, spherical 22690.0102
3 Screwed rest button, ribbed 22690.0201
3 Screwed rest button, ribbed 22690.0202
3 Screwed rest button, plain 22690.0302
3 Screwed rest button, plain 22690.0303
3 Screwed rest button, spherical 22690.0402
3 Screwed rest button, spherical 22690.0404
3 Screwed rest button, ribbed 22690.0502
3 Screwed rest button, ribbed 22690.0504
5 Ball-ended thrust screw 22700.0626
6 Self-aligning pad, plain 22730.0020
3 Self-aligning pad, plain 22730.0030
6 Self-aligning pad, ribbed 22730.0320
3 Self-aligning pad, ribbed 22730.0330
30 T-nut 23010.0142
10 T-nut 23010.0144
80 T-nut, extended 23020.0140
10 T-nut, Rhombus 23020.0640
5 Stud for T-nuts 23040.0602
5 Stud for T-nuts 23040.0603
5 Stud for T-nuts 23040.0604
5 Stud for T-nuts 23040.0622
10 Stud for T-nuts 23040.0623
10 Stud for T-nuts 23040.0624
10 Stud for T-nuts 23040.0625
10 Stud for T-nuts 23040.0626
10 Stud for T-nuts 23040.0627
5 Stud for T-nuts 23040.0662
5 Stud for T-nuts 23040.0664
5 Stud for T-nuts 23040.0665
5 Stud for T-nuts 23040.0667
10 Conical seat 23050.0210
10 Conical seat 23050.0212
10 Conical seat 23050.0216
10 Plain washer 23060.0010
50 Plain washer 23060.0012
20 Plain washer 23060.0016
5 Fixture nut 23070.0010
15 Fixture nut 23070.0012
10 Fixture nut 23070.0016
5 Collar nut 23080.0010
10 Collar nut 23080.0012
5 Collar nut 23080.0016
5 Extension nut 23090.0010
10 Extension nut 23090.0012
10 Extension nut 23090.0016
4 Clamp 23150.0014
2 Clamp 23150.0015
3 Clamp 23150.0016
2 Clamp 23150.0018
2 Clamp 23150.0019
2 Clamp with nose 23180.0213
6 Down-hold clamp 23210.0521
2 Down-hold clamp 23210.0522
5 Bedding support 23220.0150
8 Cylindrical stop 23280.0114
3 Cylindrical stop 23280.0214
2 Down-thrust clamp 23310.0051
4 Down-thrust clamp 23310.0054
2 Down-thrust clamp 23310.0057
15 Height adjusting cylinder 23310.0140
5 Height adjusting cylinder 23310.0141
4 Height adjusting cylinder 23310.0142
5 Height adjusting cylinder 23310.0160
4 Height adjusting cylinder 23310.0161
2 Height adjusting cylinder 23310.0162

Assortment for the simultaneous construction of 2 fi xtures, Ref. No. 1590.110
Qty. Description Ref. No.
System parts
2 Base plate 1501.300
1 Console 1510.100
3 Mounting element 1512.000
3 Clamping block 1513.600
2 Clamping block 1513.700
1 Stop angle 1520.400
1 Stop angle 1520.500
3 Supporting plate 1547.900
1 V-block 1548.500
2 Positioning clamping bar 1549.400
5 Supporting bar 1550.000
3 Abutment 1551.500
3 Abutment 1551.700
3 Positioning clamping cylinder 1553.500
20 Position screw 1555.500
100 Screw plug 1557.000
1 System adaptor plate 1581.000
2 Spacer 1107.400
4 Spacer 1107.600
8 Spacer 1107.800
2 Spacer 1107.900
5 Abutment 1114.500
1 Wrench 1139.400
2 Supporting plate 1147.900
1 Adjustable drilling support 1163.000
Assortment for the simultaneous construction of 5 fi xtures, Ref. No. 1590.140
Qty. Description Ref. No.
System parts
3 Base plate 1501.300
2 Base plate 1501.500
2 Clamping angle 1505.200
6 Console 1510.100
2 Console 1510.200
8 Mounting element 1512.000
6 Clamping block 1513.600
6 Clamping block 1513.700
3 Clamping head 1514.700
3 Stop angle 1520.400
3 Stop angle 1520.500
5 Clamping block 1533.000
3 Clamping block 1533.200
6 Supporting plate 1547.900
2 V-block 1548.100
2 V-block 1548.500
2 V-Block element right 1548.700
2 V-Block element left 1548.800
3 Positioning clamping bar 1549.200
3 Positioning clamping bar 1549.400
12 Supporting bar 1550.000
6 Abutment 1551.500
6 Abutment 1551.700
6 Positioning clamping cylinder 1553.500
30 Position screw 1555.500
300 Screw plug 1557.000
4 System adaptor plate 1580.000
4 System adaptor plate 1581.000
5 Spacer 1107.400
10 Spacer 1107.600
20 Spacer 1107.800
10 Spacer 1107.900
1 Slotted clamping angle 1112.100
1 Slotted clamping angle 1112.400
10 Abutment 1114.500
2 T-slot centering block 1129.600
1 Wrench 1139.400
1 Locating pin 1140.700
1 Locating pin 1140.800
2 Intermediate plate 1147.700
2 Support clamping bar 1147.800
5 Supporting plate 1147.900
1 Adjustable drilling support 1163.000
1 Adjustable drilling support 1163.100
Hole and Dowel Systems
Standard Assortments L12 3 Summary
Qty. Description Ref. No.
Standard parts from the Halder Standard Line
2 Grub screw 22540.0421
2 Grub screw 22540.0422
2 Grub screw 22540.0423
2 Screwed rest button, plain 22690.0001
2 Screwed rest button, spherical 22690.0102
2 Screwed rest button, plain 22690.0302
2 Screwed rest button, plain 22690.0304
3 Screwed rest button, ribbed 22690.0502
1 Self-aligning pad, plain,
adjustable
22740.0017
8 T-nut 23010.0142
2 Stud for T-nuts 23040.0624
2 Stud for T-nuts 23040.0625
2 Stud for T-nuts 23040.0626
2 Stud for T-nuts 23040.0627
4 Plain washer 23060.0012
4 Collar nut 23080.0012
4 Extension nut 23090.0012
2 Clamp 23150.0015
2 Clamp 23150.0016
2 Down-hold clamp 23210.0521
1 Down-thrust clamp 23310.0051
1 Down-thrust clamp 23310.0054
5 Height adjusting cylinder 23310.0140
3 Height adjusting cylinder 23310.0141
1 Height adjusting cylinder 23310.0142
Qty. Description Ref. No.
Standard parts from the Halder Standard line
5 Grub screw 22540.0421
5 Grub screw 22540.0422
5 Grub screw 22540.0423
3 Screwed rest button, plain 22690.0001
3 Screwed rest button, plain 22690.0002
3 Screwed rest button, spherical 22690.0101
3 Screwed rest button, spherical 22690.0102
3 Screwed rest button, ribbed 22690.0201
3 Screwed rest button, ribbed 22690.0202
3 Screwed rest button, plain 22690.0302
3 Screwed rest button, plain 22690.0303
2 Screwed rest button, spherical 22690.0402
3 Screwed rest button, spherical 22690.0404
3 Screwed rest button, ribbed 22690.0502
3 Screwed rest button, ribbed 22690.0504
2 Ball-ended thrust screw 22700.0624
2 Ball-ended thrust screw 22700.0626
3 Self-aligning pad, plain 22730.0020
2 Self-aligning pad, plain,
adjustable
22740.0017
15 T-nut 23010.0142
5 Stud for T-nuts 23040.0624
5 Stud for T-nuts 23040.0625
5 Stud for T-nuts 23040.0626
5 Stud for T-nuts 23040.0627
3 Stud for T-nuts 23040.0664
3 Stud for T-nuts 23040.0665
3 Stud for T-nuts 23040.0666
6 Conical seat 23050.0212
4 Conical seat 23050.0216
25 Plain washer 23060.0012
10 Plain washer 23060.0016
6 Fixture nut 23070.0012
4 Fixture nut 23070.0016
10 Collar nut 23080.0012
10 Collar nut 23080.0016
6 Extension nut 23090.0012
4 Extension nut 23090.0016
4 Clamp 23150.0015
4 Clamp 23150.0016
2 Clamp 23150.0019
2 Clamp 23150.0020
3 Clamp with nose 23180.0213
2 Down-hold clamp 23210.0521
2 Down-hold clamp 23210.0522
2 Bedding support 23220.0150
2 Down-thrust clamp 23310.0051
1 Down-thrust clamp 23310.0054
1 Down-thrust clamp 23310.0057
16 Height adjusting cylinder 23310.0140
8 Height adjusting cylinder 23310.0141
6 Height adjusting cylinder 23310.0142
www.halder.com 19

Hole and Dowel Systems
Summary " Standard Assortments L16
Assortment for the simultaneous construction of 2 fi xtures, Ref. No. 1690.110
Assortment for the simultaneous construction of 4 fi xtures, Ref. No. 1690.130
20 www.halder.com
Qty. Description Ref. No.
System parts
2 Base plate 1600.600
2 Console 1610.100
2 Mounting element 1612.200
2 Mounting element 1612.400
2 Clamping block 1613.700
5 Abutment 1614.500
4 Spacer 1617.400
4 Spacer 1617.600
6 Spacer 1617.800
4 Spacer 1617.900
1 Stop angle 1621.600
1 Stop angle 1621.700
2 Clamping block 1633.000
1 Clamping block 1633.200
4 Thread bolt 1644.000
3 Supporting plate 1647.900
1 V-block 1648.500
4 Supporting bar 1650.000
3 Abutment 1651.500
3 Positioning clamping cylinder 1653.500
12 Position screw 1655.500
100 Screw plug 1657.000
Qty. Description Ref. No.
System parts
3 Base plate 1600.600
1 Base plate 1600.700
2 Clamping angle 1605.200
6 Console 1610.100
2 Console 1610.200
6 Mounting element 1612.200
4 Mounting element 1612.400
4 Clamping block 1613.700
4 Clamping block 1613.800
10 Abutment 1614.500
3 Clamping head 1614.700
5 Spacer 1617.400
5 Spacer 1617.500
10 Spacer 1617.600
5 Spacer 1617.700
20 Spacer 1617.800
10 Spacer 1617.900
2 Stop angle 1621.600
2 Stop angle 1621.700
5 Clamping block 1633.000
3 Clamping block 1633.200
10 Thread bolt 1644.000
6 Supporting plate 1647.900
2 V-block 1648.100
2 V-block 1648.500
2 V-Block element right 1648.700
2 V-Block element left 1648.800
3 Positioning clamping bar 1649.200
12 Suporting bar 1650.000
6 Abutment 1651.500
3 Abutment 1651.700
5 Positioning clamping cylinder 1653.500
25 Position screw 1655.500
300 Screw plug 1657.000
Qty. Description Ref. No.
Standard parts from the Halder Standard line
2 Grub screw 22540.0462
2 Grub screw 22540.0463
2 Screwed rest button, plain 22690.0042
2 Screwed rest button, spherical 22690.0142
2 Screwed rest button, plain 22690.0343
2 Screwed rest button, plain 22690.0345
2 Screwed rest button, ribbed 22690.0543
3 Self-aligning pad, plain 22730.0030
2 Self-aligning pad, plain,
adjustable
22740.0240
5 T-nut 23010.0182
2 Stud for T-nuts 23040.0662
2 Stud for T-nuts 23040.0664
2 Stud for T-nuts 23040.0665
2 Stud for T-nuts 23040.0666
2 Stud for T-nuts 23040.0667
10 Plain washer 23060.0016
5 Collar nut 23080.0016
4 Extension nut 23090.0016
2 Clamp 23150.0019
2 Clamp 23150.0020
3 Clamp 23180.0217
5 Height adjusting cylinder 23310.0165
3 Height adjusting cylinder 23310.0166
2 Height adjusting cylinder 23310.0167
Qty. Description Ref. No.
Standard parts from the Halder Standard line
5 C-Washer 22290.0016
5 Grub screw 22540.0462
5 Grub screw 22540.0463
3 Screwed rest button, plain 22690.0042
3 Screwed rest button, plain 22690.0043
3 Screwed rest button, spherical 22690.0142
3 Screwed rest button, spherical 22690.0143
3 Screwed rest button, ribbed 22690.0242
3 Screwed rest button, ribbed 22690.0243
3 Screwed rest button, plain 22690.0343
3 Screwed rest button, plain 22690.0345
3 Screwed rest button, spherical 22690.0443
3 Screwed rest button, spherical 22690.0445
3 Screwed rest button, ribbed 22690.0543
3 Screwed rest button, ribbed 22690.0545
3 Self-aligning pad, plain 22730.0030
3 Self-aligning pad, ribbed 22730.0330
2 Self-aligning pad, plain,
adjustable
22740.0024
10 T-nut 23010.0182
4 Stud for T-nuts 23040.0662
4 Stud for T-nuts 23040.0664
4 Stud for T-nuts 23040.0665
4 Stud for T-nuts 23040.0666
4 Stud for T-nuts 23040.0667
4 Conical seat 23050.0216
30 Plain washer 23060.0016
5 Fixture nut 23070.0016
10 Collar nut 23080.0016
10 Extension nut 23090.0016
4 Clamp 23150.0018
4 Clamp 23150.0019
2 Clamp 23150.0020
3 Clamp 23180.0217
2 Down-hold clamp 23210.0541
8 Height adjusting cylinder 23310.0145
4 Height adjusting cylinder 23310.0146
3 Height adjusting cylinder 23310.0147
8 Height adjusting cylinder 23310.0165
4 Height adjusting cylinder 23310.0166
3 Height adjusting cylinder 23310.0167

T-slot Systems
www.halder.com

T-slot Systems
EH 1000.400 -
EH 1000.500
Base Plates
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
22 www.halder.com
"
Slot spacing 40 –0,01.
>>> Special plates upon request.

* These tolerances are valid only for the exterior stop types.
Slot spacing 40 –0,01.
>>> Special plates upon request. > Special plates upon request.

T-slot Systems
EH 1100.300 -
EH 1100.500
Base Plates
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
24 www.halder.com
"
Slot spacing 70 –0,01.
>>> Special plates upon request.

Slot spacing 70 –0,01.
* These tolerances are valid only for the exterior stop types.
>>> Special plates upon request.

T-slot Systems
EH 1101.300 -
EH 1101.500
Connecting
Elements
EH 1102.100 -
EH 1102.200
Base Plates
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
26 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No.
Number of
T-slots l n kg System
1101.300 1·6 420 5 8,0 V70
1101.400 1·7 490 6 9,3 V70
1101.500 1·9 630 8 11,8 V70
Slot spacing 70 –0,01.
>>> Special plates upon request.

Material:
l Grey cast iron GG
Ref. No. kg System
1104.300 42 V70
1104.400 53 V70
1104.500 108 V70
T-slot Systems
3 EH 1104.300 -
EH 1104.500
Supporting
Plates
including accessories
www.halder.com 27

T-slot Systems
EH 1104.700 -
EH 1104.900
Clamping
Angles
modular design
28 www.halder.com
"
Ref. No. kg System
1104.700 123 V70
1104.800 174 V70
1104.900 299 V70

Material:
l Grey cast iron, phosphatized
Ref. No. kg System
1105.200 26 V70
T-slot Systems
3 EH 1105.200
Clamping
Angles
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
www.halder.com 29

T-slot Systems
EH 1105.800 -
EH 1105.900
Coverings
for T-slots
EH 1007.400 -
EH 1108.300
Spacers
30 www.halder.com
"
"
Material:
l Aluminium
Ref. No. l g System
1105.800 500 65 V70
1105.900 1000 130 V70
Material:
l Steel, case-hardened, ground
Ref. No. d1 d2 s g System
1007.400 8,5 24,0 3 9 V40
1007.500 8,5 39,5 3 28 V40
1007.600 8,5 24,0 4 12 V40
1007.700 8,5 39,5 4 37 V40
1007.800 8,5 24,0 5 15 V40
1007.900 8,5 39,5 5 46 V40
1107.400 13,0 39,5 3 26 V70/L12
1107.500 13,0 59,5 3 63 V70/L12
1107.600 13,0 39,5 4 35 V70/L12
1107.700 13,0 59,5 4 85 V70/L12
1107.800 13,0 39,5 5 44 V70/L12
1107.900 13,0 59,5 5 107 V70/L12
1108.000 13,0 39,5 10 85 V70/L12
1108.100 13,0 59,5 10 208 V70/L12
1108.200 13,0 39,5 20 170 V70/L12
1108.300 13,0 59,5 20 416 V70/L12

Material:
l Steel, case-hardened, ground
Ref. No. b 1 l 1 b 2 b 3 l 2 h 1 h 2 h 3 d 1 g System
1010.100 40 40 10 17 13 40 6,5 12,5 8,25 280 V40
1110.100 70 70 14 24 25 70 10,0 20,0 12,25 1700 V70
Material:
l Steel, case-hardened, ground
Ref. No. b1 l1 b2 b3 n l2 h1 h2 h3 d1 d2 g System
1010.200 40 80 10 17 2 20 40 6,5 12,5 8,25 - 585 V40
1010.300 40 120 10 17 4 20 40 6,5 12,5 8,25 - 905 V40
1110.200 70 140 14 24 2 35 70 10,0 20,0 12,25 M 12 3600 V70
1110.300 70 210 14 24 4 35 70 10,0 20,0 12,25 M 12 5600 V70
T-slot Systems
3 EH 1010.100 -
EH 1110.100
Mounting
Blocks
3 EH 1010.200 -
EH 1110.300
Mounting
Blocks
www.halder.com 31

T-slot Systems
EH 1011.100 -
EH 1111.300
Mounting
Blocks
EH 1111.700 -
EH 1111.800
Intermediate
Plates
32 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. b 1 l 1 b 2 b 3 n l 2 h 1 h 2 h 3 d 1 g System
1011.100 25 40 10 17 1 20 40 6,5 12,5 8,25 147 V40
1011.200 25 40 10 17 3 20 80 6,5 12,5 8,25 340 V40
1011.300 25 40 10 17 5 20 120 6,5 12,5 8,25 530 V40
1111.100 40 70 14 24 1 35 70 10,0 20,0 12,25 810 V70
1111.200 40 70 14 24 3 35 140 10,0 20,0 12,25 1880 V70
1111.300 40 70 14 24 5 35 210 10,0 20,0 12,25 2950 V70
Material:
l Steel, case-hardened, ground
Ref. No. h g System
1111.700 20 607 V70
1111.800 30 1130 V70

Material:
l Steel, case-hardened, ground
Ref. No. b1 h1 l1 l2 l3 b2 b3 h2 h3 h4 h5 d n g System
1012.100 25 63 63 29 26 10 18 6,5 14,5 29 22 8,25 1 246 V40
1012.200 25 105 63 29 26 10 18 6,5 14,5 45 22 8,25 2 353 V40
1012.300 40 63 63 29 26 10 18 6,5 14,5 29 22 8,25 1 520 V40
1012.400 40 105 63 29 26 10 18 6,5 14,5 45 22 8,25 2 733 V40
1112.100 40 100 100 39 25 14 24 10,0 20,0 39 30 13,00 2 1000 V70
1112.200 40 180 100 39 25 14 24 10,0 20,0 39 30 13,00 5 1450 V70
1112.300 70 100 100 39 25 14 24 10,0 20,0 39 30 13,00 2 2150 V70
1112.400 70 180 100 39 25 14 24 10,0 20,0 39 30 13,00 5 3240 V70
T-slot Systems
3 EH 1012.100 -
EH 1112.400
Slotted
Clamping
Angles
www.halder.com 33

T-slot Systems
EH 1112.600 -
EH 1112.800
Intermediate
Elements
EH 1013.600 -
EH 1113.800
Clamping Bars
34 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. a° g System
1112.600 15 800 V70
1112.700 30 800 V70
1112.800 45 800 V70
Material:
l Steel, case-hardened, ground
Ref. No. l 1 b 1 b 2 b 3 h 1 h 2 h 3 l 2 l 3 n y g System
1013.600 80 24 10,3 18 30 6,5 14,5 20,0 40 1 8 300 V40
1013.700 120 24 10,3 18 30 6,5 14,5 20,0 40 2 8 450 V40
1013.800 160 24 10,3 18 30 6,5 14,5 20,0 40 3 8 600 V40
1113.600 140 40 14,3 24 50 10,0 20,0 35,0 35 2 12 1550 V70
1113.700 200 40 14,3 24 50 10,0 20,0 30,0 35 4 12 2130 V70
1113.800 300 40 14,3 24 50 10,0 20,0 27,5 35 7 12 3360 V70

Material:
l Steel, case-hardened, ground
Ref. No. l1 l2 g System
1114.000 110 69 300 V70/L12
1114.100 150 109 400 V70/L12
Material:
l Steel, blackened
Ref. No. d1 d2 d3 l1 l2 l3 s e g System
1014.500 M 8 8,4 14 26 20 8 22 25,4 55 V40
1114.500 M 12 13,0 19 44 34 12 36 40,0 280 V70/L12
Material:
l Steel, case-hardened, ground
Ref. No. g System
1115.100 750 V70
T-slot Systems
3 EH 1114.000 -
EH 1114.100
Support
Clamping Bars
3 EH 1014.500 -
EH 1114.500
Stops
3 EH 1115.100
Cylindrical
Stops
www.halder.com 35

T-slot Systems
EH 1116.000 -
EH 1116.100
Stops
EH 1020.300 -
EH 1121.500
Thrust Angles
36 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. h 1 h 2 g System
1116.000 37 28 215 V70
1116.100 57 48 310 V70
Material:
l Grey cast iron, phosphatized, ground
Ref. No. b l 1 l 2 h 1 h 2 h 3 h 4 y g System
1020.300 24,5 42 20 52 10,5 20 40 8 185 V40
1021.500 38,0 42 20 52 10,5 20 40 8 295 V40
1120.300 37,0 67 35 90 20,0 35 70 12 870 V70
1121.500 66,0 67 35 90 20,0 35 70 12 1710 V70

Material:
l Grey cast iron, phosphatized, ground
Ref. No. b h1 h3 h4
Position of
web g System
1021.600 39 75 - - left 460 V40
1021.700 39 115 77 97 left 700 V40
Material:
l Grey cast iron, phosphatized, ground
Ref. No. b h1 h3 h4 h5 h6
Position of
web g System
1120.400 37 140 69 104 - - left 1470 V70
1120.500 37 200 69 104 139 174 left 1820 V70
1121.000 37 140 69 104 - - right 1470 V70
1121.100 37 200 69 104 139 174 right 1820 V70
1121.600 66 140 69 104 - - left 2970 V70
1121.700 66 200 69 104 139 174 left 3720 V70
1122.200 66 140 69 104 - - right 2970 V70
1122.300 66 200 69 104 139 174 right 3720 V70
T-slot Systems
3 EH 1021.600 -
EH 1021.700
Thrust Angles
3 EH 1120.400 -
EH 1122.300
Thrust Angles
www.halder.com 37

T-slot Systems
EH 1029.600 -
EH 1129.600
T-Slot Centering
Blocks
EH 1030.000 -
EH 1030.300
T-Nuts
38 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. h1 h2 b1 b2 d l1 l2 g System
1029.600 13,5 8,5 15 10 M 6 38 26 36 V40
1129.600 22,0 12,7 22 14 M 10 56 34 130 V70
Material:
l Heat-treated steel, tempered, quality 10, black
Ref. No. l d g System
1030.000 15 M 6 11 V40
1030.100 15 M 8 9 V40
1030.200 30 M 6 24 V40
1030.300 30 M 8 23 V40

Material:
l Steel, case-hardened, ground
Ref. No. l1 g System
1130.400 60 150 V70
1130.600 30 50 V70
Material:
l Steel, case-hardened, ground
Ref. No. l1 l2 l3 l4 b1 b2 h1 h2 h3 h4 h5 g System
1031.100 39,6 6,6 - 32,6 15 10 13,5 7,5 8,5 4 3,5 67 V40
1031.200 13,0 6,5 - - 15 10 13,5 7,5 8,5 4 3,5 22 V40
1031.300 24,0 12,0 - - 15 10 13,5 7,5 8,5 4 3,5 42 V40
1131.100 69,0 9,5 44,5 59,5 22 14 22,0 14,0 12,7 6 6,0 280 V70
1131.200 22,0 11,0 - - 22 14 22,0 14,0 12,7 6 6,0 100 V70
Material:
l Steel, case-hardened, ground
Ref. No. l1 l2 l3 g System
1131.500 23,5 13,5 - 110 V70
1131.600 40,0 14,0 12 180 V70
1131.700 69,0 14,5 40 320 V70
T-slot Systems
3 EH 1130.400 -
EH 1130.600
T-Blocks
3 EH 1031.100 -
EH 1131.200
T-Clamping
Blocks
3 EH 1131.500 -
EH 1131.700
T-Clamping
Blocks
www.halder.com 39

T-slot Systems
EH 1032.100 -
EH 1132.100
Wrenches
EH 1132.500 -
EH 1132.800
Butt Straps
40 www.halder.com
"
"
Material:
l Steel, case-hardened
Ref. No. l1 l2 l3 WS suitable for g System
1032.100 210 103 43 5 M 6 100 V40
1132.100 250 125 50 8 M 10 200 V70
Material:
l Heat-treated steel, tempered, blackened
Ref. No. h1 h2 h3 g System
1132.500 39,7 49 - 1610 V70
1132.800 49,7 59 35 1650 V70

Material:
l Steel, blackened
Ref. No. g System
1132.900 550 V70
Material:
l Steel, blackened
Ref. No. l1 l2 g System
1133.000 69 45 330 V70
1133.200 94 70 500 V70
Material:
l Steel, case-hardened, ground
Note:
Max. torque 140 Nm, Clamping power F = 30 kN
Ref. No. g System
1137.300 4600 V70
T-slot Systems
3 EH 1132.900
Clamping
Heads
3 EH 1133.000 -
EH 1133.200
Clamping Bars
3 EH 1137.300
Clamping Vices
moveable jaw
www.halder.com 41

T-slot Systems
EH 1137.400 "
Clamping Vices
fixed jaw
EH 1138.100 "
Clamping Vices
replacement jaw, soft
EH 1138.400 "
Clamping Vices
replacement jaw, ribbed/flat
42 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. g System
1137.400 2000 V70
Material:
l Aluminium
Ref. No. g System
1138.100 75 V70
Material:
l Steel, case-hardened, blackened
Ref. No. g System
1138.400 125 V70

Material:
l Heat-treated steel, tempered
Ref. No. WS l g System
1139.400 36 300 390 V70
1139.500 55 295 930 V70
Material:
l Steel, case-hardened, ground
Ref. No. d1 d2 l WS g System
1040.300 6 15 14 13 17 V40
1040.500 10 19 14 13 23 V40
1040.700 13 19 15 17 29 V40
T-slot Systems
3 EH 1139.400 -
EH 1139.500
Wrenches
3 EH 1040.300 -
EH 1040.700
Locating Pins
www.halder.com 43

T-slot Systems
EH 1140.300 -
EH 1141.500
Locating Pins
EH 1141.600 -
EH 1143.700
Locating Pins
44 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. d 1 d 2 l 1 l 2 WS g System
1140.300 4 19 16 13,5 15 30 V70
1140.400 5 19 16 13,5 15 30 V70
1140.500 6 19 16 13,5 15 30 V70
1140.600 8 19 17 13,5 15 30 V70
1140.700 10 19 17 13,5 15 30 V70
1140.800 12 19 18 13,5 15 30 V70
1140.900 14 24 18 13,5 19 30 V70
1141.000 15 24 18 throughgoing thread 19 50 V70
1141.100 16 24 18 throughgoing thread 19 50 V70
1141.200 18 29 19 throughgoing thread 22 70 V70
1141.300 20 29 19 throughgoing thread 22 70 V70
1141.400 22 34 20 throughgoing thread 27 100 V70
1141.500 24 34 20 throughgoing thread 27 100 V70
Material:
l Steel, case-hardened, ground
Ref. No. d1 d2 l g System
1141.600 25 39 20 100 V70
1141.700 26 39 20 110 V70
1141.800 28 39 20 110 V70
1141.900 30 49 22 200 V70
1142.000 32 49 22 200 V70
1142.100 34 49 22 200 V70
1142.200 35 49 22 200 V70
1142.300 36 49 22 210 V70
1142.400 38 49 22 230 V70
1142.500 40 59 24 330 V70
1142.600 42 59 24 340 V70
1142.700 44 59 24 350 V70
1142.800 45 59 24 360 V70
1142.900 46 59 24 370 V70
1143.000 48 59 24 380 V70
1143.100 50 69 26 520 V70
1143.200 52 69 26 530 V70
1143.300 54 69 26 550 V70
1143.400 55 69 26 560 V70
1143.500 56 69 26 580 V70
1143.600 58 69 26 600 V70
1143.700 60 69 26 610 V70

Material:
l Steel, case-hardened, ground
Ref. No. d1 d2 d3 h1 h2 b l1 l2 l3 g System
1047.700 40 10 M 4 15 2,6 10 26 - 16 135 V40
1147.700 56 15 M 6 13 3,5 14 34 37 - 160 V70
Material:
l Steel, case-hardened, ground
Ref. No. b1 b2 d1 d2 h l1 l2 l3 l4 l5 g System
1047.800 25 8,5 10 M 8 15 100 88 45 23 12 215 V40
1147.800 40 13,0 15 M 12 13 160 145 80 36 20 470 V70
T-slot Systems
3 EH 1047.700 -
EH 1147.700
Intermediate
Plates
3 EH 1047.800 -
EH 1147.800
Support
Clamping Bars
www.halder.com 45

T-slot Systems
EH 1047.900 -
EH 1147.900
Supporting
Plates
EH 1048.200 -
EH 1148.300
V-Blocks
46 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. h d 1 d 2 b 1 b 2 l 1 l 2 l 3 g System
1047.900 10 8,5 M 8 25 18 51 28 12,5 74 V40
1147.900 15 13,0 M 12 40 22 76 43 20,0 230 V70
Material:
l Steel, case-hardened, ground
Ref. No. b1 d w b2 d2 d3 l1 l2 l3 h1 h2 dmin. dmax. g System
1048.200 10 20 90° 25 6,6 M 4 60 73,64 20 10 2,6 8 25 94 V40
1048.300 10 30 90° 38 6,6 M 4 66 85,21 20 10 2,6 8 44 158 V40
1148.000 14 32 120° 38 13,0 M 6 87 111,50 35 16 4,0 18 66 330 V70
1148.100 14 62 120° 68 13,0 M 6 100 148,00 35 16 4,0 18 126 690 V70
1148.200 14 32 90° 38 13,0 M 6 90 111,50 35 16 4,0 14 44 325 V70
1148.300 14 62 90° 68 13,0 M 6 104 148,00 35 16 4,0 14 83 695 V70

Material:
l Steel, case-hardened, ground
Ref. No. b1 b2 d1 h1 h2 h3 h4 h5 y g System
1048.400 10 20 50 31 13 2,6 21 17,0 6 160 V40
1148.400 14 34 88 54 22 6,0 39 26,5 12 830 V70
Material:
l Steel, case-hardened, ground
Ref. No. l 1 b 1 b 2 h 1 h 2 h 3 h 4 h 5 l 2 d d 2 y d min. d max. g System
1048.500 40 32 10 36 48,55 14,5 13 2,6 10 22 M 8 6 8 35 343 V40
1148.500 70 54 14 60 83,30 24,0 19 5,0 18 40 M 12 12 12 67 1640 V70
T-slot Systems
3 EH 1048.400 -
EH 1148.400
Locating
Segments
3 EH 1048.500 -
EH 1148.500
V-Blocks
www.halder.com 47

T-slot Systems
EH 1048.600 -
EH 1148.600
Adjustable
Rotating
Elements
"
EH 1149.000 "
Positioning
Clamping Bars
48 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. d b 1 b 2 h 1 h 2 h 3 y g System
1048.600 40 10 17 40 12,5 6,5 6 270 V40
1148.600 70 14 24 70 20,0 10,0 12 1350 V70
Material:
l Steel, case-hardened, ground
Ref. No. g System
1149.000 660 V70

Material:
l Steel, case-hardened, ground
Ref. No. b1 b2 b3 h1 h2 h3 h4 l1 l2 d y g System
1049.200 10 20 28 20 23 2,6 13 40 26 M 8 6 155 V40
1149.200 14 30 44 25 35 5,5 22 69 45 M 12 12 580 V70
Material:
l Steel, case-hardened, ground
Ref. No. l 1 l 2 l 3 l 4 l 5 b 1 b 2 b 3 h g System
1162.000 68 22 13 22 9,5 18 8 13 25 120 V70/L12
1162.100 88 38 20 26 9,5 28 16 13 25 210 V70/L12
1162.200 98 40 20 31 9,5 38 24 13 25 390 V70/L12
1162.300 108 45 20 37 11,5 48 35 17 25 480 V70/L12
Material:
l Steel, case-hardened, ground
Ref. No. b 1 b 2 d 1 d 2 d 3 l 1 l 2 l 3 l 4
min.
h 1
max.
h 1 h 2 h 3 g System
1163.000 28 13 9,9 24 32 88 74 25 24 36 45 22 16 390 V70/L12
1163.100 38 13 16,9 30 42 108 89 40 27 44 54 26 20 785 V70/L12
1163.200 48 17 24,8 45 55 108 84 25 27 54 68 32 26 1425 V70/L12
1163.300 58 17 34,9 52 68 128 99 40 27 68 82 44 38 2550 V70/L12
T-slot Systems
3 EH 1049.200 -
EH 1149.200
Positioning
Clamping Bars
twin faced
3 EH 1162.000 -
EH 1162.300
Fixed Drilling
Supports
3 EH 1163.000 -
EH 1163.300
Adjustable
Drilling
Supports
www.halder.com 49

T-slot Systems
EH 1068.100 -
EH 1068.300
Adaptor Slot
Clamping
Elements
System V40/V70
"
EH 1068.600 "
Adaptor Slot
Centering
Blocks
System V40/V70
EH 1068.800 "
Adaptor Slot
Blocks
System V40/V70
50 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. l1 l2 l3 g System
1068.100 39,6 6,8 32,8 110 V40/V70
1068.200 13,0 6,5 - 42 V40/V70
1068.300 24,0 12,0 - 80 V40/V70
Material:
l Steel, case-hardened, ground
Ref. No. g System
1068.600 81 V40/V70
Material:
l Steel, case-hardened, ground
Ref. No. g System
1068.800 8 V40/V70

Slot spacing 70 –0,01.
>>> Special plates upon request.

T-slot Systems
EH 1076.400 "
Clamping
Angles
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
52 www.halder.com
>>> Special plates upon request.

T-slot Systems
www.halder.com 53

T-slot Systems
54 www.halder.com

Hole and Dowel Systems
www.halder.com

Hole and Dowel Systems
EH 1500.200 -
EH 1600.900
Base Plates
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
56 www.halder.com
"
>>> Special plates upon request.

Special plates upon request.

Hole and Dowel Systems
EH 1505.200 -
EH 1605.400
Clamping
Angles
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
58 www.halder.com
"
Material:
l Grey cast iron, phosphatized
Ref. No. l b h l1 l2 l3 d1 d2 y n
Number of
hole
rows kg System
1505.200 230 98 415 75 175 - 12 M 12 12 4 2·7 19,0 L12
1505.400 300 148 515 75 175 275 12 M 12 12 6 3·9 38,5 L12
1605.200 230 98 415 75 175 - 16 M 16 16 4 2·7 18,5 L16
1605.400 300 148 515 75 175 275 16 M 16 16 6 3·9 38,0 L16

Material:
l Grey cast iron, phosphatized
Ref. No. kg System
1605.700 76 L16
Hole and Dowel Systems
3 EH 1605.700
Clamping
Angles
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
www.halder.com 59

Hole and Dowel Systems
EH 1506.200 -
EH 1606.800
Clamping
Angles
Shape and positioning tolerance
(for all Halder Jig and Fixture
Systems)
Positioning
tolerance: 0 - 500 mm – 0,01
Parallelism: on 500 mm 0,01
Angle
precision: on 300 mm 0,01
60 www.halder.com
"
>>> Special plates upon request.

Special plates upon request.

Hole and Dowel Systems
EH 1510.100 -
EH 1610.100
Consoles
EH 1510.200 -
EH 1610.200
Consoles
62 www.halder.com
"
"
Material:
l Grey cast iron, phosphatized
Ref. No. b d 1 d 2 g System
1510.100 78 12 M 12 8000 L12
1610.100 98 16 M 16 9800 L16
Material:
l Grey cast iron, phosphatized
Ref. No. b d1 d2 l1 kg System
1510.200 78 12 M 12 - 14,5 L12
1610.200 98 16 M 16 60 17,5 L16

Material:
l Grey cast iron, phosphatized
Ref. No. l1 l2 l3 d1 d2 y g System
1511.500 74 35 50 12 M 12 12 5950 L12
1611.500 79 40 55 16 M 16 16 6395 L16
Hole and Dowel Systems
3 EH 1511.500 -
EH 1611.500
Clamping
Angles
www.halder.com 63

Hole and Dowel Systems
EH 1512.000 -
EH 1612.400
Mounting
Elements
EH 1513.600 -
EH 1613.800
Clamping Bars
64 www.halder.com
"
"
Material:
l Grey cast iron, ground
Ref. No. l h d1 d2 y g System
1512.000 74,8 40 12 M 12 12 1600 L12
1512.100 74,8 40 12 M 12 12 1370 L12
1612.200 90,0 50 16 M 16 16 2200 L16
1612.400 90,0 50 16 M 16 16 2200 L16
Material:
l Steel, case-hardened, ground
Ref. No. l1 b1 h n n1 n2 t1 t2 y g System
1513.600 150 40 40 2 14,3 24 10 20 12 1200 L12
1513.700 200 40 40 3 14,3 24 10 20 12 1700 L12
1613.700 200 60 50 3 18,3 30 12 24 16 3300 L16
1613.800 300 60 50 5 18,3 30 12 24 16 5000 L16

Material:
l Steel, blackened
Note:
For the L-12 hole and dowel system the abutment 1114.500 is used.
Ref. No. g System
1614.500 900 L16
Material:
l Steel, blackened
Ref. No. l1 l2 h1 h2 h3 h4 h5 h6 y d g System
1514.700 74,8 30 25 80 65 40 12,0 67,0 12 M 12 1800 L12
1614.700 90,0 35 30 90 75 50 12,5 72,5 16 M 16 2770 L16
Hole and Dowel Systems
3 EH 1614.500
Stops
3 EH 1514.700 -
EH 1614.700
Clamping
Heads
www.halder.com 65

Hole and Dowel Systems
EH 1617.400 -
EH 1617.900
Spacers
EH 1520.400 -
EH 1621.700
Stop Angles
66 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Note:
For the L-12 hole and dowel system the disks 1107.400 - 1108.300 are used.
Ref. No. d s g System
1617.400 39,5 3 22 L16
1617.500 59,5 3 59 L16
1617.600 39,5 4 31 L16
1617.700 59,5 4 81 L16
1617.800 39,5 5 40 L16
1617.900 59,5 5 103 L16
Material:
l Grey cast iron, phosphatized, ground
Ref. No. b h d 1 d 2
Number of
threads g System
1520.400 37 140 12 M 12 4 1700 L12
1520.500 37 200 12 M 12 6 2400 L12
1621.600 66 140 16 M 16 4 2900 L16
1621.700 66 200 16 M 16 6 3600 L16

Material:
l Steel, blackened
Ref. No. l1 b1 l2 h y g System
1533.000 74 30 50,0 15 12 350 L12
1533.200 95 30 70,3 15 12 500 L12
1633.000 85 35 50,0 14 16 470 L16
1633.200 105 35 70,3 14 16 630 L16
Material:
l Heat-treated steel, tempered, quality 10.9
Ref. No. g System
1644.000 40 L16
Material:
l Steel, case-hardened, ground
Ref. No. l 1 l 2 l 3 l 4 b 1 b 2 b 3 s d g System
1547.900 76 63 13 26 22 40 13 15 M 12 195 L12
1647.900 100 83 21 33 34 60 17 20 M 16 570 L16
Hole and Dowel Systems
3 EH 1533.000 -
EH 1633.200
Clamping Bars
3 EH 1644.000
Thread Bolts
3 EH 1547.900 -
EH 1647.900
Supporting
Plates
www.halder.com 67

Hole and Dowel Systems
EH 1548.100 -
EH 1648.100
V-Blocks
68 www.halder.com
"
Material:
l Steel, case-hardened, ground
Ref. No. l1 h1 h2 d1 d2 d3 dmin. dmax. g System
1548.100 78 40 115 12 M 12 60 18 148 1230 L12
1648.100 98 35 152 16 M 16 100 18 190 1440 L16

Material:
l Steel, case-hardened, ground
Ref. No. d1 d2 h y g System
1548.500 12 M 12 24 12 3000 L12
1648.500 16 M 16 25 16 2900 L16
Material:
l Steel, case-hardened, ground
Ref. No. b1 d1 s a V-Block element g System
1548.700 48 12 18 15 right 1300 L12
1548.800 48 12 18 15 left 1300 L12
1648.700 53 16 20 17 right 1500 L16
1648.800 53 16 20 17 left 1500 L16
Hole and Dowel Systems
3 EH 1548.500 -
EH 1648.500
V-Blocks
3 EH 1548.700 -
EH 1648.800
V-Block
Elements
right/left
www.halder.com 69

Hole and Dowel Systems
EH 1549.200 -
EH 1649.200
Positioning
Clamping Bars
EH 1550.000 -
EH 1650.000
Supporting
Bars
70 www.halder.com
"
"
Material:
l Steel, case-hardened, ground
Ref. No. l1 b1 h b2 h1 h2 d1 d2 y g System
1549.200 78 50 37 30 25 24 12 M 12 12 800 L12
1549.400 78 50 57 30 45 24 12 M 12 12 1300 L12
1649.200 90 60 45 40 35 25 16 M 16 16 1440 L16
Material:
l Steel, case-hardened, ground
Ref. No. l 1 b 1 h l 2 l 3 b 2 b 3 h 1 d g System
1550.000 120 40 20 25 75 13 20 7,5 M 12 500 L12
1650.000 140 60 30 30 80 17 26 13,0 M 16 1460 L16

Material:
l Steel, case-hardened, ground
Ref. No. l1 l2 d d1 y g System
1551.500 50 24 40 12 12 400 L12
1551.700 70 24 40 12 12 550 L12
1651.500 60 25 50 16 16 730 L16
1651.700 90 25 50 16 16 1070 L16
Material:
l Steel, case-hardened, ground
Ref. No. h 1–0,01 h 2 d d 1 d 2 h 3 y g System
1553.500 25 36 40 12 54 24 12 500 L12
1653.500 35 46 50 16 70 25 16 1095 L16
Hole and Dowel Systems
3 EH 1551.500 -
EH 1651.700
Cylindrical
Stops
3 EH 1553.500 -
EH 1653.500
Positioning
Clamping
Cylinders
www.halder.com 71

Hole and Dowel Systems
EH 1555.500 -
EH 1655.500
Position Screws
EH 1557.000 -
EH 1657.000
Screw Plugs
72 www.halder.com
"
"
Material:
l Heat-treated steel, tempered, quality 10.9
Ref. No. d1 l1 d l2 l3 g System
1555.500 M12 53 12 18 65 60 L12
1655.500 M 16 64 16 24 80 130 L16
Material:
l Plastic
Ref. No. d l1 l2 g System
1557.000 M 12 25 10 5 L12
1657.000 M16 30 12 10 L16

Combi Parts
www.halder.com

Combi Parts
EH 1580.000 "
System Adaptor
Plates
(T-slot section)
EH 1581.000 "
System Adaptor
Plates
(T-slot cross
section)
EH 1681.000 "
System Adaptor
Plates
74 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. g System
1580.000 2400 L12
Material:
l Steel, case-hardened, ground
Ref. No. g System
1581.000 1200 L12
Material:
l Steel, case-hardened, ground
Ref. No. g System
1681.000 3050 L16

Multiple Clamping Systems
www.halder.com

Multiple Clamping Systems
EH 1582.000 -
EH 1582.100
Clamping Bars
"
EH 1582.400 "
Step Blocks
76 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. l1 l2 l3 l4 l5 l6 g
1582.000 250 100 70 - - - 3200
1582.100 370 100 60 80 130 150 4700
Material:
l Steel, blackened
Ref. No. g
1582.400 33

Material:
l Steel, case-hardened, ground
Ref. No. g
1582.500 55
Material:
l Steel, case-hardened, ground
Ref. No. b g
1582.600 35 280
1582.700 40 330
Material:
l Steel, case-hardened, ground
Ref. No. b1 b2 (d1) b3 (d2) l1 l2 d1 min. d1 max. d2 min. d2 max. g
1582.800 35 24,04 (20) 24,53 (20) 1,5 1,5 3 34 3 31 210
1582.900 40 26,55 (20) 27,05 (20) 1,5 1,5 3 34 3 31 290
1583.000 35 27,60 (30) 29,45 (30) 9,2 4,5 18 50 9 37 210
1583.100 40 30,10 (30) 31,95 (30) 9,2 4,5 18 50 9 37 270
Multiple Clamping Systems
3 EH 1582.500
Fixing Bars
3 EH 1582.600 -
EH 1582.700
Jaws
flat
3 EH 1582.800 -
EH 1583.100
Prismatic Jaws
www.halder.com 77

Multiple Clamping Systems
EH 1583.200 "
Jaws
ribbed
EH 1583.300 "
Jaws
soft
EH 23250. "
Taper Clamping
Units
78 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. g
1583.200 310
Material:
l Steel
Ref. No. g
1583.300 370
Material:
Body: l Tool steel, hardened, bright Clamping jaws: l Tool steel, hardened, blackened and ground
Ref. No. Finish
23250.0012 single taper,
ribbed clamping jaw
Clamping
force
kN
Torque moment
Nm g
30 85 226

Material:
l Heat-treated steel, tempered, quality 10.9
Ref. No. g
1583.400 52
Ref. No. comprising Ref. No.
1583.500 1 piece Clamping bar
1 piece Fixing bar
2 piece Jaw, flat
1 piece Taper clamping unit
3 pieces T-nut
1583.600 1 piece Clamping bar
1 piece Fixing bar
2 piece Jaw, flat
1 piece Taper clamping unit
3 pieces T-nut
Material:
l Steel, case-hardened, blackened, ground
1582.000
1582.500
1582.600
23250.0012
23010.0142
1582.100
1582.500
1582.700
23250.0012
23010.0142
Ref. No. g
1584.000 280
Multiple Clamping Systems
3 EH 1583.400
Position Screws
3 EH 1583.500 -
EH 1583.600
Clamping Units
3 EH 1584.000
Down-Hold
Clamps
www.halder.com 79

80 www.halder.com

Basic Elements
www.halder.com

Basic Elements
EH 1901. "
Pallets
DIN 55 201-A1
82 www.halder.com
>>> Special plates upon request.

Special plates upon request.

Basic Elements
EH 1906. /
EH 1907.
Clamping
Angles
semi-finished
84 www.halder.com
"
>>> Special plates upon request.

Special plates upon request.

Basic Elements
EH 1908. "
Clamping
Cubes
semi-finished
86 www.halder.com
>>> Special plates upon request.

Special plates upon request.

Basic Elements
EH 1910. "
Clamping
Angles
welded, semi-finished
88 www.halder.com
>>> Special plates upon request.

Special plates upon request.

Basic Elements
EH 1912. "
Base Plates
semi-finished
EH 1912. "
Base Plates
with positioning holes
90 www.halder.com
>>> Special plates upon request. > Special plates upon request.

Zero-Point Clamping Systems
www.halder.com

Built-in double acting
connecting elements
Holding force of 30 kN
Built-in single acting
connecting elements
Holding force of 20 kN
92 www.halder.com
Halder Zero-point Clamping Systems
Coupling elements for clamping and at the same time centring jigs
and fixtures, developed as a quick-change system for shortening
set-up times.
• Referenced clamping of jigs and fixtures provided by repeatedly
accurate placement at the "zero-point".
• For machining workpieces in several working steps on different
machines.
In addition to the maximum of flexibility provided by Halder Zeropoint
Clamping Systems – be this hydraulic operation in a built-in
version with integrated lifting of the jigs and fixtures or through a
modular design – the way the system is designed (with the peg of
the base element mounted pointing upwards and the connecting
ring integrated on the jig) guarantees a high degree of production
reliability, continuous accuracy, and soiling of the reference point
is avoided.
… Holding force of up to 30 kN
… mechanical, pneumatic and hydraulic operation
… also with locking device against twisting
when using individual elements
… high efficiency, repeatedly accurate and cost-saving
… can be used on all machinery
… can also be integrated in Halder Jig and Fixture Systems
Connecting rings suited for all Halder
Zero-point Clamping Systems
Modular connecting elements
Holding force up to 10 kN
Control modules
interchangeable

Designs of the Zero-Point
Clamping Systems
Hydraulic, double acting, built-in
connecting element
Holding force of 30 kN
- Hydraulic clamping and centring.
- Releasing and lifting with integrated
retraction cylinder, hydraulic.
- Suited for automation.
- Integrated pneumatic blow-out of
the supporting surfaces.
- Pneumatic sensing check on the
supporting surface during clamping.
- Can be integrated in base plates,
angles, cubes, etc.
Hydraulic, single-acting, built-in
connecting element
Holding force of 20 kN
- Clamping and centring by spring load.
- Releasing and lifting with integrated
retraction cylinder, hydraulic.
- Suited for automation.
- Can be integrated in base plates,
angles, cubes, etc.
Modular connecting element
Holding force of up to 10 kN
- Clamping and centring by spring load.
- Release: mechanical, pneumatic, hydraulic.
(Control modules interchangeable).
- Can be integrated in base plates,
angles, cubes, etc.
- Provided with screw thread for bolting to
tables, plates, etc.
Designs of the connecting rings:
The connecting rings are suited for all Halder
Zero-Point Clamping Systems.
Can be bolted to and integrated on jigs and
fixtures or directly on the workpiece.
The connecting rings are split into the following
designs for positioning and simultaneous
clamping of jigs and fixtures:
1. "Centrical" connecting ring for aligning
and clamping at the zero-point.
2. "Sword-shaped" connecting ring for
two-point placement for alignment in
one axial direction.
3. "Floating" connecting ring without
centring function for over-determined
additional clamping.
Functional Principle:
clamp and lift-off
Mounting principle
Machine table:
Base plate with 4
connecting elements
www.halder.com
93

94
Set-up costs
in euros
25.000
20.000
15.000
10.000
5.000 4.667
Example:
www.halder.com
Time is Money
Halder Zero-point Clamping Systems are a worthwhile investment that pay off
within a very short period of time through simpler retooling procedures, less
downtime for machinery and nearly unlimited flexibility.
Make the comparison yourself as to the cost advantages obtained using Halder
Zero-point Clamping Systems.
Compare production time / set-up time
WITH the Halder Zero-point Clamping System WITHOUT the Halder Zero-point Clamping System
Production Machinery down-time Production Machinery down-time
Cost comparison of set-up costs with and without the Halder Zero-point Clamping System
Basis: 200 working days per year at ¤ 70.00/hr
9.333
14.000
18.667
467 933 1.400 1.867
23.333
2.333
1 2 3 4 5
Calculation of amortisation time
With five retooling procedures/shift/machine
Without the Halder Zero-point Clamping System: 5 x ~20 Min. = 100 Min.
With the Halder Zero-point Clamping System: 5 x ~2 Min. = 10 Min.
WITHOUT
the Halder Zero-point Clamping System
This difference is your profit
WITH
the Halder Zero-point Clamping System
Retooling procedures
day/machine
Saving/shift/net = 90 Min.
Saving/year/200 working days = 300 h
Cost advantage/year at ¤ 70.00/hr
= EUR 21.000.

Zero-Point Clamping Systems
3 EH 1990.
Overview
Zero-Point
Clamping
Systems
www.halder.com 95

Zero-Point Clamping Systems
EH 1990. "
Connecting
Elements
hydraulically operated,
double acting, with lifting-off
and blow-out
96 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No.
Holding force
N
Centering accuracy
mm
Release pressure
bar
max. g
1990.070 30.000

Material:
l Steel, case-hardened, ground
Ref. No.
Holding force
N
Centering accuracy
mm
Release pressure
bar
max. g
1990.080 20.000

Zero-Point Clamping Systems
EH 1990. "
Connecting
Elements
modular, mechanically
operated
EH 1990. "
Connecting
Elements
modular, hydraulically
operated
98 www.halder.com
Material:
Body: l Steel, case-hardened, ground Control module: l Steel, blackened
Ref. No.
Holding force
N
Centering accuracy
mm
Release moment
Nm g
1990.100 10.000

Material:
Body: l Steel, case-hardened, ground Control module: l Aluminium
Ref. No.
Holding force
N
Centering accuracy
mm
Release pressure
bar g
1990.102 5.000

Zero-Point Clamping Systems
EH 1990. "
Connecting
Rings
EH 1990. "
Coverings
for connecting elements
100 www.halder.com
Material:
l Steel, case-hardened, ground
Ref. No. Finish g
1990.105 centrical 680
1990.106 floating 670
1990.107 sword-shaped 670
1990.108 centrical, secured against twisting 670
Material:
l Plastic
Ref. No. g
1990.114 70

Special plates upon request.

Zero-Point Clamping Systems
EH 1990. "
Base Plates
with 2 connecting elements
102 www.halder.com
>>> Special plates upon request.

Special plates upon request.

Zero-Point Clamping Systems
EH 1990. "
Base Plates
with 4 connecting elements
104 www.halder.com
>>> Special plates upon request.

Special plates upon request.

Zero-Point Clamping Systems
EH 1990. "
Base Plates
with 4 double acting
connecting elements
106 www.halder.com
>>> Special plates upon request.

Special plates upon request.

Zero-Point Clamping Systems
EH 1990. "
Base Plates
with 4 single acting
connecting elements
108 www.halder.com
>>> Special plates upon request.

Special plates upon request. > Special plates upon request.

Zero-Point Clamping Systems
110 www.halder.com

Note:
Pressure intensifiers - also called pressure converters - are used to convert compressed air into hydraulic pressure
and can be used on all hydraulically operated zero-point clamping systems.
Pressure intensifiers are normally applied if compressed air is already available for a machine or a device. They are
an alternative for conventional hydraulic power units.
A hydraulic hose at a length of 1.5 m is included.
Ref. No. Description
System pressure
bar
Oil volume
l
Pneumatic pressure
bar suitable for kg
1991.074 KOLOSS 80 0,3 6 EH 1990. 13
Zero-Point Clamping Systems
3 EH 1991.
Pressure
Intensifier
www.halder.com 111

112
www.halder.com
Application sample showing EH 1990.080
clamping element, hydraulically operated,
single acting with lift-off
This sample shows the application of a zero-point clamping
system on a machine center.
Picture 1
The base plate with the clamped work piece is being put
onto the zero-point clamping system by means of a crane.
Example:
Multifunctional base plate with 9 clamping elements for the
use of different supporting plates, i.e. with 2, 3 or 4 clamping
rings.
Picture 2
Easy insertion of the base plate due to:
• Alignment by means of a critical taper
on both the base plate and the counter
piece, i.e. clamping ring.
• Base plate is supported by a retractable
rest pad, plate is lowered 5 mm into
position (when releasing, the base plate
will be re-lifted by 5 mm).
Lowering, centering and clamping is achieved
simultaneously by releasing the hydraulic
pressure.
Picture 3
The work piece is now ready for machining.
3
1
2

Standard Parts for Workholding Systems
www.halder.com

Standard Parts
EH 22290. "
C-Washers
DIN 6372
EH 22540. "
Grub Screws
DIN 6332 with thrust point
form S
114 www.halder.com
Material:
l Heat-treated steel, tempered, blackened
Ref. No. Size b d1 d2 l s g System
22290.0008 8 8,4 28 21 1,0 7 22 V40
22290.0012 12 13,0 40 30 1,8 9 58 V70/L12
22290.0016 16 17,0 56 37 1,8 12 165 V70/L16
Material:
l Steel, quality 5.8, blackened; thrust point hardened
Ref. No. d 1 l 1
d 2
h11 d 3 z 2 z 3 WS g System
22540.0381 M 8 40 6 5,4 7,5 3,0 4 11,8 V40
22540.0382 M 8 60 6 5,4 7,5 3,0 4 18,1 V40
22540.0401 M 10 60 8 7,2 9,0 4,5 5 27,5 V70
22540.0421 M 12 60 8 7,2 10,0 4,5 6 40,0 V70/L12
22540.0422 M 12 80 8 7,2 10,0 4,5 6 55,0 V70/L12
22540.0423 M 12 100 8 7,2 10,0 4,5 6 69,0 V70/L12
22540.0462 M 16 100 12 11,0 12,0 5,0 8 126,0 V70/L16
22540.0463 M 16 125 12 11,0 12,0 5,0 8 160,0 V70/L16

Material:
l Free cutting steel, case-hardened, blackened
Ref. No. h–0,1 d 1 d 2 b e WS g System
22680.0142 20 M 8 9 10 15,0 13 15 V40
22680.0144 25 M 8 9 10 15,0 13 20 V40
22680.0184 25 M 12 13 15 21,9 19 40 V70/L12
22680.0186 30 M 12 13 15 21,9 19 48 V70/L12
22680.0188 40 M 12 13 15 21,9 19 70 V70/L12
Material:
l Heat-treated steel, tempered, blackened
l Support surface induction hardened and ground
Ref. No. Finish
l 1
– 0,01 d1 d2 l2 t d3 WS g System
22680.0462 with female thread 30 M 8 4 13 10 14,4 13 14 V40
22680.0464 with female thread 40 M 8 4 18 14 14,4 13 18 V40
22680.0486 with female thread 40 M 12 8 18 12 21,2 19 40 V70/L12
22680.0488 with female thread 60 M 12 8 28 18 21,2 19 67 V70/L12
Standard Parts
3 EH 22680.
Seating Pins
ribbed
3 EH 22680.
Seating Pins
pin-shaped
www.halder.com 115

Standard Parts
EH 22690. "
Screwed Rest
Buttons
116 www.halder.com
Material:
l Steel, case-hardened, blackened
Ref. No.
plain
picture 1
Ref. No.
spherical
picture 2
Ref. No.
ribbed
picture 3 l 1 d d 1 d 2 l 2 t WS g System
22690.0021 22690.0121 22690.0221 10 M 8 17 19,4 20 - 17 24 V40
22690.0001 22690.0101 22690.0201 10 M 12 22 25,2 24 - 22 40 V70/L12
22690.0002 22690.0102 22690.0202 15 M 12 22 25,2 29 - 22 56 V70/L12
22690.0042 22690.0142 22690.0242 15 M 16 30 34,5 34 - 30 130 L16
22690.0043 22690.0143 22690.0243 20 M 16 30 34,5 39 - 30 155 L16
Ref. No.
plain
picture 4
Ref. No.
spherical
picture 5
Ref. No.
ribbed
picture 6 l1 d d1 d2 l2 t WS g System
22690.0321 22690.0421 22690.0521 15 M 8 17 19,4 - 6 17 23 V40
22690.0323 22690.0423 22690.0523 25 M 8 17 19,4 - 12 17 40 V40
22690.0301 22690.0401 22690.0501 20 M 12 22 25,2 - 10 22 52 V70/L12
22690.0302 22690.0402 22690.0502 25 M 12 22 25,2 - 15 22 65 V70/L12
22690.0303 22690.0403 22690.0503 30 M 12 22 25,2 - 18 22 77 V70/L12
22690.0304 22690.0404 22690.0504 40 M 12 22 25,2 - 18 22 105 V70/L12
22690.0305 22690.0405 22690.0505 50 M 12 22 25,2 - 18 22 135 V70/L12
22690.0343 22690.0443 22690.0543 30 M 16 30 34,5 - 20 30 140 L16
22690.0345 22690.0445 22690.0545 50 M 16 30 34,5 - 24 30 250 L16

Material:
Screw: l Heat-treated steel, 1200–100 N/mm 2 Ball: l Ball-bearing steel, hardened
Ref. No.
plain
Ref. No.
ribbed d 1
l
Nominal
length d 3
Ball
˘ WS
Load capacity
for static load
max. kN g System
22700.0584 – M 8 20 4,5 5,5 4 9 5,7 V40
22700.0624 22700.0724 M 12 30 7,2 8,5 6 18 19,6 V70/L12
22700.0626 22700.0726 M 12 40 7,2 8,5 6 18 28,5 V70/L12
22700.0666 22700.0766 M 16 50 10,7 12,0 8 36 48,0 V70/L16
Material:
Body: l Heat-treated steel, tempered, phosphated Ball: l Ball-bearing steel, hardened, bright
Ref. No.
plain
picture 1
Ref. No.
ribbed
picture 2 d1 d2 d3 l1 l2
Ball
˘ WS
Load capacity
for static load
max. kN g System
22730.0013 22730.0313 13 M 8 7,2 13 8 10 11 10 13 V40
22730.0020 22730.0320 20 M 12 10,5 18 12 16 17 25 40 V70/L12
22730.0030 22730.0330 30 M 16 20,0 27 16 25 27 90 100 V70/L16
Material:
Body: l Heat-treated steel,
tempered, phosphated
Ref. No.
plain
picture 1
Ball: l Ball-bearing steel,
hardened, bright
Ref. No.
ribbed
picture 2 WS d 1 l l 1 d 2 e
Nut: l Steel, blackened (ISO 4035)
Ball
˘
Load capacity
for static load
kN max. g System
22740.0013 22740.0313 13 M 8 36,6 25 5,5 15,0 8 8 25 V40
22740.0016 22740.0316 17 M 10 45,7 30 8,6 19,6 12 8 55 V70
22740.0017 22740.0317 17 M 12 50,7 35 8,6 19,6 12 15 55 V70/L12
22740.0024 22740.0324 24 M 16 60,7 40 10,5 27,7 16 25 115 V70/L16
Standard Parts
3 EH 22700.
Ball-Ended
Thrust Screws
ball secured against rotating
3 EH 22730.
Self-Aligning
Pads
3 EH 22740.
Self-Aligning
Pads
adjustable
www.halder.com 117

Standard Parts
EH 23010. "
T-Nuts
DIN 508
EH 23020. "
T-Nuts
>extended<
EH 23020. "
T-Nuts
>Rhombus<
118 www.halder.com
Material:
l Heat-treated steel, tempered, quality 10, blackened
Ref. No. d T-slot size a e h k g System
23010.0145 M 8 14 13,6 22 16 8 34 V70
23010.0144 M 10 14 13,6 22 16 8 34 V70
23010.0142 M 12 14 13,6 22 16 8 34 V70
23010.0182 M 16 18 17,6 28 20 10 68 L16
Material:
l Heat-treated steel, tempered, quality 10, blackened
Ref. No. d T-slot size a e l h k g System
23020.0140 M 12 14 13,6 22 44 16 8 82 V70
23020.0180 M 16 18 17,6 28 56 20 10 170 L16
Material:
l Heat-treated steel, tempered, quality 10, blackened
Ref. No. d T-slot size a e h k g System
23020.0640 M 12 14 13,6 22 16 8 20 V70

Material:
l Heat-treated steel, tempered, quality 8.8, black
Ref. No. d l b 1 b 2 g System
23040.0582 M 8 63 20 40 20 V40
23040.0583 M 8 100 20 63 30 V40
23040.0584 M 8 160 20 100 45 V40
23040.0602 M10 80 25 50 40 V70
23040.0603 M 10 100 25 75 50 V70
23040.0604 M 10 125 25 75 65 V70
23040.0605* M 10 160 25 100 80 V70
23040.0606 M 10 200 25 125 100 V70
23040.0622 M 12 63** - - 50 V70/L12
23040.0623 M 12 80** - - 60 V70/L12
23040.0624* M 12 100 30 63 70 V70/L12
23040.0625 M 12 125 30 75 90 V70/L12
23040.0626 M 12 160 30 100 115 V70/L12
23040.0627 M 12 200 30 125 140 V70/L12
23040.0662 M 16 80** - - 105 V70/L16
23040.0664 M 16 125 40 63 130 V70/L16
23040.0665 M 16 160 40 75 210 V70/L16
23040.0666* M 16 200 40 100 260 V70/L16
23040.0667 M 16 250 40 125 325 V70/L16
* DIN standards do not include these dimensions.
** Throughgoing thread
Material:
Spherical washer: l Case-hardened steel, case hardened Conical seat: l Heat-treated steel, tempered
Ref. No.
picture 1
Ref. No.
picture 2
d 1
H13
d 2
H13 d3 d4 d5 h1 h2 h3 r1
g
picture 1
g
picture 2 System
23050.0008 23050.0208 8,4 9,6 17 24 14,5 0,6 3,2 5 12 2,5 13,5 V40
23050.0010 23050.0210 10,5 12,0 21 30 18,5 0,8 4,0 5 15 5,0 21,0 V70
23050.0012 23050.0212 13,0 14,2 24 36 20,0 1,1 4,6 6 17 7,3 38,0 V70/L12
23050.0016 23050.0216 17,0 19,0 30 44 26,0 1,3 5,3 7 22 12,7 64,0 V70/L16
Standard Parts
3 EH 23040.
Studs
DIN 6379 b1 long
for T-Nuts
3 EH 23050.
Spherical
Washers
Conical Seats
DIN 6319
www.halder.com 119

Standard Parts
EH 23060. "
Plain Washers
DIN 6340 heat-treated
EH 23070. "
Fixture Nuts
DIN 6330
(height 1,5 d)
EH 23080. "
Collar Nuts
DIN 6331
(height 1,5 d)
120 www.halder.com
Material:
l Heat-treated steel, tempered, punched, mechanically trued, phosphatized
Ref. No. d 1 d 2 s
For screws
with threads g System
23060.0008 8,4 23 4 M 8 11 V40
23060.0010 10,5 28 4 M 10 16 V70
23060.0012 13,0 35 5 M 12 30 V70/L12
23060.0016 17,0 45 6 M 16 60 V70/L16
Material:
l Heat-treated steel, tempered, quality 10, phosphated
Ref. No. d 1 d 2 e m r WS g System
23070.0008 M 8 9,0 15,0 12 11 13 9 V40
23070.0010 M 10 11,5 19,6 15 15 16 20 V70
23070.0012 M 12 14,0 21,9 18 17 18 28 V70/L12
23070.0016 M 16 18,0 27,7 24 22 24 58 V70/L16
Material:
l Heat-treated steel, tempered, quality 10, phosphated
Ref. No. d 1 a d 2 e m WS g System
23080.0008 M 8 3,5 18 15,0 12 13 12 V40
23080.0010 M 10 4,0 22 19,6 15 16 25 V70
23080.0012 M 12 4,0 25 21,9 18 18 35 V70/L12
23080.0016 M 16 5,0 31 27,7 24 24 68 V70/L16

Material:
l Heat-treated steel, tempered, blackened
Ref. No. d1 d2 m WS g System
23080.0508 M 8 17 14,0 13 12 V40
23080.0510 M 10 21 17,5 16 27 V70
23080.0512 M 12 24 21,5 18 38 V70/L12
23080.0516 M 16 30 28,0 24 68 V70/L16
Material:
l Heat-treated steel, tempered, quality 10, phosphated
Ref. No. d 1 e m WS g System
23090.0008 M 8 15,0 24 13 19 V40
23090.0010 M 10 19,6 30 16 42 V70
23090.0012 M 12 21,9 36 18 63 V70/L12
23090.0016 M 16 27,7 48 24 120 V70/L16
Material:
l Steel, case-hardened, blackened, ground
Ref. No.
T-slot size
machine
b
h6 d1
For screws
ISO 1207
ISO 4762 g System
23110.0112 12 30 M6·10 38 V40/V70/L12/L16
23110.0114 14 30 M6·16 41 V40/V70/L12/L16
23110.0116 16 30 M6·16 43 V40/V70/L12/L16
23110.0118 18 30 M6·16 45 V40/V70/L12/L16
23110.0120 20 36 M6·16 56 V40/V70/L12/L16
Standard Parts
3 EH 23080.
Collar Nuts
with
Conical Seat
3 EH 23090.
Extension Nuts
(height 3 d)
3 EH 23110.
Fixed Slot
Tenons
with cylindrical fastening
www.halder.com 121

Standard Parts
EH 23110. "
Centering Pins
EH 23120. "
Loose Slot
Tenons
DIN 6323
EH 23150. "
Clamps
DIN 6315 B forked
122 www.halder.com
Material:
l Alloyed case-hardened steel, case hardened, blackened, ground
Ref. No. picture d h6 l g System
23110.0510 1 20 31 70 V40/V70/L12/L16
23110.0520 1 25 35 120 V70
23110.0530 1 50 31 460 V40/V70
23110.0540 1 50 45 670 V70
23110.0620 2 50 20 330 L12/L16
Material:
l Steel, case-hardened, blackened, ground
Ref. No.
T-slot size
fixture
b1 h6
T-slot size
machine
b2 h6 h1 h2 l form g System
23120.0012 20 12 14 5,5 32 A 50 V40/V70
23120.0014 20 14 14 5,5 32 A 55 V40/V70
23120.0016 20 16 14 5,5 32 A 60 V40/V70
23120.0018 20 18 14 5,5 32 A 65 V40/V70
Material:
l Heat-treated steel, varnished
Ref. No. b 1 l 1 a b 2 b 3 b 4 For screws g System
23150.0009 9 80 15 25 8 4 M 8 140 V40
23150.0014 14 125 25 38 12 6 M 12 540 V70/L12
23150.0015 14 160 25 38 12 6 M 12 690 V70/L12
23150.0016 14 200 25 38 12 6 M 12 900 V70/L12
23150.0018 18 160 30 48 15 8 M 16 1080 V70/L16
23150.0019 18 200 30 48 15 8 M 16 1360 V70/L16
23150.0020 18 250 40 48 15 10 M 16 2260 V70/L16

Material:
l Heat-treated steel, tempered, blackened
Ref. No. b1 l1 a1 a2 a3 b2 b3 l2 l3 l4
Max.
starting
torque
Nm g System
23180.0209 9 100 12 4 3,0 20 9,5 22 29 17 12 130 V40
23180.0211 11 125 15 5 3,5 25 11,5 28 36 21 30 260 V70
23180.0213 13 150 20 7 4,0 30 13,5 34 43 25 55 500 V70/L12
23180.0217 17 175 25 9 4,5 35 15,5 40 52 29 80 800 V70/L16
Material:
l Steel, case-hardened, blackened, ground
Ref. No.
Clamping
jaw
T-slot
size d1 d2 b h1 h2 l1 l2 s
F
hor.
kN max. g System
23210.0501 plain 10 M 8 8,4 32 24 20 52 28,0 3 7,0 200 V40
23210.0502 V 10 M 8 8,4 32 24 20 52 28,0 3 7,0 200 V40
23210.0521 plain 14 M 12 12,5 48 37 30 72 39,5 4 15,0 800 V70/L12
23210.0522 V 14 M 12 12,5 48 37 30 72 39,5 4 15,0 800 V70/L12
23210.0541 plain 18 M 16 16,5 68 47 35 86 41,0 7 21,5 1700 L16
23210.0542 V 18 M 16 16,5 68 47 35 86 41,0 7 21,5 1700 L16
Standard Parts
3 EH 23180.
Clamps
with nose
3 EH 23210.
Down-Hold
Clamps
without clamping lever
www.halder.com 123

Standard Parts
EH 23220. "
Bedding
Supports
124 www.halder.com
Sizes 8,5 x 75, 13 x 150 and 17 x 170 have only one slot.
Material:
Clamp: l Steel, case-hardened, blackened, ground Handle: l Zinc die-cast
Ref. No. b3 l1 l2 l3 l4 l5 l6 l7 b1 b2 d1 h1 h2 h3
Thread
stud
˘
Loadcapacity
kN max.
e
EH 24400. g Systems
23220.0085 8,5 75 35 13 - 13 62 5 30 10 M 8 19,5 3 11,5 13 0,5 18 x M6 342 V40
23220.0150 13,0 150 90 20 - 17 74 - 50 25 M 10 24,0 6 14,0 20 2,5 22 x M8 1159 V70/L12
23220.0170 17,0 170 100 25 - 27 108 11 60 20 M 16 34,0 11 21,5 26 5,0 30 x M12 2534 L16
23220.0300 13,0 300 100 30 160 17 74 - 50 25 M 10 24,0 6 14,0 20 2,5 22 x M8 2153 V70/L12

Material:
Body: l Case hardened steel, nitrided, manganese phosphate treated and ground Housing: l Aluminium
Note:
The support element is used to support additional clamping points on components.
Clamping process:
1. By turning the clamping cam (WS 6 hexagon socket) on the outer surface of the red protective sleeve, the support
pin contacts the workpiece with a slight spring load.
2. By turning on as far as possible (lock), i.e. total of 180°, the clamping mechanism locks the support pin without
moving. Thesupport element has been placed onto the workpiece and locked.
3. If turned in the opposite direction (unlock), the clamping is released. If turned back as far as possible, i.e. total of
180° thesupport pin moves to the end position.
The M 8 threaded pin on the support bolt can be replaced by various locating and seating pins (EH 22...). Customermade
extensions can also be fitted. For safe functioning, the thread bore M 12 must always be closed.
Ref. No. g System
23220.0400 939 V70/L12/L16
Standard Parts
3 EH 23220.
Supporting
Elements
www.halder.com 125

Standard Parts
EH 23280. "
Cylindrical
Stops
EH 23310. "
Down-Thrust
Clamps
size 25
126 www.halder.com
Material:
Cylindrical stop: l Steel, case-hardened,
ground
Ref. No.
b
h6
T-slot
size
l1
short
finish
–0,01
l1
long
finish
–0,2
Screw: l ISO 4762,
quality 8.8
a
-0,6
d1
–0,01 h l2
Holding plate: l Steel, blackened
Screw
ISO 4762 g System
23280.0114 14 25 - 14 32 8 9 M8·30 200 V70
23280.0214 14 - 50 14 32 8 9 M8·55 355 V70
Material:
l Case-hardened steel, case-hardened, blackened and ground
Ref. No. Size g System
23310.0025 25·35 210 V40

Material:
l Case-hardened steel, case-hardened, blackened and ground
Ref. No. d
h1
max.
h2
min.
s
Stroke h 3 h 4 g System
23310.0051 40 70 50 20 15 73 - 93 780 V70/L12
23310.0054 40 98 68 30 15 91 -121 945 V70/L12
23310.0057 40 135 95 40 22 118 -158 1160 V70/L12
Standard Parts
3 EH 23310.
Down-Thrust
Clamps
with clamping screw
size 40
www.halder.com 127

Standard Parts
EH 23310. "
Height
Adjusting
Cylinders
EH 23310. "
Positioning
Rings
for down-thrust clamp,
size 40
128 www.halder.com
Material:
l Steel, case-hardened, blackened, ground
Ref. No. d 1
l1
–0,01 d 2 WS l 2 g System
23310.0125 25 20 M 8 22 10 71 V40
23310.0126 25 40 M 8 22 20 140 V40
23310.0127 25 80 M 8 22 20 285 V40
23310.0140 40 35 M 12 36 20 305 V70/L12
23310.0141 40 70 M 12 36 20 630 V70/L12
23310.0142 40 140 M 12 36 20 1315 V70/L12
23310.0145 40 35 M 16 36 20 305 L16
23310.0146 40 70 M 16 36 20 630 L16
23310.0147 40 140 M 16 36 20 1315 L16
23310.0160 60 35 M 12 55 20 700 V70/L12
23310.0161 60 70 M 12 55 20 1440 V70/L12
23310.0162 60 140 M 12 55 20 3000 V70/L12
23310.0165 60 35 M 16 55 20 700 L16
23310.0166 60 70 M 16 55 20 1440 L16
23310.0167 60 140 M 16 55 20 3000 L16
Material:
l Steel, blackened
Ref. No. Nominal size g System
23310.0350 40 31,5 V70/L12

Material:
Body:
l Case hardened steel, nitrided,
manganese phosphate treated
and ground
Clamping jaws:
l Case hardened steel, nitrided,
manganese phosphate treated
Note:
The floating clamp is used to clamp and support additional clamping points on components.
The benefits of the floating clamp are:
l no distortion in the clamping of unstable components,
l avoids vibration during the processing,
l clamps ribs, beads and shackles to reinforce clamped components,
l distortion-free clamping of raw parts.
Housing:
l Aluminium, red anodised
Clamping Process:
1. Push the floating clamp downwards.
2. Pivot the clamping jaws in as far as possible.
The floating clamp contacts the bottom of the work piece with a slight spring load.
3. Tighten the floating clamp with a hexagonal nut (WS 18) having a min. torque of 15 Nm and a maximum torque
of 30 Nm. In the clamping process, the workpiece is clamped and simultaneously supported.
4. Releasing is done in reverse order.
Assembly and Set-Up:
1. Mount the floating clamp (M 12 connection thread) onto the device with a wrench (WS 46).
2. Adjust the height limit stop and the rotating area with the red sleeve and clamp with a set screw
(3 x WS 2.5). When setting the height limit, consider tolerance of workpiece.
Ref. No.* g System
23320.0012 1820 V70/L12/L16
* For further dimensions and types please refer to the current standard parts catalogue.
Standard Parts
3 EH 23320.
Floating
Clamps
combined clamping and
locking
M12
www.halder.com 129

Standard Parts
EH 23320. "
Clamping Jaws
for floating clamp M 12
130 www.halder.com
Material:
l Case hardened steel, nitrided, manganese phosphate treated
Note:
The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.
When using custom-made jaws, it is important to insert the tightening screw (M 8-12.9, 43 Nm) 10 mm deep into the
clamp housing on the upper clamping jaw and 9 mm deep into the clamp housing on the lower clamping jaw.
Ref. No. Finish Clamping range
23320.0050 lower standard clamping jaw
(picture 1)
23320.0052 upper standard clamping jaw
(picture 2)
23320.0054 upper exchange clamping jaw
(picture 3)
23320.0056 upper exchange clamping jaw
(picture 4)
23320.0058 upper exchange clamping jaw
(picture 5)
h 1
-0,1 h2 g System
- 26,8 - 83 V70/L12/L16
0-12 21,0 - 71 V70/L12/L16
4-16 24,5 3,5 94 V70/L12/L16
15 - 27 24,5 14,5 90 V70/L12/L16
26 - 38 35,5 25,5 132 V70/L12/L16

Material:
Body: l Heat-treated steel, black coated Clamping lever: l Heat-treated steel, tempered, silver coated
Ref. No. d1 d2 WS
h 1
min.
h 1
max. h2 h3
s
max. l1
l 2
+1 l3 l4 l5 b
Tightening
torque
max. Nm
Clamping
force
max. kN g Systems
23690.0012 M 12 M 8 16 40 60 59 95 43 134 70 50 13 10,0 45 45 15 1850 V70/L12
23690.0016 M 16 M 12 18 47 85 70 126 85 213 120 50 17 12,5 55 75 25 4340 L16
Material:
l Heat-treated steel, black coated
Ref. No. d1 l1
l 2
+1 l3 l4 h b1
b 2
H12 g System
23690.0112 M 12 134 70 50 13 20 45 14 720 V70/L12
23690.0116 M 16 213 120 50 17 35 55 18 2600 L16
Standard Parts
3 EH 23690.
Compact
Clamps
3 EH 23690.
Height
Adaptors
for compact clamp
www.halder.com 131

Standard Parts
EH 23700. "
Clamping
Element
Systems
EH 23700. "
Straight Clamps
long
132 www.halder.com
Material:
l Steel, blackened. Pull-rod: special steel. Wearing parts heat-treated.
Ref. No. axbxc b1 e f g h h1 i l n g System
23700.0012 25·25·65 35 110 20 M 12 48-78 112 12,5 40 10 800 V70/L12
23700.0016 30·30·78 40 142 30 M 16 60-96 145 14,0 50 13 1650 L16
Material:
l Heat-treated steel, tempered, blackened
Ref. No. b1 l1 a b2 d l2 l3 l4 l5 d1 g System
23700.0042 12,5 156 20 35,0 M 12 30 20 106 12 18 600 V70/L12
23700.0046 17,0 196 30 45,5 M 16 35 22 136 16 24 1400 V70/L16

Material:
l Steel, blackened. Pull-rod: special steel. Wearing parts heat-treated.
Ref. No. axbxc d i l g System
23700.0121 25·25·65 16 12,5 40 240 V70/L12
23700.0122 50·25·65 16 12,5 40 550 V70/L12
23700.0123 100·25·65 16 12,5 40 1180 V70/L12
23700.0161 30·30·78 22 14,0 50 450 L16
23700.0162 60·30·78 22 14,0 50 1000 L16
23700.0163 120·30·78 22 14,0 50 2100 L16
23700.0164 240·30·78 22 14,0 50 4100 L16
Material:
l Steel, blackened. Pull-rod: special steel. Wearing parts heat-treated.
Ref. No. axbxc b1 f g i k l g System
23700.0312 30·25·65 30 12,5 M 12 12,5 20 40 320 V70/L12
23700.0316 40·30·80 40 17,0 M 16 16,0 25 50 650 L16
Standard Parts
3 EH 23700.
Intermediate
Elements
3 EH 23700.
Position Base
Elements
www.halder.com 133

Notes "
134 www.halder.com

A competent partner…
Flexibility, high precision and efficient production are the demands
of a highly dynamic and complex marked we and our customers
are facing.
Thanks to our high quality standards and our target-oriented
thinking aimed to ensure an optimal utilization of our products
and business spectrum, Halder has got the necessary profile to
meet this special challenges.
More than 70 years of experience, 200 employees and sophisticated
machinery are the basis for the competent execution of the diverse
needs and wishes of our customers.
Entirely – all out of one hand…
We support you with innovative staff members, machinery and
methods with the fulfillment of your manufacturing needs – Whether
individual constructions or serial parts, simple assembling jobs or
constructions of complex component assembling.
We offer a complete package…
Precise products can only be made with precise production
equipment. Modern machine tools from reputable manufacturers
and our highly qualified skilled workers guarantee the execution of
the high quality requirements. Since December 2007 we are also
a certified supplier for Aviation Products. Furthermore, we are able
to offer you our support and know-how for commission processing.
We are certified according to
DIN EN ISO 9001
+
··· EN 9100 ···
for development and production!
www.halder.com
135

136
Planning,
Construction
+ Development…
Logistics…
Control…
Supply…
Component
assembling…
Manufacturing…
¬ Milling
¬ Surface grinding
¬ Turning
¬ Jet cutting
¬ Laser cutting
¬ Flattening
Surface
design…
Just tell us your requirements… …we will then take care about the rest!
www.halder.com
Halder Business Spectrum…
Tel. +49 (0)7392 7009-0

...quality and service directly from the manufacturer
In 1938 the company was founded by engineer Erwin
Halder in order to produce the Simplex soft-face mallet.
What once started in a small mechanical workshop
has developed to a worldwide operating company
having approx. 200 employees at five different sites.
After more than 70 years experience Erwin Halder KG
as a manufacturer of high precision products has the
necessary performance and the profile of an ideal
partner for industry and trade:
• professional competence,
• flexible adaptation to market requirements,
• individual customer consultation,
• development,
• excellent customer service,
• open-mindedness and internationalism,
customers in more than 40 countries all
over the world,
• manufacture of special and serial parts,
according to our own or to customer design,
• sophisticated machinery,
• fully developed environmental consciousness,
• high level of investments.
Request for our services - we are prepared
to meet the challenge.
The Halder terms of delivery and payment as well as the current price list are valid for all parts and products
contained in this catalogue. All dimensions are given in millimeters. We reserve the right to make alterations
as a result of further development or as a result of printing errors. In order to assure a clear identification of
the parts, please use the order numbers specified.
Copyright Erwin Halder KG. Reproduction of this catalogue in whole or part is not allowed without our express
permission.
AT
AU
BE
BA
BG
BR
CA
CH
CN
CZ
DK
ES
FI
AUSTRIA
AUSTRALIA
BELGIUM
BOSNIA-HERZEGOVINA
BULGARIA
BRAZIL
CANADA
SWITZERLAND
CHINA
CZECH REPUBLIC
DENMARK
SPAIN
FINLAND
Our Partners Worldwide
Please refer to www.halder.com
for contact details
of our agents ( • ) and subsidiaries ( )
FR
GB
HU
HR
IL
IN
IT
JP
KR
ME
MK
MX
NL
FRANCE
GREAT BRITAIN
HUNGARY
CROATIA
ISRAEL
INDIA
ITALY
JAPAN
SOUTH KOREA
MONTENEGRO
MACEDONIA
MEXICO
NETHERLANDS
NO
PL
PT
RO
RS
SE
SG
SI
SK
TH
TR
TW
US
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SWEDEN
SINGAPORE
SLOVENIA
SLOVAK REPUBLIC
THAILAND
TURKEY
TAIWAN
UNITED STATES