Սառը միջուկային սինթեզի, Նիկոլա Տեսլա էներգիան գոյություն ունի, բացի տերմոդինամիկ ազատ էներգիայից... = իսկապես կեղծ գիտություն՞

Copy & Paste 6: Difference 2
• -->> cont Torsion vs Thz DIFFERENCE: G- Characteristic Thz imprinting
processes: ●i-Use water as medium:
• Example of imprinting by placing original essence matter & new medium to
be imprinted in a confined space: 1-Sub/SuperCritical water type pressured
and high temperature treatment, 2-Simultaneously or immediately followed
by exposure to Constant Electric field-EM wave(mostly in UV, Microwave, FIR,
Thz, ELF/ULF range or light frequency- or also their short pulse exposure),
3-Distillation & condensation, Accentuated sudden change of conditions,
4-Repetition of above process over and over. But Torsion/Scalar imprinting is
more like prolonged exposure of essence matter's electric field or resonating
frequency in EM pulse to new medium.
• ●ii-But sometimes mere soaking/coating matter with "oscillating water"
under ambient pressure & temperature also seems to do the temporary job,
• ●iii-Can get same effect by simply coating nano particles of certain Thz/FIR
emitting minerals like titanium without above imprinting process, done by
semi-nano size shot peening to fuse with substrate matter(Y Hirata+),
●iv-Thz methods seem to make matters bioactive more effectively than
Torsion method when imprinting into new medium made of Plastic, Fabric,
Rubber, Paint, Feather, Micro crystals, For details see report[Four level of Low
Cost..] and look up "Phase Catalyst Water" -->> cont: 298