watersports-catalogue-boatworld-2018

Wakeboard Towers & Tower Accessories
XCITE WAKEBOARD TOWER
SPEAKER CANS
XC100. Xcite Wakeboard Tower Speaker Cans
look great on your Xcite Wakeboard Tower!
Simple to fit, just bolt. Fully adjustable. Xcite
Wakeboard Tower Speaker Cans are in a bright
polish finish to match your Xcite Wakeboard
Tower. Sold as a pair. Priced as a pair! NB:
Does not include speakers. Speak to us for
advice on this.
£99 per pair
XCITE BIMINI TOP
XC104. The Xcite Bimini top fits all of the Xcite towers.
Bling up your tower and get some shade from the sun
(or the rain !)
£169
XCITE BIMINI TOP
XC104-1. Under tower bimini, the ultimate in sun shade for all 2” towers.
Includes tensioning straps.
£229
PRICE
BUSTER!
XCITE WAKESURFER /
WAKEBOARD RACK
XC343. Ideal rack for the wakesurfer and
wakeboarder. This rack will take one wakesurfer
and up to two wakeboards. Easy to install on any
2” diameter wakeboard tower. Billet aluminium
construction. Fully adjustable. Fully polished
assembly. Rubber inserts to protect your high end
wakeboards. Carry your boards in style with this
Xcite Rack. (Note the centre pair of fingers have a
clear gap of 55mm for the wakesurfer)
WAS £179 NOW £165
XCITE ADJUSTABLE JETSKI/
BOAT SKI PYLON
XC193/1. Polished 2 inch diameter stainless steel pole
and support arms. Comes complete with all fixings.
Pylon adjusts telescopically in height between 21
1/4” to 25 1/4” (54cm to 64cm). Fully adjustable bottom
fixing bracket on main pole to take up any fixing
angle between horizontal and 80 Degrees. Telescopic
1 inch diameter support arms adjust between 15 3/4”
to 24” (40cm to 61cm). Integrated handle for rear facing
observer with knurled grip. Polished smooth rope
head for less wear and tear. Stainless steel clip pins
attach support arms to pole for quick and easy assembly.
These clips and a single Allen Bolt to release
main pole from bottom bracket, means the whole
assembly can be detached/attached in a couple of
minutes !! Space above support arm bracket for fixing
Xcite Wakeboard Rack (not included). Rack fitting not
recommended for kneeboarding or towing towables
without mods. Contact us for details!!
£179.95
PRICE
BUSTER!
XCITE KNEEBOARD /
WAKEBOARD RACK
XC344. Ideal rack for the kneeboarder and
wakeboarder. This rack will take one kneeboard and
one wakeboard. Easy to install on any 2” diameter
wakeboard tower. Billet aluminium construction. Fully
adjustable. Fully polished assembly. Rubber inserts to
protect your high end wakeboard or kneeboard.
Carry your boards in style with this Xcite Rack.
(Note for the kneeboard pair of fingers there is a clear
gap of 115mm for the kneeboard)
WAS £179 NOW £155
#1 Best Selling
Ski Pylon!
XCITE COBRA
WAKEBOARD RACK
XC106. The Xcite Cobra Wakeboard Rack is the most
versatile of our racks, adjusting to fit any angle of
pipe. It holds two wakeboards and comes in a high
polish finish. Bungee straps for securing boards
Holds two boards. Billet aluminium construction. Fully
adjustable. Fully polished assembly. Rubber inserts to
protect your high end wakeboards.
POLISHED £114.95
ANODISED £134.95
XCITE ADJUSTABLE WATER SKI PYLON
XC193. High quality polished 2 inch diameter stainless steel pole and support arms. Comes complete with all
fixings. Pylon adjusts telescopically in height between 34" to 58" (86cm to 147cm). Telescopic
1 inch diameter support arms adjust between 33" to 57" (83.5cm to 144cm). Polished smooth rope head for less
wear and tear. Stainless steel clip pins attach support arms to pole for quick and easy assembly. Coupled with
main pylon screwed to base plate for easy mounting
and dismounting. The Xcite Adjustable Water Ski
Pylon is ideal for skiers, wakeboarders and towables.
Designed to fit in open cockpits and through rear
bench supports on most sports boats and ribs.
£199.95
XCITE JETSKI/BOAT RACK POST
XC193-2. This high quality Xcite JetSki/Boat Rack Post has
the following features: Polished 2 inch diameter stainless
steel pole (bolted onto threaded insert). Comes complete
with all fixings. 15 3/4” (40cm) tall. Fully adjustable bottom
fixing bracket on main pole to take up any fixing angle
between horizontal and 80 Degrees. Bottom bracket
on pole secured by 4 s/s screws/bolts into deck.
Designed for fixing Xcite Wakeboard Rack (not included).
The Xcite JetSki/Boat Rack Post is ideal for rear decks
of Jetskis with an Xcite Ski Pole fitted or cockpits/decks
of boats where a Wakeboard Tower is not an option.
Helps reduce clutter in/on the boat!
NOTE Xcite Wakeboard Rack not included in this price -
post only!!
£79.95
XCITE WATERSKI RACK
XC189. A Waterski rack to fit your tower at a great
price, will take 1pr of Combo skis or 2 Slalom skis.
£139.95
XCITE 2.5”
RACK ADAPTER
CLAMP
XC 188.If your wakeboard tower
is 2 1 /2” dia this clamp allows you to adapt all our
racks/mirrors/speakers to fit your tower
£19.95 each
XCITE 2.5"
SPEAKER
CAN CLAMP
XC230. The Xcite 2.5"
Speaker Can Clamp is the
perfect answer to getting your
Xcite Speakers to fit onto larger 2.5" diameter towers.
Made from the same polished aluminium as all our
Xcite Tower products to match perfectly!
£17.50 each
1 1 /2” SHIM ADAPTER
XC 1177. 1 1 /2” shim adapter to allow
this fitting to A Frames.
£9.99 each
XCITE WAKEBOARD TOWER
MIRROR
XC107. Wake up to a top notch mirror for all 2 inch and
2.5 inch dia towers. Polished Aluminium Arms Center
pivot allows you to position the mirror for the best
viewing (Note: Most single arm mirrors don't work
right on towers) Tournament Mirror 7 inch x 13 inch.
Stainless Steel Fasteners
POLISHED £79.95
ANODISED £89.95
SPARE REPLACEMENT MIRROR £23.95
sales@boatworld.co.uk 0870 043 4942 boatworld @boatworlduk 51
Please note products are not in scale to each other