You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Programming 2-way remote<br />
Disable remote receiving<br />
You may turn off the 2-Way remote receiving signal from the main unit. Press button<br />
simultaneously for 2sec. until one long beep is heard. Remote receiving is now<br />
disabled. To turn on receiving again, Press button simultaneously until two long<br />
beep is heard, remote receiving is now enable.<br />
2-way LCD display :<br />
2way remote button ON/OFF<br />
For safety purpose, this 2-way remote can be lockout the remote button in order not to<br />
mis-touched the buttons. Press button for over 2sec. until one beep is heard, remote<br />
button is now locked. To turn on remote button, press button for over 2sec. until two<br />
beeps is heard, remote button is now unlocked.<br />
2-way LCD display :<br />
Vibrate mode on/off<br />
Press button for over 2sec. the 2-way remote will respond tone & vibrate feature,<br />
the button pressing 2sec. will change the feature, see under table:<br />
Beeps Vibrations 2-way remote feature<br />
1-beep 1-time Remote with tone and vibration<br />
1-beep<br />
If set with vibration only<br />
the 2-way LCD will display :<br />
1-time<br />
Remote with vibration only<br />
Remote with tone only<br />
-9-