OS-9 for the Prospector P1100 Board Guide

MAUI Driver Descriptions
GX_SA1100 LCD Graphic Driver Specification
This section describes the hardware specification of the StrongARM
SA11X0 LCD driver (named gx_sa1100) and descriptor (named gfx).
The hardware sub-type defines the board configuration. This specification
should be used with the MAUI Graphics Device API.
Board Ports
This driver is used in the following ports.
The Prospector board uses a Sharp LQ0804V2DS01 with a 480x640, 8 or
16 bpp LCD panel.
The GraphicsClient board typically uses a Sharp LQ64D341 18 bpp color
(16 used), TFT, with a resolution of 640x480 single panel. This panel is
connected to the GraphicsClient with one of several possible cables:
8 bpp - most common to date
RGB 565 - next most common
RGB 655
RGB 556
Note
ADS has shipped several other LCD panels, usually simply modifiying
the device descriptor, using timing values from ADS, is sufficient to
supoport these other panels.
The SideArm board can support an LCD panel, but does not typically ship
with one. For this reason the SideArm port does not build this driver. If the
user did connect a LCD panel to this board, simply copy the makefiles from
one of the other ports into the SideArm port.
OS-9 for the Prospector P1100 Board Guide 67
B