You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Table 1 - Minimum wall thickness of tubes<br />
Dimensions in millimeters (inches)<br />
Material Type<br />
CS, low alloy steel (9% Cr max) Al and Al alloy<br />
Cu and Cu alloys<br />
High alloy (austenitic, ferritic Stainless and<br />
Duplex )and other non-ferrous materials<br />
Titanium<br />
Minimum Wall Thickness a<br />
2.11 mm<br />
1.65 mm<br />
1.473 mm<br />
1.067 mm<br />
a<br />
For low-fin tubing, this shall be minimum thickness at the root diameter<br />
Charlie Chong/ Fion Zhang
Change language