Change HP Printer Region

Change Your Region of HP Printer
with an Ease
Are you planning to move somewhere out of the USA and want to take
your HP printer with you? Then there is a huge chance that your printing
device will not work properly out there and if in any case, it will work then
at least your ink cartridges might not. The main reason of this error is that
your HP Printer locks the region of your printing device. Another thing,
you might face in such a situation is, suppose you buy new cartridges for
your printer, then you will probably get an incompatibility error. But, fret
not! Take help from HP printer service providers. They will resolve the
issue within a few minutes.
What exactly this issue means?
If you are dealing with the same issue then this is the perfect place for
you to sort out your current problem with HP Printer. In this blog, we will
discuss what will happen to your printer when you change its region. So,
let’s begin it why this situation occurs.
Suppose, you bought your HP Printer from South Africa and you are
transferring your from there to the USA, so it is obvious you will take your
belongings with you. In that case, there is a chance that your HP Pinter
will not work properly in another region ( like the USA) because the HP
printer cartridges are specially designed for its originate region like South
Africa which unable to perform in the USA. The first time you start your
printing device in any other region, it will flash the message that the print
cartridge will only use in the specific country or region. So, if you try to set
its location manually i.e. South Africa then you will get some errors:
Cartridge not intended for this printer.
Compatibility issue with a cartridge.
Incorrect cartridges.

Worry not! This can be fixed by following these below-mentioned Hewlett
Packard printers troubleshooting steps:
Step1: Dial our HP printer support number.
Before calling them first,
make sure that you have a completely new set of ink toner and cartridges
and your printing device is switched on and perfectly connected with your
PC.
Step2: Ask them for guidance to re-regionalize your HP printer. Then they
will ask you that there is a set of numbers at the top of a test page.
Step3: Print the text page and tell them that set of numbers. Then, the
expert will tell you where to go in your printer’ setting and enter a special
code that he/she give to you.
Step4: The technical person will tell you that switch off your printer and
restart that after 2 minutes. Once it will restart, check whether your
printer’s region is set.
Step5: Remember, once you have set your printer’s region you cannot use
the printer cartridge for that specific region. You can reset your printer’s
region only 3 times after that its region will be locked. So, do not make
false attempts.
Follow these crucial steps to reset your Printer’s region by taking expert
help.
www.hpprintertechnicalsupport.us 1-800-296-1402