ES721 ISO40 7 kW NL - HSD
ES721 ISO40 7 kW NL - HSD
ES721 ISO40 7 kW NL - HSD
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>HSD</strong><br />
§ 12 REPLACEMENT OF COMPONENTS<br />
Inside the electrospindle, there is a pre-loaded spring with a force of hundreds of<br />
kilograms. This spring is attached to a tie-rod that may be thrown out violently if<br />
the electrospindle is dismantled by personnel who have not been sufficiently<br />
trained.<br />
Carry out only the operations described in this manual, paying close attention to<br />
the instructions given; for further information, contact <strong>HSD</strong> S.p.A. Customer<br />
Service.<br />
Observe the safety precautions for maintenance given on page Errore. Il segnalibro<br />
non è definito..<br />
Only the adjustment and replacement operations with original <strong>HSD</strong> S.p.A. spare<br />
parts described in this section of the manual are permitted.<br />
Any other type of operation is not permitted and will invalidate the product<br />
warranty.<br />
5801H0066 en Rev.01 37/48