BAKER HUGHES - Drilling Fluids Reference Manual

HORIZONTAL AND EXTENDED REACH DRILLING
16. Tomren, P. H., Iyoho, A. W., and Azar, J. S., Experimental Study of Cuttings Transport in
Directional Wells, SPE Drilling Engineering, February 1986, pp. 43-56.
17. Okrajni, S. S., and Azer, J. J., The Effects of Mud Rheology on Annular Hole Cleaning in
Directional Wells, SPE Drilling Engineering, August 1986, pp.297-308.
18. Jefferson, D., and Zamora, M., Hole Cleaning and Suspension in Horizontal Wells, 3 rd Annual
North American Conference on Emerging Technologies – Coiled Tubing and Horizontal Wells
– Calgary, May 15 – 16, 1995.
19. Brown, N. P., Bern, P. A., and Weaver, A., Cleaning Deviated Holes: New Experimental and
Theoretical Studies, SPE/IADC Paper 18636, Presented at the 1989 SPE/IADC Drilling
Conference, February 28 - March 3, 1989.
20. Hemphill, T. and Rojas, J.C., Drilling Fluid Sweeps: Their Evaluation, Timing and Applications,
SPE 77448.
21. Sewell, M. and Billingsley, J., An Effective Approach to Keeping the Hole Clean in High-Angle
Wells, World Oil, October 2002, pp. 35 – 39.
22. Power, D.J., Hight, C., Weisinger, D. and Rimer, C., Drilling Practices and Sweep Selection for
Efficient Hole Cleaning in Deviated Wellbores, SPE 62794.
23. Hole Problem Data Package, BP, XTP, Sunbury, April 1996.
24. Mondshine, T. C., Drilling Mud Lubricity, Oil & Gas Journal, December 7, 1970, pp. 70-77.
25. Papay, A., G., Oil-Soluble Friction Reducers Theory and Application, Journal of the American
Society of Lubrication Engineers, Vol. 39, pp. 419-426.
26. Browning, W. C., Potentials of EP Lubricants in Oil Well Drilling Muds, Presented April 24,
1957, First Gulf Coast Drilling and Production Practice Meeting.
27. Bol, G. M., Effects of Mud Composition on Wear and Friction of Casing and Tool Joints, SPE
Drilling Engineering, October 1986, pp. 369-376.
28. Nowak, J. and Krueger, R. F., The Effect of Mud Filtrates and Mud Particles upon the
Permeabilities of Cores, Drilling and Production Practice, API, 1951, p. 164.
29. Krueger, R. F. and Vogel, L. C., Damage to Sandstone Cores by Particles from Drilling Fluids,
Drilling and Production Practices, API, 1954.
30. Khiler, K. C. and Fogler, H. S., Water Sensitivity of Sandstones, SPEJ 55, 1983.
31. Gray, D. H. and Rex, R. W., Formation Damage in Sandstones Caused by Clay Dispersion and
Migration, Paper presented at the 14th Netherlands Conference on Clays and Clay Minerals,
London.
32. Sharma, M. M. and Yortsos, Y. C., Permeability Impairment Due to Fine Migration in
Sandstones, Seventh SPE Symposium on Formation Damage Control, February 26-27, 1986,
pp. 91-102.
BAKER HUGHES DRILLING FLUIDS
REFERENCE MANUAL
REVISION 2006. 11-27