grotanol® 3025 - Schülke & Mayr

More documents

Recommendations

Info

grotanol ® 3025 - Application areas Cleaning and working tools Sanitise with 0.5% grotanol ® 3025 solution. The dipping of cleaning and working tools into a 0.5 % aqueous solution of grotanol ® 3025 is the best way to prevent microbial growth. 04.05.2011 | Production Hygiene | Schülke & Mayr GmbH | Page 12
grotanol ® 3025 – check of compatibility Rinsing with water usually is not necessary, because grotanol ® 3025 only contain actives which are accepted as cosmetic preservatives. Nevertheless, we suggest to perform compatibility tests. E.g. proteins can cause discolorations in the presence of only small amounts of grotanol ® 3025. In these cases it is necessary to rinse, but this only should be done directly before using the equipment. Recommended test procedure Add 1 % of the disinfectant solution (e.g. a 0.5 % aqueous grotanol ® 3025 solution) to the cosmetic product. Evaluate visible changes after 1 week. 04.05.2011 | Production Hygiene | Schülke & Mayr GmbH | Page 13
Page 1 and 2: Production Hygiene Disinfection of
Page 3 and 4: Introduction Use of microbiological
Page 5 and 6: Small amounts of contaminated resid
Page 7 and 8: Which products are recommended for
Page 9 and 10: grotanol ® 3025 - Application area
Page 11: grotanol® 3025 - Application areas
Page 15 and 16: Maximum contact time Is it possible
Page 17: Thank you very much for your attent

grotanol® 3025 - Schülke & Mayr

Create successful ePaper yourself

Delete template?

Save as template?