Hydraulic Power for all Industrial Applications

▼ Pre-cast segmental bridge building
To support the 80 tons main cast section of a
segmental bridge, Enerpac CLL-506 (50 tons)
jacks offer beside the required lifting force the
positive locking feature called ‘mechanical
lock-nut’. On each pier of this elevated light
train system 4 CLL-506 jacks support and
align the cast sections. Once the hanging cast
sections are aligned with the main cast
sections, the jacks are mechanically locked to
allow permanent fixation of this fly-over. Jobs
like these are made significantly easier and
faster using high pressure hydraulic jacks,
instead of temporary supports or mechanical
screw jacks.
Products:
• CLL-Series, lock-nut jacks
▼ Lowering bridge sections
For the lifting and final positioning of bridge
sections in the Alps, Enerpac CLS-1006
(100 tons, 6 inch/150 mm stroke) jacks were
used. The jacks were powered by several
ZE4320MW electric pumps.
Products:
• CLS-Series, single-acting high tonnage jacks
• ZE-Series, electric pumps
220
Enerpac in action
▼ World-beating heavyweight lifting with pinpoint precision
An Enerpac synchronous hydraulic lifting
system has been employed in Queensland
(Australia) to lift, within tolerances of 0,5 mm,
a huge mining dragline weighing more than
3500 tons.
The PLC-controlled precision hydraulic
system with eighty 100-ton hydraulic
cylinders was used to lift the dragline for
essential maintenance of the bearing surfaces
on which the dragline swivels. It also
delicately tilted the huge suspended weight to
simulate different loads on the structure so
bearing surfaces could be precisely machined
to accommodate them and maximise the
bearing surfaces’ lifespan.
Synchronous safety on huge walking dragline
reveals efficiency and control benefits for
many industries.
Products:
• RR-Series, double-acting jacks
• SLS-Series, Synchronous lifting systems
• Electric split-flow pumps
• PLC-Control units
Hydraulic Technology Worldwide