OS-9 for the Prospector P1100 Board Guide
OS-9 for the Prospector P1100 Board Guide
OS-9 for the Prospector P1100 Board Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Default Data Bits:8<br />
Default Handshake:Software<br />
term3/t3 Descriptor modules <strong>for</strong> use<br />
with sc11X0 and SP3.<br />
<strong>Board</strong> header:J2<br />
Default Baud Rate:115200<br />
Default Parity:None<br />
Default Data Bits:8<br />
Default Handshake:Software<br />
scllio SCF driver that provides serial support via<br />
<strong>the</strong> polled low-level serial driver.<br />
Descriptors <strong>for</strong> use with scllio<br />
vcons/term Descriptor modules <strong>for</strong> use with scllio in<br />
conjunction with a low-level serial driver. Port<br />
configuration and set up follows that which is<br />
configured in cnfgdata <strong>for</strong> <strong>the</strong> console port. It is<br />
possible <strong>for</strong> scllio to communicate with a true<br />
low-level serial device driver like io1100, or with an<br />
emulated serial interface provided by iovcons.<br />
scur8hc007 SCF driver that provides serial support.<br />
Descriptors <strong>for</strong> use with scur8hc007<br />
k0<br />
kx0<br />
m0<br />
62 <strong>OS</strong>-9 <strong>for</strong> <strong>the</strong> <strong>Prospector</strong> <strong>P1100</strong> <strong>Board</strong> <strong>Guide</strong>
Change language