OS-9 for the Prospector P1100 Board Guide

More documents

Recommendations

Info

Default Data Bits:8 Default Handshake:Software term3/t3 Descriptor modules for use with sc11X0 and SP3. Board header:J2 Default Baud Rate:115200 Default Parity:None Default Data Bits:8 Default Handshake:Software scllio SCF driver that provides serial support via the polled low-level serial driver. Descriptors for use with scllio vcons/term Descriptor modules for use with scllio in conjunction with a low-level serial driver. Port configuration and set up follows that which is configured in cnfgdata for the console port. It is possible for scllio to communicate with a true low-level serial device driver like io1100, or with an emulated serial interface provided by iovcons. scur8hc007 SCF driver that provides serial support. Descriptors for use with scur8hc007 k0 kx0 m0 62 OS-9 for the Prospector P1100 Board Guide
Board-Specific Modules Network Configuration Modules inetdb inetdb2 rpcdb sps10 sps11 ucb1200 Support Modules These files are located in the following directory: MWOS/OS9000/ARMV4/PORTS/PROSPECTOR/CMDS/BOOTOBJS/SPF spucb1200 SPF driver that supports the on-board Phillips ucb1200 chip. This device communicates to the SA11X0 over SP4 using MCP. The spucb1200 will work with UCB1100, ucb1200, and ucb1300 devices. Descriptors for Use with spucb1200 ucb SPF descriptor module that provides access to ucb1200. Maui Graphical Support modules These files are located in the following directory: MWOS/OS9000/ARMV4/PORTS/PROSPECTOR/CMDS/BOOTOBJS/MAUI gx_sa1100 MFM MAUI driver module with support for the board’s LCD panel. OS-9 for the Prospector P1100 Board Guide 63 A
Page 1 and 2:
www.radisys.com Revision A • July
Page 3 and 4:
Table of Contents Chapter 1: Instal
Page 5 and 6:
62 Descriptors for use with scllio
Page 7 and 8:
Chapter 1: Installing and Configuri
Page 9 and 10:
Installing and Configuring OS-9® R
Page 11 and 12: Installing and Configuring OS-9® T
Page 13 and 14: Installing and Configuring OS-9® C
Page 15 and 16: Installing and Configuring OS-9® A
Page 17 and 18: Installing and Configuring OS-9® S
Page 19 and 20: Installing and Configuring OS-9® C
Page 23 and 24: Installing and Configuring OS-9® I
Page 27 and 28: Installing and Configuring OS-9® A
Page 29 and 30: Chapter 2: Board-Specific Reference
Page 31 and 32: Board-Specific Reference Booting ov
Page 33 and 34: Board-Specific Reference The Fastbo
Page 35 and 36: Board-Specific Reference B_OKROM Th
Page 37 and 38: Board-Specific Reference This redef
Page 39 and 40: Board-Specific Reference Table 2-1
Page 45 and 46: Board-Specific Reference GPIO Usage
Page 49 and 50: Board-Specific Reference Syntax pfl
Page 51 and 52: Board-Specific Reference Syntax ucb
Page 53 and 54: Appendix A: Board-Specific Modules
Page 55 and 56: Board-Specific Modules Table A-1 Bo
Page 57 and 58: Board-Specific Modules Table A-2 Ge
Page 59 and 60: Board-Specific Modules System Confi
Page 61: Board-Specific Modules RAM Disk Sup
Page 65 and 66: Appendix B: MAUI Driver Description
Page 67 and 68: MAUI Driver Descriptions GX_SA1100
Page 69 and 70: MAUI Driver Descriptions Table B-1
Page 71 and 72: MAUI Driver Descriptions This drive
Page 73 and 74: MAUI Driver Descriptions Build the
Page 79 and 80: MAUI Driver Descriptions Encoding a
Page 81 and 82: MAUI Driver Descriptions UCB Audio
Page 83 and 84: MAUI Driver Descriptions Telecom Th
Page 85 and 86: MAUI Driver Descriptions Raw Mode A
Page 87 and 88: MAUI Driver Descriptions 3. touch_c
show all

OS-9 for the Prospector P1100 Board Guide

Create successful ePaper yourself

Delete template?

Save as template?