BAKER HUGHES - Drilling Fluids Reference Manual

HYDRAULICS
REFERENCES
1. ADVANTAGE SM Training Manual, Baker Hughes Drilling Fluids
2. ADVANTAGE SM “Help”, ADVANTAGE SM Engineering Software
3. Kelco Oil Field Group Inc., Rheology Technical Bulletin, 1994.
4. API Bulletin 13D, The Rheology of Oil-Well Drilling Fluids, (May 1985 Edition),
American Petroleum Institute, Dallas.
5. Burkhardt, J. A., Wellbore Pressure Surges Produced by Pipe Movement, Journal of Petroleum
Technology, June 1961.
6. Dodge, D. W. and Metzner, A. B., Turbulent Flow NonNewtonian Systems, American Institute
of Chemical Engineering Journal, 5 (2), June 1959.
7. Fann Instrument Corporation, Operating Instructions - Fann Viscometers.
8. Fontenot, J. E. and Clark, R. K., An Improved Method for Calculating Swab and Surge
Pressures in a Drilling Well, SPE Journal, October 1964.
9. Gray, G. R. and Darley, H. C. H., Composition and Properties of Oil Well Drilling Fluids, Gulf
Publishing Co., 1979.
10. Hopkin, E. A., Factors Affecting Cuttings Removal During Rotary Drilling, Journal of
Petroleum Technology, June 1967.
11. Schuh, F. J., Computer Makes Surge Pressure Calculations Useful, Oil and Gas Journal, August
3, 1964.
12. Theory and Applications of Drilling Fluid Hydraulics, Exploration Logging, Inc., July 1983.
13. Walker, R. E and Korry, D. E., Field Method of Evaluating Annular Performance of Drilling
Fluids, SPE, Paper 4321, 1973.
14. Walker, R. E. and Mayes, T. M., Design of Muds for Carrying Capacity, Journal of Petroleum
Technology, July 1975.
BAKER HUGHES DRILLING FLUIDS
REFERENCE MANUAL
REVISION 2006 9-40