Easy Steps To Feed Papers In HP Printer

How To Feed
Papers In Hp
Printer?

Have you purchased a new HP Printer and
wants to start printing? Loading papers in
the printing machine is not at all a difficult
task. In this blog, you will learn how easy it is
to feed the pages and start printing.

‣ Firstly, open the front door of the HP Printer
where papers are loaded for printing. Pop it
to fold it down and open the door.
‣ Now, you have to pull the arm of the machine
that is tucked inside the paper tray out.
Reverse the small flap at the end of the arm.
It will prevent the printer machine to fall the
paper on the floor.

‣ Take a bundle of pages that is ½ to 1 inch in
height and lightly push one of the short edges
of the bundle on a flat surface. Continue doing
it until the opp. Edge of the short pages of the
stack appears to be lined up. Next, tape on
other side i.e. long side until each and every
sheet is lined up.

‣ Place the limited number of sheets on the
paper tray in a correct manner. The short side
should be towards the entrance of the tray and
also adjust the paper guidelines.
‣ Push the tray little inside to fit in the machine.
Also, confirm if any paper if folded or tattered.
If it is, then remove that page from the
machine.

‣ Turn on the Hp Printer and start printing
the documents.
‣ Please note that if you are printing a
photograph or an envelope then you
have to adjust the guidelines of the tray
accordingly.

If you are experiencing a problem related to a
printer driver, image quality, only black and white
printouts, blur or lousy prints, various error
messages showing on display, then contact us on
our toll-free HP Printer Tech Support Canada Toll-
Free Number 1-855-687-3777. We promise to help
you with an ideal solution that is hassle-free. Email
us your query to avail our help through email
support.
Source