Hydraulic Power for all Industrial Applications

Enerpac Hydraulic Cylinders Hydraulic Technology Worldwide
ENERPAC hydraulic cylinders are available in
hundreds of different configurations. Whatever the
industrial application... lifting, pushing, pulling, bending,
holding... whatever the force capacity, stroke length, or
size restrictions... single- or double-acting, solid or hollow
plunger, you can be sure that Enerpac has the cylinder to
suit your high force application.
Enerpac cylinders fully comply to ASME B30.1.
A
F
B
K
J
Z1
Z
Golden Ring Design
The exclusive Golden
Ring Design is a unique bearing design
which absorbs eccentric load stresses to
protect your cylinder against abrasion,
over-extending or plunger blow-outs and
jamming or top-end mushrooming.
As a result, Golden Ring cylinders
provide long, trouble-free operation.
6
3/8"-
18NPTF
A
E
N
P
B
H
X
W
Hardened Saddle
prevents plunger from
mushrooming and jamming
in the top bearing. Snap-in
design.
Plunger Wiper
reduces contamination,
extending cylinder life.
Golden Ring
absorbs eccentric loading
without galling cylinder parts.
Plated Plunger
resists wear and rust.
F
K
Golden Ring
absorbs eccentric loading
without galling cylinder parts.
F1
Q
Plunger Return Spring
enables fast plunger
retraction on single-acting
cylinders.
Cylinder-Pump Sets
For your ordering convenience
cylinders are available in sets
(cylinder, gauge, couplers,
hose and pump).
Page:
64
Note: The cut-away drawing is representative of typical cylinder construction, and may not represent all cylinders in this section.