Fix Dell Laser Printer Error Code 004-332
- Page 2 and 3: Error Code 004-332 is in general im
- Page 4: Solution 3: Removing of imaging dru
<strong>Error</strong> <strong>Code</strong> <strong>004</strong>-<strong>332</strong> is in general implies a<br />
mechanical error inside your <strong>Dell</strong> <strong>Printer</strong>. Dial <strong>Dell</strong><br />
<strong>Printer</strong> Online Support Number to get instantaneous<br />
help for this error. To <strong>Fix</strong> <strong>Dell</strong> <strong>Laser</strong> <strong>Printer</strong> <strong>Error</strong><br />
<strong>Code</strong> <strong>004</strong>-<strong>332</strong>, you need exact guidance. This error<br />
might relate to toner cartridge of your printer. When<br />
the toner cartridge is not seated properly, this error<br />
code appears. If the toners are also not been locked<br />
properly, this error may come up
Solution 1: Switch off the printer<br />
The first and foremost thing you need to do is to turn the printer off for<br />
almost 10 seconds.<br />
After waiting for a moment, turn the printer on and check if you still having<br />
this error or not.<br />
Solution 2: Reset all the toner cartridges<br />
After resetting of printer if the error recurs, reset all the toner cartridges.<br />
Turn off your printer and make the toner cartridges vulnerable for cleaning.<br />
Use a clean cotton cloth to clean the printer’s toner cartridges thoroughly.<br />
You need to also make sure whether all the orange plastic covers have been<br />
removed or not. It not, removes them from the developer rollers.
Solution 3: Removing of imaging drum<br />
First of all, you need to turn your printer off followed by disconnecting all the<br />
power cables from the wall outlet.<br />
Next you need to remove the imaging drum. Make sure that the developer<br />
rotor frame is not bent.<br />
If it is bent, move to the next step for efficient troubleshooting.<br />
Solution 4: Reconnecting of the power cables<br />
Firstly, open the front cover of your printer and push the toner cartridge gently.<br />
Now make sure whether the carousel moves freely through the cartridge handle or<br />
not.<br />
Next you need to reconnect all the power cables and turn the printer on.<br />
Finally, after turning on check whether the error recurs or not.