You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DOMITE<br />
& WEAR<br />
BLOCKS<br />
DOMITE & WEAR BLOCKS<br />
Domite 700HB Wear Products<br />
Domite is a combination of high chromium white iron metallurgially<br />
bonded to a mild steel backing plate. The white iron has a minimum<br />
hardness of 700 Brinell (63Rc) providing maximum abrasion<br />
resistance protection for your equipment.<br />
Domite is available in a wide range of shapes and sizes and can be<br />
used in combination to protect any impact and high abrasion areas.<br />
CHOCKY BLOCKS<br />
For almost any<br />
application where<br />
abrasive wear is causing<br />
lost production through<br />
machine down time<br />
WEAR PLATES<br />
Easy to install, with<br />
the ability to change<br />
out worn sections only<br />
rather than replacing<br />
whole sheets or plates.<br />
WEAR BARS<br />
Easy to install, with<br />
the ability to change<br />
out worn sections only<br />
rather than replacing<br />
whole sheets or plates.<br />
KNIVES<br />
Offers sharp edges at the<br />
start of use and retain<br />
their edge sharpness<br />
and cutting efficiency<br />
longer than hard facing.<br />
SKID BARS<br />
Designed to protect<br />
and extend the life of<br />
mining and quarrying<br />
heavy duty buckets.<br />
WEAR BUTTONS & DONUTS<br />
Perfect alternative to<br />
expensive, labour intensive<br />
hard facing. Light weight<br />
and easy to handle, ideal<br />
for in situ repairs<br />
WAFER STRIPS<br />
Thin and lighter than<br />
chocky bars with<br />
superior wear and<br />
impact resistance<br />
than chrome clad<br />
plate and hard facing<br />
76<br />
0800 732 578 | REALSTEEL.CO.NZ
Change language