Agrodieren.be agricultural equipment and yard catalog 2018

​
​
​
Milking Hygiene
Udder Hair Remover PREVENTA
with gas bottle connection
• Preventa removes udder hair quickly and without causing pain by a „cool“ flame (approx. 200 °C)
• the bent torch allows ergonomic working in an upright position • the well thought-out design
of the device with its standby-lever guarantees a quick and safe use. • eliminates pathogens like
bacteria and viruses completely • helps to prevent mastitis and the Johne’s disease • shortens
preparation time before milking • hairless udders are easier to clean • improves the general
udder hygiene • incl. pressure reducer for gas bottle connection
​
ref. no.
description
​
€
15675 PREVENTA with 3 m hose, gas canister connector and angled wand (100 cm) 1/50 ​
15687 Pressure reducer for gas canister connection 1 ​
15687
Udder Hair Remover PREVENTA
with gas cylinder connection
• the gas cartridge of 600 ml can be ordered separately • 600ml is enough for 2 – 3
operating hours (according to consumption) • with the belt attachment, that is included
in delivery, operation with gas cartridges becomes easy and time-saving
gas cartridge connector
​
ref. no.
description
​
€
15676 PREVENTA with 1.5 m hose, gas cartridge connector and angled wand (100 cm) 1/50 ​
15683 Gas cartridge propane/butane 340 g (600 ml) 1/12 ​
TailWell2® Power Tail Trimmer
The logical further development of the successful model from New Zealand!
• makes the arduous work involved with cutting hair on the tails of dairy cows easier
• Twice annual removal of cow tail hair that is contaminated with faeces and urine allows
for optimal hygiene of livestock, milk and milker. • Pre-cutting the hair is not necessary
even in the case of heavy soiling or crusting. • works quietly and creates a smooth haircut
in a maximum of 4 seconds per tail • principle: It works on the principle of an outer blade
rotating around an inner one, therefore there is no risk of injury to the animal or the
operator. • more powerful battery – up to 200 tail shears with just one charge • The
in-house developed grinding paste supplied allows for easy and simple grinding of the
blades even by inexperienced users (necessary after 1000 to 2000 shears). • fits virtually
all battery-powered screwdrivers operating at min. 14 Volt, 1,250 rpm (battery
screwdriver not included) • supplied in a handy plastic case for safe storage
• includes DVD and handbook
18251
18241
​
ref. no.
description
​
€
18250 TailTrimmer II 1/10 ​
18251 Spare blade for TailTrimmer II 1 ​
18252 Sharpening paste for TailTrimmer 1 ​
1850488 Constanta Lube Oil, 100 ml 1/50/200 ​
18241 Spare blade for TailTrimmer I (previous model) 1 ​
77