Auxiliaries Folder

Tetenal
Lab auxiliaries
www.tetenal.com
shop.tetenal.de

Tetenal lab auxiliaries – making your
daily work a lot easier.
SPRAYS
CAMERA VARNISH SPRAY
Deep matte micro-pigmented special purpose varnish for matting and retouching of cameras, lens
tubes, projectors, optical devices, etc. Another application is the coating of measuring devices,
scales, experimental set ups, etc that require totally non-reflective surfaces. 200 ml can. Art. No.
105202
ANTISTATIC SPRAY
Surface active spray to eliminate and prevent static charge on metal, glass and plastic, e.g. films,
negative carriers. No adverse effect on films.
400 ml can. Art. No. 105194
Camera Varnish Spray
Art. No. 105202
Protectan Spray
Art. No. 105193
PROTECTAN SPRAY
Protective gas. Avoids the premature oxidation of photographic baths. Prolongs the service life of
concentrates and working solutions.
Easy to use: spray Protectan into partially filled bottles / canisters - the neutral, heavy gas does not
react with chemicals, displaces the air – thus provides protection. Capacity: approx. 93 litres of gas.
400 ml can. Art. No. 105193
LIGHT PROTECTING VARNISH SPRAY, GLOSSY
Special varnish for the protection of print surfaces and images dyes. Absorbs the ultraviolet part of light
that causes dye fading. The colourless varnish dries rapidly and protects the treated surface against
physical damage. Glossy varnish is also suitable to reduce/eliminate scratches on films.
Yield: approx. 1.6 m².
400 ml can. Art. No. 105190
Antistatic Spray
Art. No. 105194
Light Protective Varnish Spray
Art. No. 105190
SPRAY ADHESIVE SUPER
Exclusively developed for the imaging sector and ideal for the fast and flexible laminating of photos,
posters and drawings on cardboard, wood, metal and many other materials.
The elastic, waterproof adhesive layer produces a permanent bond as soon as the photos are pressed
into place. Their position can be easily corrected beforehand; creases and bubbles can also be „wiped
away“.
400 ml can. Art. No. 102216
Spray Adhesive Super, Art. No. 102216
PROTECTIVE VARNISH
PROTENAL S
Transparent protective varnish for Canvas - for up to 13 m². Perfect finishes for high quality Ink Jet
prints. Stylish canvas prints are becoming increasingly popular as more and more consumers use
them as decorative centrepieces in their homes. To ensure that high quality canvas prints can be
enjoyed for longer, the material should be protected from mechanical damage, weathering, UV light
and moisture.
Protenal, the transparent protective varnish from Tetenal, does exactly this. The special varnish is
odourless, contains no solvents and can be diluted with water. This has the advantage that you can
work safely and easily without the need for any special ventilation.
Protenal S Satin 1 l. Art. No. 105208
Protenal S
Art. No. 105208

CLOTHS
ANTISTATIC CLOTH PREMIUM
Impregnated high quality special cloth for eliminating and preventing static charge on surfaces
such as plastic, glass, rubber, perspex, etc.
Provides an invisible antistatic coating – simple wiping is sufficient to divert the static charge,
the treated surface will become dust and dirt repelling.
Top rank quality to meet highest professional requirements. Lint free cloth, seam edges. Multiple
use, ideal for photographic films, LCD/TFT screens, vinyl records, CD/DVD, foils, dashboards,
etc. Repeat application when required. Do not wash. It is recommended to keep the
Antistatic Cloth Premium in the original packaging. Regeneration of the cloth possible with
Tetenal Antistatic Spray (Art. No. 105194). Orange. Size: 29 × 30 cm. Art. No. 101317
Antistatic Cloth Premium, Art. No. 101317
CLEANING CLOTH
Special purpose lint free, non impregnated cloth. Recommended for use with Tetenal Graphic
Arts Cleaner, Film Cleaner Spray and Melt Remover - for removing water stains, finger prints
and grease marks. Ideal cloth for work with Melt Remover.
Yellow. Size: 30 × 35 cm. Art. No. 101313
HIGH TECH OPTIC CLOTH
Special purpose high-tech microfibre fabric for gentle cleaning of optical lens and glasses.
Washable up to 60°C, keeps its high quality standard even after washing.
White. Size: 20 × 25 cm. Art. No. 101315
High Tech Optic Cloth, Art. No. 101315
CLEANER
MELT REMOVER
Highly active special cleaner based on natural properties (orange terpene) to remove instant/
contact adhesive, hotmelt residues, grease, tar etc.
Easy and safe application: Apply it to a cloth and treat the affected area. Allow to soak for a
few minutes. Carefully remove with the cloth.
Safety instruction: Do not apply on hot surfaces, do not pour into a flame.
No public product - sale to commercial clients only.
500 ml bottle, with flip-top cap. Art. No. 102185
Melt Remover, Art. No. 102185
FILM CLEANER SPRAY
Film cleaner spray to remove fingerprints, dust or grease spots on all types of films and display
materials. Easy to use. Spray film cleaner directly onto the film and wipe over with a cleaning
cloth (see Art. no. 101313).
400 ml can. Art. No. 105198
GRAPHIC ARTS CLEANER
Highly active cleaner, especially for films, mounting films, glass and scanner drums. Removes
residuals of grease and adhesives. Antistatic properties. Ideal for the photobook finishing -
recommended for use with Tetenal Cleaning Cloth Art. No. 101313 . No public product - sale to
commercial clients only.
1 l. Art. Nr. 105196
Film Cleaner Spray
Art. No. 105198
Graphic Arts Cleaner
Art. No. 105196
CHEM CLEANER
Efficient cleaner for stainless steel, plastic and glass. Removes tar, developer stain and other deposits.
Supplied in a bottle with integral spray valve. Ideal for the „intermediate“ cleaning of colour
developer racks.
Very easy application: Spray on the surfaces to be cleaned, leave to take effect for a minute or
two, rinse off with water. Dilution: 1+4 (approx. 30-45 min.) - 1+9 (max. 12 hours).
1 l: bottle with integral spray valve. Art. No. 103400
5 l: As a refill pack for the 1 l bottle or diluted as a developer tank cleaner. Art. No. 103401
Chem Cleaner, Art. No. 103400 / 103401

ANTI ALGAE AGENTS
ALGENEX PLUS *
Biocide for B&W washtanks.
Prevents microbiological slime and formation of algae. Keeps tanks clean.
Dosage 1,5 - 3 ml per litre water. Not suitable for colour processes. Add at the end of the day.
1 litre Art. No. 104571
5 litres Art. No. 104575
ALGENEX COLOUR *
Broad-spectrum biocide. Prevents microbiological growth in wash tanks of colour processes.
Also to be used as an additive for Super Stabilizers in colour processes.
Dosage: 1,5 - 3ml per litre water or Super Stabilizer. Add to the water at the end of the day - add
to the Super Stabilizer always when mixing replenisher and initially to the working solution.
1 litre Art. No. 104578
5 litres Art. No. 104582
Algenex Plus, Art. No. 104571 / 104575
ALGENEX TABLETS *
Algenex Tablets are designed for photographic final wash tanks in B&W and colour processes.
It efficiently prevents microbiological growth and even reduces existing bio slime.
Active chlorine is gradually released thanks to the depot effect. Replace every 2-3 weeks.
Not suitable for Super Stabilizer / Stabilizer and intermediate wash tanks of colour processes.
10 tablets of 20 g. Art. No. 106085
Algenex Tablets Super Rinse TSC-Tablets
Art. No. 106085 Art. No. 103152
SUPER RINSE TSC TABLETS
Super rinse in tablet form for minilabs such as Frontier.
For 100 x 5 litres. Art. No. 103152
PROCESSOR CLEANER MONOCHROME
Processor Cleaner Monochrome is a special cleaner for developer- and watertanks in X-ray, B&W
and PrePress. 2-part powder formula.
Not suitable for Colour Developer tanks and B&W machines which are running with hydroquinone-free
developers, e.g. Eukobrom AC. Easily removes even stubborn dirt, such as silver, silver
sulphide and lime.
For 4 x 10 litres. Art. No. 104010
Processor Cleaner Monochrome,
Art. No. 104010
ORGANISATION AIDS
SPLICING TAPE
High-quality, silicon adhesive tape for leader cards that sticks perfectly to film strips and leader
cards and can be removed to leave no residues.
The tape withstands all chemicals, is very tenacious and guarantees easy unrolling thanks to the
special coating on its rear.
19 mm x 66 m. Art. No. 103239
Splicing Tape, Art. No. 103239
SLEEVING MATERIAL FOR 35 mm FILMS
Sleeving foils for sleeving machines, 4-frame, matte.
Not perforated, with sensor markers, antistatic.
2 rolls per box. Art. No. 103323
Sleeving Material for films
Art. No. 103323
* Use biocides safely. Always read the label and product information before use.

TWIN CHECK LABELS
Self-adhesive Tetenal Twin Check Labels of polyester stick firmly to the film strips and are
resistant to all photographic chemicals.
The labels come as 1 roll of 2000 numbers (7 x 20 mm). Art. No. 103319
EXTRACTOR TAPE
High-quality, black extractor tape for the quick and easy removal of films from 35 mm
cartridges using film extractors and film pullers.
Size: 16 mm x 10 m. Art. No. 103246
Twin Check Labels, Art. No. 103319
FRSS-10 CARTRIDGE (WATER FILTER)
Water filter for Fuji FRSS Systems, used for the demineralization of tap water.
High capacity. Art. No. 103057
FIXING BATH TESTER
For the quick and easy measurement of the silver content and pH value in B&W fixing baths.
Use: dip the test strip into the fixing bath, shake off excess liquid and compare the
coloured measurement field with the scale on the packaging.
Limited use in colour fix and bleach fix baths.
An original Macherey & Nagel product.
Pack with 100 test strips. Art. No. 101243
Extractor Tape, Art. No. 103246
FRSS Water filter for Fuji minilabs Art. No. 103057
CHEMICAL FILTERS FOR MINILABS
High quality sintered filters for most common minilabs. Available in multipacks with 6
or 12 filters, wrapped in foil.
Assortment overview on request.
INK RIBBONS FOR MINILABS
Special ink ribbons for back printing. These are available for most minilab types.
Assortment overview on request.
Fixing bath tester, Art. No. 101243
PRINTER AND SCANNER LAMPS FOR MINILABS
High-quality halogen printer lamps with a very constant colour temperature and long
service life.
Printer lamps should be changed on a regular basis to avoid a weakening in the light intensity
and associated colour disparities.
Chemcal filters for minilabs
GLOVES
Essential for prevention of fingerprints on e.g. negatives. These gloves are composed of
100% cotton. They minimise static charge and allow cleanly workings.
Colour: white. Sizes: S, M, L
10 pair per item. Art. No. 101480 - 101482
BLUELINE PHOTO PACKAGING
Blueline photo packaging – a perfect match of top rank quality and attractive design.
Wide range of order envelopes, print envelopes, Eurocombi envelopes, poster tubes and
poster bags.
Product overview available on request.
Inking ribbons for minilabs
Gloves, Art. No. 101480-101482
Blueline Photopackaging

Tetenal Europe GmbH
Schützenwall 31-35 · 22844 Norderstedt / Germany
T 0049 (0)40 521 45 0 · F 0049 (0)40 521 45 296
E germany@tetenal.com · W www.tetenal.com
TETENAL Imaging Service GmbH
Schützenwall 31-35 · 22844 Norderstedt / Germany
T 0049 (0)40 521 45 0 · F 0049 (0)40 521 45 296 · E service@tetenal.com · W www.tetenal.com
TETENAL LTD
2 Meridian West · Meridian Business Park
Leicester LE19 1WX / Great Britain
T 0044(0) 116 289 36 44 · E uk@tetenal.com · W www.tetenaluk.com
TETENAL S.A.R.L.
Parc d’activités, Terres du Canada · 89470 Monéteau / France
T 0033(0) 3 86 40 91 91 · F 0033(0) 3 86 40 59 96 · E france@tetenal.fr · W www.online.tetenal.fr
TETENAL Polska Sp. z o.o.
Al. Roździeńskiego 188 b · 40-203 Katowice / Poland
T 0048(0) 32 35 59 110 · F 0048(0) 32 35 59 123 · E polska@tetenal.com · W www.tetenal.pl
351721/01 · 29-11-2018
Image and photo expertise since 1847.
blog.tetenal.de