ES721 ISO40 7 kW NL - HSD

HSD
6.5 STORAGE
If the product is to be stored, it must be protected against the weather, moisture, dust and
aggressive atmospheric and environmental agents.
It is therefore necessary:
� To carry out periodic checks to ensure the good condition of the general protection;
� To manually rotate the shaft (roughly once a month) to maintain optimum lubrication of the
bearings.
STORAGE TEMPERATURE: from -5° C (+23° F) to +55° C (+131° F)
RELATIVE HUMIDITY (NON-CONDENSING): from 5% to 55%
The storage time limit of HSD electrospindles is 12 months.
After this time-limit the product must be inspected by an authorized HSD service.
i Please contact HSD Customer care service if you need more information
(see chapter § 3).
5801H0066 en Rev.01 10/48